Pipeline Design And Installation

Author : Qiang Bai,Yong Bai
Publisher : Gulf Professional Publishing
Page : 824 pages
File Size : 46,5 Mb
Release : 2014-02-18
Category : Technology & Engineering
ISBN : 9780123868893

Get Book

Subsea Pipeline Design, Analysis, and Installation by Qiang Bai,Yong Bai Pdf

As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. Gain expert coverage of international design codes Understand how to design pipelines and risers for today's deepwater oil and gas Master critical equipment such as subsea control systems and pressure piping

Author : Tian Ran Lin, PhD,Boyun Guo,,Shanhong Song, Ph.D.,Ali Ghalambor, PhD,Jacob Chacko
Publisher : Elsevier
Page : 304 pages
File Size : 46,5 Mb
Release : 2005-04-25
Category : Technology & Engineering
ISBN : 9780080456904

Get Book

Offshore Pipelines by Tian Ran Lin, PhD,Boyun Guo,,Shanhong Song, Ph.D.,Ali Ghalambor, PhD,Jacob Chacko Pdf

Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering. * Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety. * Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner. * Deepwater pipelining is a new technology developed in the past ten years and growing quickly.

Author : American Society of Civil Engineers. HDD Design Guideline Task Committee
Publisher : Amer Society of Civil Engineers
Page : 67 pages
File Size : 55,7 Mb
Release : 2005
Category : Technology & Engineering
ISBN : 0784408041

Get Book

Pipeline Design for Installation by Horizontal Directional Drilling by American Society of Civil Engineers. HDD Design Guideline Task Committee Pdf

This volume addresses the design of major pipeline or duct segments to be installed by horizontal directional drilling (HDD). This Manual of Practice, which covers topics specifically related to HDD installation, was prepared by a committee of senior engineers who are leaders in the development of HDD techniques and practices. HDD is a trenchless excavation method that is accomplished in three phases and uses a specialized horizontal drilling rig with ancillary tools and equipment. This Manual is meant to be a guide for design engineers with previous experience and knowledge of the HDD installation process and pipeline design methods. Topics covered include: predesign surveys; drilled path design; pipe design; construction impact; and as-built documentation.

Author : Mikael Braestrup,Jan B. Andersen,Lars Wahl Andersen,Mads B. Bryndum,Niels-J Rishøj Nielsen
Publisher : John Wiley & Sons
Page : 384 pages
File Size : 42,5 Mb
Release : 2009-02-12
Category : Technology & Engineering
ISBN : 9781405148740

Get Book

Design and Installation of Marine Pipelines by Mikael Braestrup,Jan B. Andersen,Lars Wahl Andersen,Mads B. Bryndum,Niels-J Rishøj Nielsen Pdf

This comprehensive handbook on submarine pipeline systems covers a broad spectrum of topics from planning and site investigations, procurement and design, to installation and commissioning. It considers guidelines for the choice of design parameters, calculation methods and construction procedures. It is based on limit state design with partial safety coefficients.

Author : Mo Mohitpour,Hossein Golshan,Matthew Alan Murray
Publisher : American Society of Mechanical Engineers
Page : 768 pages
File Size : 49,8 Mb
Release : 2007
Category : Technology & Engineering
ISBN : UOM:39015069231101

Get Book

Pipeline Design & Construction by Mo Mohitpour,Hossein Golshan,Matthew Alan Murray Pdf

This third edition of this highly successful volume is fully updated and includes new information on buoyancy control, Trenchless Crossing methods, as well as on Compressor Fuel Calculations and Optimization, Hydrotesting and LPG Pipelining. This book offers straightforward, practical techniques for pipeline design and construction, making it an ideal professional reference, training tool, or comprehensive text. The authors present the various elements that make up a single-phase liquid and gas pipeline system, including how to design, construct, commission, and assess pipelines and related facilities. They discuss gas and liquid transmission, compression, pumps, protection and integrity, procurement services, and the management of pipeline projects. More complex specialty fluids are also covered, including CO2, H2, slurry and multi-products. (Publisher).

Author : T. J. Hovland,Mohammad Najafi
Publisher : Amer Society of Civil Engineers
Page : 271 pages
File Size : 54,9 Mb
Release : 2009
Category : Technology & Engineering
ISBN : 0784410542

Get Book

Inspecting Pipeline Installation by T. J. Hovland,Mohammad Najafi Pdf

Prepared by the Pipeline Division of ASCE This manual describes successful construction methods and procedures for installing common types of pipes used to transport waterlike fluids. Inspecting Pipeline Installation focuses on the needs of field personnel, constructors, and inspectors. It assumes the pipeline design is complete, decisions on alternatives are resolved, and the designer's concepts are now ready for conversion to a real project. Pipeline construction is complex and demanding and requires the services of skilled contractors and craftsmen. Construction quality control and assurance are strict job requirements. This manual has two main purposes. First, it provides an educational tool for readers with limited experience. Second, it consolidates a wealth of practical pipeline installation information into one volume. This book covers introductory and advanced topics. It provides guidance for those with limited technical backgrounds, as well as those without specific working knowledge of a variety of pipe materials. Nontechnical personnel needing basic information regarding the pipeline installation process will also find the manual useful.

Author : E. Shashi Menon
Publisher : Gulf Professional Publishing
Page : 576 pages
File Size : 54,7 Mb
Release : 1978-06-26
Category : Technology & Engineering
ISBN : 0123838541

Get Book

Pipeline Planning and Construction Field Manual by E. Shashi Menon Pdf

Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. Back-of-the envelope calculations Checklists for maintenance operations Checklists for environmental compliance Simulations, modeling tools and equipment design Guide for pump and pumping station placement

Author : George A. Antaki
Publisher : CRC Press
Page : 564 pages
File Size : 42,9 Mb
Release : 2003-05-28
Category : Science
ISBN : 9780203911150

Get Book

Piping and Pipeline Engineering by George A. Antaki Pdf

Taking a big-picture approach, Piping and Pipeline Engineering: Design, Construction, Maintenance, Integrity, and Repair elucidates the fundamental steps to any successful piping and pipeline engineering project, whether it is routine maintenance or a new multi-million dollar project. The author explores the qualitative details, calculations, and t

Author : Amster K. Howard
Publisher : Unknown
Page : 280 pages
File Size : 42,8 Mb
Release : 1996-01-01
Category : Underground construction
ISBN : 0965100200

Get Book

Pipeline Installation by Amster K. Howard Pdf

Author : A. H. Mousselli
Publisher : Unknown
Page : 216 pages
File Size : 46,7 Mb
Release : 1981
Category : Gas pipelines
ISBN : UOM:39015002938895

Get Book

Offshore Pipeline Design, Analysis, and Methods by A. H. Mousselli Pdf

Author : Philip Ellenberger
Publisher : Elsevier
Page : 412 pages
File Size : 50,8 Mb
Release : 2014-01-22
Category : Technology & Engineering
ISBN : 9780124169685

Get Book

Piping and Pipeline Calculations Manual by Philip Ellenberger Pdf

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. Updates to major codes and standards such as ASME B31.1 and B31.12 New methods for calculating stress intensification factor (SIF) and seismic activities Risk-based analysis based on API 579, and B31-G Covers the Pipeline Safety Act and the creation of PhMSA

Author : Eng-Bin Ng
Publisher : Partridge Publishing Singapore
Page : 602 pages
File Size : 53,9 Mb
Release : 2019-07-16
Category : Technology & Engineering
ISBN : 9781543751451

Get Book

Subsea Rigid Pipelines – Methods of Installation by Eng-Bin Ng Pdf

This book is about the various methods of installing rigid subsea/submarine pipelines, such as the common methods using S-lay, J-lay, and reel-lay vessels. Other methods like the surface tow, bottom pull, and various other pipeline tow methods are also utilized. It also addresses supplementary activities required as part of a pipeline installation program, such as pipe manufacture and coating, seabed intervention, riser installation, pipeline precommissioning, and pipeline repairs. This book was written for students and newcomers to the oil and gas industry who have little or no knowledge of pipeline construction. Unlike other technical books on pipelines, this one does not address the detailed design of pipelines. Instead, it provides an overview of construction methodologies for subsea pipelines. As such, this book will provide the readers with a different perspective by providing a practical and illustrative approach to explain and illustrate how subsea pipelines can be installed through various methods. The author has used examples from some of his past projects. Where available, he also highlighted the various aspects of the work, and in some cases, he has provided the lessons that he learned from his past experiences so that readers may learn from the author’s experiences too.

Author : James Moody
Publisher : CRC Press
Page : 358 pages
File Size : 54,7 Mb
Release : 2019-03-13
Category : House & Home
ISBN : 9780429891656

Get Book

Design and Construction of Laboratory Gas Pipelines by James Moody Pdf

This new volume, Design and Construction of Laboratory Gas Pipelines: A Practical Reference for Engineers and Professionals, focuses on design and installation of laboratory gas pipelines. It instructs design engineers, laboratory managers, and installation technicians on how to source the information and specifications they require for the design and installation of laboratory gas systems suitable for their intended use. The current use of specifications predominantly taken from medical gas standards for this type of work is not always suitable; these standards are for use with medical grade gases that have a purity level of 99.5%. The purity levels required in laboratories, however, start at 99.9% for general industrial use through to 99.9995% (Ultra High Purity (UHP)) and higher. Regular medical gas standards are also unsuitable for use with the oxidizing, flammable, and, in some instances, toxic gases that are regularly encountered in laboratories. As need for gas purity increases, the methodology used to design a piping system must vary to meet those parameters, and this reference provides the necessary information and resources. There are no comprehensive single sources of technical references currently available in this market, states the author, and the generally supplied specifications provided to the construction industry are usually generic and not specifically targeted for the gases in use. The results provide extremely poor quality designs and, in some instances, unusable systems. With over 40 years of specialization in the industry from project management to systems design, testing, and commissioning of projects with values in excess of $15 million, the author comprehensively fills that gap with this rich resource. Key features • provides information on types of laboratories that use laboratory gases and the equipment needed • explains the various methods of construction and the materials used to ensure that the purity of the gases remains as supplied from the manufacturers • incorporates the design methodology used to meet the various requirements of the laboratory and the information required to ensure that the correct engineering is provided • presents information on the purity levels of the gases and the data on the equipment used for pipelines and compatibility issues • presents an example of a simple laboratory gas specification that provides guidelines on the information necessary to provide a set of design documents

Author : Boyun Guo,,Shanhong Song, Ph.D.,Ali Ghalambor, PhD,Tian Ran Lin, PhD
Publisher : Gulf Professional Publishing
Page : 400 pages
File Size : 44,5 Mb
Release : 2013-07-24
Category : Technology & Engineering
ISBN : 9780123984920

Get Book

Offshore Pipelines by Boyun Guo,,Shanhong Song, Ph.D.,Ali Ghalambor, PhD,Tian Ran Lin, PhD Pdf

The development of oil and gas fields offshore requires specialized pipeline equipment. The structures must be strong enough to with stand the harshest environments, and ensure that production is not interrupted and remains economically feasible. However, recent events in the Gulf of Mexico have placed a new importance on maintenance and reliability. A new section; Condition Based Maintenance (CBM), introduces the subject of maintenance, written by Tian Ran Lin, Queensland University of Technology, and Yong Sun, CSIRO Earth Science and Resource Engineering. Two of the main objectives of CBM is maximizing reliability while preventing major or minor equipment malfunction and minimizing maintenance costs. In this new section, the authors deal with the multi-objective condition based maintenance optimization problem. CBM provides two major advantages: (1) an efficient approach for weighting maintenance objectives, and (2) a method for specifying physical methods for achieving those objectives. Maintenance cost and reliability objectives are calculated based on proportional hazards model and a control limit CBM replacement policy. Written primarily for engineers and management personnel working on offshore and deepwater oil and gas pipelines, this book covers the fundamentals needed to design, Install, and commission pipeline projects. This new section along with a thorough update of the existing chapters represents a 30% increase in information over the previous edition. Covers offshore maintenance and maintenance support system Provides the fundamentals needed to design, Install, and commission pipeline project Methods and tools to deliver cost effective maintenance cost and system reliability New section on Condition-Based Maintenance written by Tian Ran Lin, Queensland University of Technology, and Yong Sun, CSIRO Earth Science and Resource Engineering ([email protected])

Author : Mohammad Najafi
Publisher : McGraw Hill Professional
Page : 489 pages
File Size : 43,7 Mb
Release : 2005-01-17
Category : Technology & Engineering
ISBN : 9780071777438

Get Book

Trenchless Technology by Mohammad Najafi Pdf

Trenchless technology allows for the installation or renewal of underground utility systems with minimum disruption of the surface. As water and wastewater systems age or must be redesigned in order to comply with environmental regulations, the demand for this technology has dramatically increased. This is a detailed reference covering construction details, design guidelines, environmental concerns, and the latest advances in equipment, methods, and materials. * Design and analysis procedures * Design equations * Risk assessment * Soil compatibility and more