An Introduction To Petroleum Technology Economics And Politics

Author : James G. Speight
Publisher : John Wiley & Sons
Page : 337 pages
File Size : 44,5 Mb
Release : 2011-10-24
Category : Technology & Engineering
ISBN : 9781118192542

Get Book

An Introduction to Petroleum Technology, Economics, and Politics by James G. Speight Pdf

The perfect primer for both the layperson and the engineer, for the new hire and the old hand, describing, in easy-to-understand language, one of the biggest and most lucrative industries in the world. There is only one substance known to mankind that can cause wars, influence global economies, and make entire countries rich: petroleum. One teaspoon of the stuff carries enough energy to power a ton truck up a hill. It's in the news every single day, it influences our lives in ways that we cannot fathom, and it is the most important commodity in the world. But how much does the average person, even the average engineer, know about it? This book describes the petroleum industry, in easy-to-understand language, for both the layperson and engineer alike. From the economics of searching for oil and gas to the pitfalls of drilling and production, getting it out of the ground, into pipelines, into refineries, and, finally, into your gas tank, this book covers the petroleum industry like no other treatment before. There is coverage of pricing and the economics of this very important resource, as well, which is useful not only to engineers, but to economists and, really, anyone who uses it. From jet fuel to gasoline to natural gas and plastics, petroleum is one of the integral products of our lives. We are practically bathed it in from birth, our food is protected by it, and it even has healing properties. Learn all about this incredible substance and its fascinating history and highly debated future. An Introduction to Petroleum Technology, Economics, and Politics: Gives a thorough summary of the petroleum and natural gas industry, from prospect to production to pipeline New technologies, such as directional and underbalanced drilling, are covered, in easy-to-understand language Useful not only for newcomers and laypersons, but for engineers and students, particularly those for whom English is a second language Examines the basics of pricing and valuation

Author : James G. Speight
Publisher : Unknown
Page : 320 pages
File Size : 51,8 Mb
Release : 2010-10-10
Category : Petroleum engineering
ISBN : 076562270X

Get Book

Oil by James G. Speight Pdf

What causes the huge swings in the price of oil, and what does the future hold for the oil industry? This insightful book by a leading expert in the field explains clearly why the economics of oil must take into account that it is a depleting non-renewable resource, and the cost of extraction depends not only on the current rate of production but also on the cumulative production. The author dismisses the idea that oil economics is determined by arcane mathematical formulae, and instead reduces crude oil pricing to the basic principles of oil quality and properties, extraction, refining, and geopolitics. Speight shows how oil properties play an essential role in oil pricing and politics, and clarifies why crude oil prices behave much as any other commodity with wide price swings in times of shortage or oversupply. He examines the issue of oil reserves, and connects science, economics, and politics for an unprecedented, in-depth look at the oil industry of today and tomorrow.

Author : Charles F. Doran
Publisher : Unknown
Page : 226 pages
File Size : 42,9 Mb
Release : 1979
Category : Energy policy
ISBN : 0029077109

Get Book

Myth, Oil and Politics by Charles F. Doran Pdf

Author : Steve Isser
Publisher : Routledge
Page : 539 pages
File Size : 44,6 Mb
Release : 2016-03-02
Category : Business & Economics
ISBN : 9781317224495

Get Book

The Economics and Politics of the United States Oil Industry, 1920-1990 by Steve Isser Pdf

This book, originally published in 1996, traces the development of US government policy toward the oil industry during the 1920s and 1930s when the domestic syustem of production control was established. It then charts the deveopment and collapse of oil import controls, and the wild scramble for economic rents generated by Government regulation. It discusses the two oil crises and the ‘phantom’ Gulf War crisis, and the importance of public opinion in shaping the policy agenda. It also provides an in-depth study of Congressional oil votes from the 1950s to the 1980s and the formation of oil policy, beginning with theories of economic regulation, the role of interest groups in developing the policy agenda and the role of money in politics.

Author : Joseph P. Kalt
Publisher : Cambridge, Mass. : MIT Press
Page : 360 pages
File Size : 43,6 Mb
Release : 1981
Category : Petroleum
ISBN : STANFORD:36105037701773

Get Book

The Economics and Politics of Oil Price Regulation by Joseph P. Kalt Pdf

Author : Ustina Markus
Publisher : Bloomsbury Publishing
Page : 410 pages
File Size : 40,5 Mb
Release : 2017-09-16
Category : Business & Economics
ISBN : 9781137339720

Get Book

Oil and Gas by Ustina Markus Pdf

Oil and Gas explores the business and politics of this complex industry from a regional perspective. This book combines theory, practice and a range of international case studies to provide a comprehensive overview of energy management.

Author : M.A. Al-Sahlawi
Publisher : CRC Press
Page : 468 pages
File Size : 42,7 Mb
Release : 1992-01-22
Category : Technology & Engineering
ISBN : 0824784286

Get Book

Petroleum Economics and Engineering, Second Edition by M.A. Al-Sahlawi Pdf

Revised and updated to reflect major changes in the field, this second edition presents an integrated and balanced view of current attitudes and practices used in sound economic decision-making for engineering problems encountered in the oil industry. The volume contains many problem-solving examples demonstrating how economic analyses are applied to different facets of the oil industry.;Discussion progresses from an introduction to the industry, through principles and techniques of engineering economics, to the application of economic methods to the oil industry. It provides information on the types of crude oils, their finished products and resources of natural gas, and also summarizes worldwide oil production and consumption data.

Author : S.W. Carmalt
Publisher : Springer
Page : 118 pages
File Size : 50,6 Mb
Release : 2016-12-26
Category : Business & Economics
ISBN : 9783319478197

Get Book

The Economics of Oil by S.W. Carmalt Pdf

This book examines the ways that oil economics will impact the rapidly changing global economy, and the oil industry itself, over the coming decades. The predictions of peak oil were both right and wrong. Oil production has been constrained in relation to demand for the past decade, with a resulting four-fold increase in the oil price slowing the entire global economy. High oil prices have encouraged a small increase in oil production, and mostly from the short-lived “fracking revolution,” but enough to be able to claim that “peak oil” was a false prophecy. The high oil price has also engendered massive exploration investments, but remaining hydrocarbon stocks generally offer poor returns in energy (the energy return on investment or EROI) and financial terms, and no longer replace the reserves being produced. As a result, the economically powerful oil companies are under great pressure, both financially and politically, as oil remains the backbone of the global economy./div”Development scenarios and political pressure for growth as a means of solving economic woes both require more net energy, which is the amount of energy available after energy (and thus financial) inputs required for new sources to come on line are deducted. In today’s economy, more energy usually means more oil. Although a barrel of oil from any source may look the same, “tight oil” and oil from tar sands require much higher prices to be profitable for the producer; these expensive sources have very different economic implications from the conventional oil supplies that underpinned economic growth for most of the 20th century. The role of oil in the global economy is not easily changed. Since currently installed infrastructure assumes oil, a change implies more than just substitution of an energy source. The speed with which such basic structural changes can be made is also constrained, and ultimately themselves dependent on fossil fuel inputs. It remains unclear how this scenario will evolve, and that uncertainty adds additional economic pressure to the investment decisions that must be made. “Drill baby drill” and new pipeline projects may be attractive politically, but projections of economic and associated oil production growth based on past performance are clearly untenable.

Author : James G. Speight
Publisher : Walter de Gruyter GmbH & Co KG
Page : 476 pages
File Size : 47,9 Mb
Release : 2021-09-20
Category : Technology & Engineering
ISBN : 9783110691085

Get Book

Gas Engineering by James G. Speight Pdf

Volume 1 deals with the origins of process gases and describes recovery, properties and composition. It covers as well the shale gas, the production from hydrocarbon rich deep shale formations, being one of the most quickly expanding trends in onshore domestic gas exploration. Vol. 2: Composition and Processing of Gas Streams. Vol. 3: Uses of Gas and Effects.

Author : Hussein K. Abdel-Aal,Mohammed A. Alsahlawi
Publisher : CRC Press
Page : 488 pages
File Size : 44,6 Mb
Release : 2013-12-14
Category : Science
ISBN : 9781466506664

Get Book

Petroleum Economics and Engineering, Third Edition by Hussein K. Abdel-Aal,Mohammed A. Alsahlawi Pdf

This book explains how to apply economic analysis to the evaluation of engineering challenges in the petroleum industry. Discussion progresses from an introduction to the industry, through principles and techniques of engineering economics, to the application of economic methods. Packed with real-world examples and case studies demonstrating how to calculate rate of return, discounted cash flow, payout period, and more, Petroleum Economics and Engineering, Third Edition assists petroleum engineers, chemical engineers, production workers, management, and executives in sound economic decision-making regarding the design, manufacture, and operation of oil and gas plants, equipment, and processes. The fully revised third edition is updated to reflect key advancements in petroleum technology and expanded to include chapters on middle stream operations, known as surface petroleum operations (SPO), and natural gas processing and fractionation. By looking globally at the hydrocarbon industry, the improved text offers the reader a more complete picture of the petroleum sector, which includes the global processes of exploration, production, refining, and transportation.

Author : David Glasner
Publisher : Unknown
Page : 360 pages
File Size : 48,5 Mb
Release : 1985
Category : Business & Economics
ISBN : UOM:39015010415787

Get Book

Politics, Prices, and Petroleum by David Glasner Pdf

Author : Francis A. Giuliano
Publisher : Unknown
Page : 194 pages
File Size : 40,5 Mb
Release : 1989-01-01
Category : Technology & Engineering
ISBN : 0134743547

Get Book

Introduction to Oil and Gas Technology by Francis A. Giuliano Pdf

Author : James G. Speight
Publisher : CRC Press
Page : 942 pages
File Size : 43,9 Mb
Release : 2014-02-26
Category : Science
ISBN : 9781439873908

Get Book

The Chemistry and Technology of Petroleum by James G. Speight Pdf

With demand for petroleum products increasing worldwide, there is a tendency for existing refineries to seek new approaches to optimize efficiency and throughput. In addition, changes in product specifications due to environmental regulations greatly influence the development of petroleum refining technologies. These factors underlie the need for t

Author : S.W. Carmalt
Publisher : Unknown
Page : 118 pages
File Size : 45,6 Mb
Release : 2017
Category : Economic development
ISBN : 3319478184

Get Book

The Economics of Oil by S.W. Carmalt Pdf

Author : Institute of Petroleum (IP)
Publisher : Unknown
Page : 504 pages
File Size : 52,5 Mb
Release : 2000-09-13
Category : Science
ISBN : UVA:X004523014

Get Book

Modern Petroleum Technology, Set by Institute of Petroleum (IP) Pdf

Reflecting the many changes in the technology of the oil and gas industry since its last publication in 1984, this new edition of Modern Petroleum Technology is the most authoritative and thoroughly up-to-date review of technical expertise employed across the whole of the international oil and gas industry. Written by leading international experts from industry and academia, all entries have been updated and many new entries have been added for this 6th edition. The work is divided into two volumes: Upstream and Downstream. Upstream examines the different stages of the exploration and production processes involved in the location and extraction of raw materials, including the latest applications employed in modern seismic technology and the production of heavy oils. Downstream covers the process of refining the raw material, and producing and supplying the end product, from refineries to service stations. Both volumes deal with all aspects of their area of petroleum technology, from the innovations in technology to the environmental issues surrounding its practical application. Modern Petroleum Technology considers the current challenges and opportunities presented by new technology, enabling everyone in the industry, from the busy chief executive to the petroleum engineer, to stay in touch with developments outside their own area of expertise. Modern Petroleum Technology's concise and comprehensive overview will also be of special value to analysts, strategists, lecturers and students, oil and gas consultants, and legal and financial service providers.