Balancing And Sequencing Of Assembly Lines

Author : Armin Scholl
Publisher : Physica
Page : 344 pages
File Size : 53,6 Mb
Release : 1999-02-26
Category : Business & Economics
ISBN : UOM:39015048947264

Get Book

Balancing and Sequencing of Assembly Lines by Armin Scholl Pdf

The book deals with two main decision problems which arise when flow-line production systems are installed and operated. The assembly line balancing problem consists of partitioning the work, necessary to assemble the product(s), among different stations of an assembly line. If several models of a product are jointly processed on a line, this medium-term problem is connected with the short-term problem of determining an operating sequence of the models. In Part I balancing and sequencing problems are discussed, classified, and arranged within a hierarchical planning system. In the present second edition special emphasis is given to u-shaped assembly lines which are important components of modern just-in-time production systems. Part II is concerned with exact and heuristic procedures for solving those decision problems. For each problem type considered, a survey of existing procedures is given and new efficient solution methods are developed. Comprehensive numerical investigations showing the effectiveness of the new methods and their superiority over existing approaches are reported.

Author : Armin Scholl
Publisher : Physica
Page : 0 pages
File Size : 40,9 Mb
Release : 1999
Category : Business & Economics
ISBN : 366211223X

Get Book

Balancing and Sequencing of Assembly Lines by Armin Scholl Pdf

It is dealt with two main decision problems which arise when flow-line production systems are installed and operated. The assembly line balancing problem consists of partitioning the work, necessary to assemble the product(s), among different stations of an assembly line. If several models of a product are jointly processed on a line, this medium-term problem is connected with the short-term problem of determining an operating sequence of the models. In Part I balancing and sequencing problems are discussed, classified, and arranged within a hierarchical planning system. In the second edition special emphasis is given to u-shaped assembly lines which are important components of modern just-in-time production systems. Part II is concerned with exact and heuristic procedures for solving those decision problems. For each problem type considered, a survey of existing procedures is given and new efficient solution methods are developed. Comprehensive numerical investigations are reported.

Author : Brahim Rekiek,Alain Delchambre
Publisher : Springer Science & Business Media
Page : 166 pages
File Size : 50,9 Mb
Release : 2006-04-21
Category : Technology & Engineering
ISBN : 9781846281143

Get Book

Assembly Line Design by Brahim Rekiek,Alain Delchambre Pdf

Efficient assembly line design is a problem of considerable industrial importance. Assembly Line Design will be bought by technical personnel working in design, planning and production departments in industry as well as managers in industry who want to learn more about concurrent engineering. This book will also be purchased by researchers and postgraduate students in mechanical, manufacturing or micro-engineering.

Author : Celso Gustavo Stall Sikora
Publisher : Springer Gabler
Page : 178 pages
File Size : 40,7 Mb
Release : 2022-03-10
Category : Business & Economics
ISBN : 3658362812

Get Book

Assembly-Line Balancing under Demand Uncertainty by Celso Gustavo Stall Sikora Pdf

Assembly lines are productive systems, which are very efficient for homogeneous products. In the automotive industry, an assembly line is used in the production of several vehicle variants, including numerous configurations, options, and add-ins. As a result, assembly lines must be at the same time specialized to provide high efficiency, but also flexible to allow the mass customization of the vehicles. In this book, the planning of assembly lines for uncertain demand is tackled and optimization algorithms are offered for the balancing of such lines. Building an assembly line is a commitment of several months or even years, it is understandable that the demand will fluctuate during the lifetime of an assembly line. New products are developed, others are removed from the market, and the decision of the final customer plays a role on the immediate demand. Therefore, the variation and uncertainty of the demand must be accounted for in an assembly line. In this book, methods dealing with random demand or random production sequence are presented, so that the practitioners can plan more robust and efficient production systems.

Author : Mitsuo Gen,Runwei Cheng,Lin Lin
Publisher : Springer Science & Business Media
Page : 692 pages
File Size : 40,8 Mb
Release : 2008-07-10
Category : Technology & Engineering
ISBN : 9781848001817

Get Book

Network Models and Optimization by Mitsuo Gen,Runwei Cheng,Lin Lin Pdf

Network models are critical tools in business, management, science and industry. “Network Models and Optimization” presents an insightful, comprehensive, and up-to-date treatment of multiple objective genetic algorithms to network optimization problems in many disciplines, such as engineering, computer science, operations research, transportation, telecommunication, and manufacturing. The book extensively covers algorithms and applications, including shortest path problems, minimum cost flow problems, maximum flow problems, minimum spanning tree problems, traveling salesman and postman problems, location-allocation problems, project scheduling problems, multistage-based scheduling problems, logistics network problems, communication network problem, and network models in assembly line balancing problems, and airline fleet assignment problems. The book can be used both as a student textbook and as a professional reference for practitioners who use network optimization methods to model and solve problems.

Author : John Leonard Cameron Macaskill
Publisher : Unknown
Page : 0 pages
File Size : 51,9 Mb
Release : 1969
Category : Assembly-line methods
ISBN : OCLC:1429241120

Get Book

The Application of Computers to the Balancing and Sequencing of Assembly Lines by John Leonard Cameron Macaskill Pdf

Author : Nick T. Thomopoulos
Publisher : Springer Science & Business Media
Page : 152 pages
File Size : 50,8 Mb
Release : 2013-09-11
Category : Business & Economics
ISBN : 9783319013992

Get Book

Assembly Line Planning and Control by Nick T. Thomopoulos Pdf

​Assembly Line Planning and Control describes the basic fundamentals of assembly lines for single model lines, mixed model make-to-stock lines, mixed model make-to-order lines and for one-station assembly. The book shows how to select the quantity of units to schedule for a shift duration, compute the number of operators needed on a line, set the conveyor speed, coordinate the main line with sub-assembly lines, assign the work elements to the operators on the line, sequence the models down the line, sequence the jobs down the line, calculate the part and component requirements for a line and for each station, determine the replenish needs of the parts and components from the suppliers, compute the similarity between the models being produced and show applications, use learning curves to estimate time and costs of assembly, and measure the efficiency of the line. The material is timeless and the book will never become obsolete. The author presents solutions with easy-to-understand numerical examples that can be applied to real-life applications.​

Author : Waldemar Grzechca
Publisher : BoD – Books on Demand
Page : 266 pages
File Size : 53,7 Mb
Release : 2011-08-17
Category : Technology & Engineering
ISBN : 9789533079950

Get Book

Assembly Line by Waldemar Grzechca Pdf

An assembly line is a manufacturing process in which parts are added to a product in a sequential manner using optimally planned logistics to create a finished product in the fastest possible way. It is a flow-oriented production system where the productive units performing the operations, referred to as stations, are aligned in a serial manner. The present edited book is a collection of 12 chapters written by experts and well-known professionals of the field. The volume is organized in three parts according to the last research works in assembly line subject. The first part of the book is devoted to the assembly line balancing problem. It includes chapters dealing with different problems of ALBP. In the second part of the book some optimization problems in assembly line structure are considered. In many situations there are several contradictory goals that have to be satisfied simultaneously. The third part of the book deals with testing problems in assembly line. This section gives an overview on new trends, techniques and methodologies for testing the quality of a product at the end of the assembling line.

Author : Frank-Lothar Krause
Publisher : Springer Science & Business Media
Page : 719 pages
File Size : 50,9 Mb
Release : 2007-04-24
Category : Technology & Engineering
ISBN : 9783540698203

Get Book

The Future of Product Development by Frank-Lothar Krause Pdf

These proceedings represent trends in Product Development concerning industrial vendors and scientific research aspects. Coverage includes the following topics are covered: Design Theory, Product Design, Requirements, Collaborative Engineering, Complex Design, Mechatronics, Reverse Engineering, Virtual Prototyping, CAE, KBE and PLM. The papers presented in this book show that answers can only be composed out of a variety of solutions where psychological, economical and technical research results are taken into account.

Author : Boris Sokolov,Dmitry Ivanov,Alexandre Dolgui
Publisher : Springer Nature
Page : 274 pages
File Size : 51,6 Mb
Release : 2020-06-08
Category : Business & Economics
ISBN : 9783030431778

Get Book

Scheduling in Industry 4.0 and Cloud Manufacturing by Boris Sokolov,Dmitry Ivanov,Alexandre Dolgui Pdf

This book has resulted from the activities of IFAC TC 5.2 “Manufacturing Modelling for Management and Control”. The book offers an introduction and advanced techniques of scheduling applications to cloud manufacturing and Industry 4.0 systems for larger audience. This book uncovers fundamental principles and recent developments in the theory and application of scheduling methodology to cloud manufacturing and Industry 4.0. The purpose of this book is to present recent developments in scheduling in cloud manufacturing and Industry 4.0 and to systemize these developments in new taxonomies and methodological principles to shape this new research domain. This book addresses the needs of both researchers and practitioners to uncover the challenges and opportunities of scheduling techniques’ applications to cloud manufacturing and Industry 4.0. For the first time, it comprehensively conceptualizes scheduling in cloud manufacturing and Industry 4.0 systems as a new research domain. The chapters of the book are written by the leading international experts and utilize methods of operations research, industrial engineering and computer science. Such a multi-disciplinary combination is unique and comprehensively deciphers major problem taxonomies, methodologies, and applications to scheduling in cloud manufacturing and Industry 4.0.

Author : Celso Gustavo Stall Sikora
Publisher : Springer Nature
Page : 190 pages
File Size : 43,8 Mb
Release : 2022-01-11
Category : Business & Economics
ISBN : 9783658362829

Get Book

Assembly-Line Balancing under Demand Uncertainty by Celso Gustavo Stall Sikora Pdf

Assembly lines are productive systems, which are very efficient for homogeneous products. In the automotive industry, an assembly line is used in the production of several vehicle variants, including numerous configurations, options, and add-ins. As a result, assembly lines must be at the same time specialized to provide high efficiency, but also flexible to allow the mass customization of the vehicles. In this book, the planning of assembly lines for uncertain demand is tackled and optimization algorithms are offered for the balancing of such lines. Building an assembly line is a commitment of several months or even years, it is understandable that the demand will fluctuate during the lifetime of an assembly line. New products are developed, others are removed from the market, and the decision of the final customer plays a role on the immediate demand. Therefore, the variation and uncertainty of the demand must be accounted for in an assembly line. In this book, methods dealing with random demand or random production sequence are presented, so that the practitioners can plan more robust and efficient production systems.

Author : Yuchen Li
Publisher : Springer Nature
Page : 164 pages
File Size : 44,6 Mb
Release : 2022-09-10
Category : Technology & Engineering
ISBN : 9789811942150

Get Book

Assembly Line Balancing under Uncertain Task Time and Demand Volatility by Yuchen Li Pdf

This book introduces several mathematical models in assembly line balancing based on stochastic programming and develops exact and heuristic methods to solve them. An assembly line system is a manufacturing process in which parts are added in sequence from workstation to workstation until the final assembly is produced. In an assembly line balancing problem, tasks belonging to different product models are allocated to workstations according to their processing times and precedence relationships among tasks. It incorporates two features, uncertain task times, and demand volatility, separately and simultaneously, into the conventional assembly line balancing model. A real-life case study related to the mask production during the COVID-19 pandemic is presented to illustrate the application of the proposed framework and methodology. The book is intended for graduate students who are interested in combinatorial optimizations in manufacturing with uncertain input.

Author : Lawrence D. Burns,Carlos Daganzo
Publisher : Unknown
Page : 54 pages
File Size : 43,8 Mb
Release : 1985
Category : Assembly-line methods
ISBN : NWU:35556021183819

Get Book

Assembly Line Job Sequencing Principles by Lawrence D. Burns,Carlos Daganzo Pdf

Author : Behnam Malakooti
Publisher : John Wiley & Sons
Page : 1114 pages
File Size : 41,5 Mb
Release : 2014-02-03
Category : Technology & Engineering
ISBN : 9780470037324

Get Book

Operations and Production Systems with Multiple Objectives by Behnam Malakooti Pdf

The first comprehensive book to uniquely combine the three fields of systems engineering, operations/production systems, and multiple criteria decision making/optimization Systems engineering is the art and science of designing, engineering, and building complex systems—combining art, science, management, and engineering disciplines. Operations and Production Systems with Multiple Objectives covers all classical topics of operations and production systems as well as new topics not seen in any similiar textbooks before: small-scale design of cellular systems, large-scale design of complex systems, clustering, productivity and efficiency measurements, and energy systems. Filled with completely new perspectives, paradigms, and robust methods of solving classic and modern problems, the book includes numerous examples and sample spreadsheets for solving each problem, a solutions manual, and a book companion site complete with worked examples and supplemental articles. Operations and Production Systems with Multiple Objectives will teach readers: How operations and production systems are designed and planned How operations and production systems are engineered and optimized How to formulate and solve manufacturing systems problems How to model and solve interdisciplinary and systems engineering problems How to solve decision problems with multiple and conflicting objectives This book is ideal for senior undergraduate, MS, and PhD graduate students in all fields of engineering, business, and management as well as practitioners and researchers in systems engineering, operations, production, and manufacturing.

Author : Américo Azevedo
Publisher : Springer Science & Business Media
Page : 1693 pages
File Size : 53,5 Mb
Release : 2013-06-25
Category : Technology & Engineering
ISBN : 9783319005577

Get Book

Advances in Sustainable and Competitive Manufacturing Systems by Américo Azevedo Pdf

The proceedings includes the set of revised papers from the 23rd International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2013). This conference aims to provide an international forum for the exchange of leading edge scientific knowledge and industrial experience regarding the development and integration of the various aspects of Flexible Automation and Intelligent Manufacturing Systems covering the complete life-cycle of a company’s Products and Processes. Contents will include topics such as: Product, Process and Factory Integrated Design, Manufacturing Technology and Intelligent Systems, Manufacturing Operations Management and Optimization and Manufacturing Networks and MicroFactories.