Best Practices For The Use Of Simulation In Pod Curves Estimation
Best Practices For The Use Of Simulation In Pod Curves Estimation Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of Best Practices For The Use Of Simulation In Pod Curves Estimation book. This book definitely worth reading, it is an incredibly well-written.
Best Practices for the Use of Simulation in POD Curves Estimation by Bastien Chapuis,Pierre Calmon,Frédéric Jenson Pdf
This book provides best-practice guidance and practical recommendations on the use of numerical simulation for probability of detection (POD) curve estimation in the study of non-destructive testing reliability. It focuses on ultrasonic testing (UT) weld inspection but many of the principles can be applied to a broader range of techniques and situations. The first part lists and briefly describes the principal documents that establish the recommended statistical framework adapted for POD curve estimation. It also presents the most important initiatives on the model assisted probability of detection (MAPOD) approach in recent years. The second part provides details of the advantages and limitations of the simulation in this context. The third part then describes the prerequisites for the use of simulation (validation of the software, expertise of the user), and the fourth and main part offers the methodology and guidance as well as possible applications for using POD curves determined using simulation.
Structural Health Monitoring Damage Detection Systems for Aerospace by Markus G. R. Sause,Elena Jasiūnienė Pdf
This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Emerging Trends in Banking and Finance by Nesrin Ozatac,Korhan K. Gökmenoglu Pdf
This volume presents current developments in the fields of banking and finance from an international perspective. Featuring contributions from the 3rd International Conference on Banking and Finance Perspectives (ICBFP), this volume serves as a valuable forum for discussing current issues and trends in the banking and financial sectors, especially in light of the global economic challenges triggered by financial institutions. Using the latest theoretical models, new perspectives are brought to topics such as e-finance and e-banking, Islamic banking, capital flight, bank efficiency, risk assessment, bankruptcy, investment diversification, and insider trading. Offering an opportunity to explore the challenges of a rapidly changing industry, this volume will be of interest to academics, policy makers, and scholars in the fields of banking, insurance, and finance.
Precision Metal Additive Manufacturing by Richard Leach,Simone Carmignato Pdf
Additive manufacturing (AM) is a fast-growing sector with the ability to evoke a revolution in manufacturing due to its almost unlimited design freedom and its capability to produce personalised parts locally and with efficient material use. AM companies, however, still face technological challenges such as limited precision due to shrinkage, built-in stresses and limited process stability and robustness. Moreover, often post-processing is needed due to high roughness and remaining porosity. Qualified, trained personnel are also in short supply. In recent years, there have been dramatic improvements in AM design methods, process control, post-processing, material properties and material range. However, if AM is going to gain a significant market share, it must be developed into a true precision manufacturing method. The production of precision parts relies on three principles: Production is robust (i.e. all sensitive parameters can be controlled). Production is predictable (for example, the shrinkage that occurs is acceptable because it can be predicted and compensated in the design). Parts are measurable (as without metrology, accuracy, repeatability and quality assurance cannot be known). AM of metals is inherently a high-energy process with many sensitive and inter-related process parameters, making it susceptible to thermal distortions, defects and process drift. The complete modelling of these processes is beyond current computational power, and novel methods are needed to practicably predict performance and inform design. In addition, metal AM produces highly textured surfaces and complex surface features that stretch the limits of contemporary metrology. With so many factors to consider, there is a significant shortage of background material on how to inject precision into AM processes. Shortage in such material is an important barrier for a wider uptake of advanced manufacturing technologies, and a comprehensive book is thus needed. This book aims to inform the reader how to improve the precision of metal AM processes by tackling the three principles of robustness, predictability and metrology, and by developing computer-aided engineering methods that empower rather than limit AM design. Richard Leach is a professor in metrology at the University of Nottingham and heads up the Manufacturing Metrology Team. Prior to this position, he was at the National Physical Laboratory from 1990 to 2014. His primary love is instrument building, from concept to final installation, and his current interests are the dimensional measurement of precision and additive manufactured structures. His research themes include the measurement of surface topography, the development of methods for measuring 3D structures, the development of methods for controlling large surfaces to high resolution in industrial applications and the traceability of X-ray computed tomography. He is a leader of several professional societies and a visiting professor at Loughborough University and the Harbin Institute of Technology. Simone Carmignato is a professor in manufacturing engineering at the University of Padua. His main research activities are in the areas of precision manufacturing, dimensional metrology and industrial computed tomography. He is the author of books and hundreds of scientific papers, and he is an active member of leading technical and scientific societies. He has been chairman, organiser and keynote speaker for several international conferences, and received national and international awards, including the Taylor Medal from CIRP, the International Academy for Production Engineering.
Nondestructive Testing Methods and New Applications by Mohammad Omar Pdf
Nondestructive testing enables scientists and engineers to evaluate the integrity of their structures and the properties of their materials or components non-intrusively, and in some instances in real-time fashion. Applying the Nondestructive techniques and modalities offers valuable savings and guarantees the quality of engineered systems and products. This technology can be employed through different modalities that include contact methods such as ultrasonic, eddy current, magnetic particles, and liquid penetrant, in addition to contact-less methods such as in thermography, radiography, and shearography. This book seeks to introduce some of the Nondestructive testing methods from its theoretical fundamentals to its specific applications. Additionally, the text contains several novel implementations of such techniques in different fields, including the assessment of civil structures (concrete) to its application in medicine.
Structural Health Monitoring by N. Rajic,W.K. Chiu,M. Veidt,A. Mita,N. Takeda Pdf
The book presents the proceedings of the 9th Asia-Pacific Workshop on Structural Health Monitoring. With the increasing worldwide emphasis on asset sustainability, there is a trend toward Condition-Based Maintenance (CBM) and Reliability-Centred Maintenance (RCM). Both approaches require diagnostic systems which detect damage and monitor structural health and/or prognostic systems that predict the future health of a structure. Keywords: Vibration Monitoring, Railway Bridge, Strain-based Damage, Turbine Blades, Crack and Temperature Sensing, Bone Degradation, Prefabricated Concrete Frame, Impact Damage in Composites, Ferroelectric Single Crystals, Evaluation of Human Injury, Automatic Damage Assessment, Metal-Composite Plates, Osseointegration, High-rise Buildings, Acoustic Emission Source. Earthquake, Wind Turbine Rotor Blades. Smart Cables, Thermal Damages, Cement Materials, Multi-parameter Monitoring, Petri Net Model, Maintenance Strategies, Load Bearing Antenna, Thin Metal Joints, Aerospace Structure.
Smart Intelligent Aircraft Structures (SARISTU) by Piet Christof Wölcken,Michael Papadopoulos Pdf
The book includes the research papers presented in the final conference of the EU funded SARISTU (Smart Intelligent Aircraft Structures) project, held at Moscow, Russia between 19-21 of May 2015. The SARISTU project, which was launched in September 2011, developed and tested a variety of individual applications as well as their combinations. With a strong focus on actual physical integration and subsequent material and structural testing, SARISTU has been responsible for important progress on the route to industrialization of structure integrated functionalities such as Conformal Morphing, Structural Health Monitoring and Nanocomposites. The gap- and edge-free deformation of aerodynamic surfaces known as conformal morphing has gained previously unrealized capabilities such as inherent de-icing, erosion protection and lightning strike protection, while at the same time the technological risk has been greatly reduced. Individual structural health monitoring techniques can now be applied at the part-manufacturing level rather than via extending an aircraft’s time in the final assembly line. And nanocomposites no longer lose their improved properties when trying to upscale from neat resin testing to full laminate testing at element level. As such, this book familiarizes the reader with the most significant develo pments, achievements and key technological steps which have been made possible through the four-year long cooperation of 64 leading entities from 16 different countries with the financial support of the European Commission.
Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure by Jaap Bakker,Dan M. Frangopol,Klaas van Breugel Pdf
This volume contains the papers presented at IALCCE2016, the fifth International Symposium on Life-Cycle Civil Engineering (IALCCE2016), to be held in Delft, The Netherlands, October 16-19, 2016. It consists of a book of extended abstracts and a DVD with full papers including the Fazlur R. Khan lecture, keynote lectures, and technical papers from all over the world. All major aspects of life-cycle engineering are addressed, with special focus on structural damage processes, life-cycle design, inspection, monitoring, assessment, maintenance and rehabilitation, life-cycle cost of structures and infrastructures, life-cycle performance of special structures, and life-cycle oriented computational tools. The aim of the editors is to provide a valuable source for anyone interested in life-cycle of civil infrastructure systems, including students, researchers and practitioners from all areas of engineering and industry.
Risk assessment is one of the main parts of complex systematic research of natural and man-made hazards and risks together with the concepts of risk analysis, risk management, acceptable risk, and risk reduction. It is considered as the process of making a recommendation on whether existing risks are acceptable and present risk control measures are adequate, and if they are not, whether alternative risk control measures are justified or will be implemented. Risk assessment incorporates the risk analysis and risk evaluation phases. Risk management is considered as the complete process of risk assessment, risk control, and risk reduction. The book reflects on the state-of-the-art problems and addresses the risk assessment to establish the criteria for ranking risk posed by different types of natural or man-made hazards and disasters, to quantify the impact that hazardous event or process has on population and structures, and to enhance the strategies for risk reduction and avoiding.
Aquananotechnology by David E. Reisner,T. Pradeep Pdf
The world’s fresh water supplies are dwindling rapidly—even wastewater is now considered an asset. By 2025, most of the world's population will be facing serious water stresses and shortages. Aquananotechnology: Global Prospects breaks new ground with its informative and innovative introduction of the application of nanotechnology to the remediation of contaminated water for drinking and industrial use. It provides a comprehensive overview, from a global perspective, of the latest research and developments in the use of nanotechnology for water purification and desalination methods. The book also covers approaches to remediation such as high surface area nanoscale media for adsorption of toxic species, UV treatment of pathogens, and regeneration of saturated media with applications in municipal water supplies, produced water from fracking, ballast water, and more. It also discusses membranes, desalination, sensing, engineered polymers, magnetic nanomaterials, electrospun nanofibers, photocatalysis, endocrine disruptors, and Al13 clusters. It explores physics-based phenomena such as subcritical water and cavitation-induced sonoluminescence, and fog harvesting. With contributions from experts in developed and developing countries, including those with severe contamination, such as China, India, and Pakistan, the book’s content spans a wide range of the subject areas that fall under the aquananotechnology banner, either squarely or tangentially. The book strongly emphasizes sorption media, with broad application to a myriad of contaminants—both geogenic and anthropogenic—keeping in mind that it is not enough for water to be potable, it must also be palatable.
Agile Processes in Software Engineering and Extreme Programming by Viktoria Stray,Klaas-Jan Stol,Maria Paasivaara,Philippe Kruchten Pdf
This open access book constitutes the proceedings of the 23rd International Conference on Agile Software Development, XP 2022, which was held in Copenhagen, Denmark, in June 2022. XP is the premier agile software development conference combining research and practice. It is a unique forum where agile researchers, practitioners, thought leaders, coaches, and trainers get together to present and discuss their most recent innovations, research results, experiences, concerns, challenges, and trends. XP conferences provide an informal environment to learn and trigger discussions and welcome both people new to agile and seasoned agile practitioners. This year’s conference was held with the theme “Agile in the Era of Hybrid Work”. The 13 full papers and 1 short paper presented in this volume were carefully reviewed and selected from 40 submissions. They were organized in topical sections named: agile practices; agile processes; and agile in the large.
