Composite Manufacturing Technology

Author : A.G. Bratukhin,V.S. Bogolyubov
Publisher : Springer Science & Business Media
Page : 458 pages
File Size : 49,5 Mb
Release : 1994-10-31
Category : Technology & Engineering
ISBN : 0412582503

Get Book

Composite Manufacturing Technology by A.G. Bratukhin,V.S. Bogolyubov Pdf

Some years ago in Paisley (Scotland) the International Conference on Composite Materials, headed by Professor I. Marshall, took place. During the conference, I presented a paper on the manufacturing and properties of the Soviet Union's composite materials. Soviet industry had made great achievements in the manufacturing of composite materials for aerospace and rocket applications. For example, the fraction of composites (predominantly carbon fibre reinforced plastics) in the large passenger aircrafts Tu-204 and 11-86 is 12-15% of the structure weight. The percentage by weight share of composites in military aircraft is greater and the fraction of composites (organic fibre reinforced plastics) used in military helicopters exceeds a half of the total structure weight. The nose parts of most rockets are produced in carbon-carbon materials. In the Soviet spacecraft 'Buran' many fuselage tubes are made of boron-aluminium composites. Carbon-aluminium is used for space mirrors and gas turbine blades. These are just a few examples of applications. Many participants at the Paisley conference suggested that the substantial Soviet experience in the field of composite materials should be distilled and presented in the form of a comprehensive reference publication. So the idea of the preparation and publication of a six volume work Soviet Advanced Composites Technology, edited by Professor I. Marshall and me, was born.

Author : Flake C Campbell Jr
Publisher : Elsevier
Page : 532 pages
File Size : 50,5 Mb
Release : 2003-12-18
Category : Technology & Engineering
ISBN : 9780080510989

Get Book

Manufacturing Processes for Advanced Composites by Flake C Campbell Jr Pdf

• One of very few books available to cover this subject area. • A practical book with a wealth of detail. This book covers the major manufacturing processes for polymer matrix composites with an emphasis on continuous fibre-reinforced composites. It covers the major fabrication processes in detail. Very few books cover the details of fabrication and assembly processes for composites. This book is intended for the engineer who wants to learn more about composite processing: any one with some experience in composites should be able to read it. The author, who has 34 years experience in the aerospace industry, has intentionally left out mathematical models for processes so the book will be readable by the general engineer. It differs from other books on composites manufacturing in focussing almost solely on manufacturing processes, while not attempting to cover materials, test methods, mechanical properties and other areas of composites.

Author : Philippe Boisse
Publisher : Woodhead Publishing
Page : 492 pages
File Size : 55,8 Mb
Release : 2015-07-29
Category : Technology & Engineering
ISBN : 9781782423201

Get Book

Advances in Composites Manufacturing and Process Design by Philippe Boisse Pdf

The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes. Outlines the advances in the different methods of composite manufacturing processes Provides extensive information on the thermo-mechanical behavior of reinforcements and composite prepregs Reviews numerical simulations of forming and flow processes, as well as pultrusion processes and modeling chemical vapor infiltration

Author : A.G. Bratukhin,V.S. Bogolyubov
Publisher : Springer Science & Business Media
Page : 442 pages
File Size : 48,7 Mb
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 9789401112680

Get Book

Composite Manufacturing Technology by A.G. Bratukhin,V.S. Bogolyubov Pdf

Some years ago in Paisley (Scotland) the International Conference on Composite Materials, headed by Professor I. Marshall, took place. During the conference, I presented a paper on the manufacturing and properties of the Soviet Union's composite materials. Soviet industry had made great achievements in the manufacturing of composite materials for aerospace and rocket applications. For example, the fraction of composites (predominantly carbon fibre reinforced plastics) in the large passenger aircrafts Tu-204 and 11-86 is 12-15% of the structure weight. The percentage by weight share of composites in military aircraft is greater and the fraction of composites (organic fibre reinforced plastics) used in military helicopters exceeds a half of the total structure weight. The nose parts of most rockets are produced in carbon-carbon materials. In the Soviet spacecraft 'Buran' many fuselage tubes are made of boron-aluminium composites. Carbon-aluminium is used for space mirrors and gas turbine blades. These are just a few examples of applications. Many participants at the Paisley conference suggested that the substantial Soviet experience in the field of composite materials should be distilled and presented in the form of a comprehensive reference publication. So the idea of the preparation and publication of a six volume work Soviet Advanced Composites Technology, edited by Professor I. Marshall and me, was born.

Author : Sanjay Mazumdar
Publisher : CRC Press
Page : 392 pages
File Size : 48,9 Mb
Release : 2002
Category : Technology & Engineering
ISBN : 0849305853

Get Book

Composites Manufacturing by Sanjay Mazumdar Pdf

Annotation Mazumdar draws on his experiences as an author, lecturer, educator, and head of a service-oriented company providing various products to the composite materials industry, in writing this textbook on composites manufacturing. The book takes the reader step-by-step from raw material selection to final part fabrication and recycling. Specific chapter topics include raw materials for part fabrication, material selection guidelines, product development, design for manufacturing, manufacturing techniques, process models, production planning and manufacturing instructions, joining of composite materials, machining and cutting of composites, cost estimation, and recycling of composites. The text is suitable for students, engineers, and researchers working in the composite materials field. Annotation c. Book News, Inc., Portland, OR (booknews.com)

Author : A. Praveen Kumar,Kishor Kumar Sadasivuni,Bandar AlMangour,Mohd Shukry Abdul bin Majid
Publisher : Springer Nature
Page : 306 pages
File Size : 41,8 Mb
Release : 2021-12-08
Category : Technology & Engineering
ISBN : 9789811673771

Get Book

High-Performance Composite Structures by A. Praveen Kumar,Kishor Kumar Sadasivuni,Bandar AlMangour,Mohd Shukry Abdul bin Majid Pdf

This book covers advanced 3D printing processes and the latest developments in novel composite-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The rise in ecological anxieties has forced scientists and researchers from all over the world to find novel lightweight materials. Therefore, it is necessary to expand knowledge about the processing, applications, and challenges of 3D printing of composite materials to expanding the range of their application. This book presents an extensive survey on recent improvements in the research and development of additive manufacturing technologies that are used to make composite structures for various applications such as electronic, aerospace, construction, and biomedical applications. Advanced printing techniques including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting will be covered and discussed thoroughly in this book. This book also focuses the recent advances and challenges in polymer nanocomposite and introduces potential applications of these materials in various sectors.

Author : Sanjay Mazumdar
Publisher : CRC Press
Page : 417 pages
File Size : 52,9 Mb
Release : 2001-12-27
Category : Technology & Engineering
ISBN : 9781420041989

Get Book

Composites Manufacturing by Sanjay Mazumdar Pdf

More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental

Author : Flake C Campbell Jr
Publisher : Elsevier
Page : 616 pages
File Size : 40,7 Mb
Release : 2011-08-31
Category : Technology & Engineering
ISBN : 0080462359

Get Book

Manufacturing Technology for Aerospace Structural Materials by Flake C Campbell Jr Pdf

The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA. * All major aerospace structural materials covered: metals and composites * Focus on details of manufacture and use * Author has huge experience in aerospace industry * A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry

Author : Ulf Paul Breuer
Publisher : Springer
Page : 257 pages
File Size : 54,6 Mb
Release : 2016-05-10
Category : Technology & Engineering
ISBN : 9783319319186

Get Book

Commercial Aircraft Composite Technology by Ulf Paul Breuer Pdf

This book is based on lectures held at the faculty of mechanical engineering at the Technical University of Kaiserslautern. The focus is on the central theme of societies overall aircraft requirements to specific material requirements and highlights the most important advantages and challenges of carbon fiber reinforced plastics (CFRP) compared to conventional materials. As it is fundamental to decide on the right material at the right place early on the main activities and milestones of the development and certification process and the systematic of defining clear requirements are discussed. The process of material qualification - verifying material requirements is explained in detail. All state-of-the-art composite manufacturing technologies are described, including changes and complemented by examples, and their improvement potential for future applications is discussed. Tangible case studies of high lift and wing structures emphasize the specific advantages and challenges of composite technology. Finally, latest R&D results are discussed, providing possible future solutions for key challenges such as low cost high performance materials, electrical function integration and morphing structures.

Author : Andrew Mills
Publisher : Wiley
Page : 300 pages
File Size : 45,9 Mb
Release : 2022-03-07
Category : Technology & Engineering
ISBN : 1118369769

Get Book

Carbon Fibre Composites Manufacturing Technology and Applications by Andrew Mills Pdf

A comprehensive reference manual and introduction to composite materials and manufacturing processes Carbon Fibre Composites Manufacturing Technology and Applications provides up-to-date information on the use of carbon fibre composite materials for a range of established and emerging structural applications. Broad in scope, this unique volume covers component design, materials selection, molding processes, manufacturing automation, joining and assembly techniques, cost considerations, and more. Author Andrew Mills, a recognized design specialist with extensive practical experience in the field, thoroughly describes the manufacture of advanced lightweight composite components and reviews their application in the aerospace, automobile, motorsport, sports equipment, renewable energy and other fields. With a focus on the practical aspects of high-performance composites manufacturing and applications, the text discusses the use of cost-efficient materials and manufacturing technology for high-performance applications such as commercial and military aircraft, sports equipment, super cars, wind turbine blades, boat structures, and various others. Detailed chapters examine the advantages and disadvantages of each manufacturing process covered, material tolerances and defects, design guidelines for efficient manufacturing, emerging manufacturing technology and materials and process performance evaluation. Combines design considerations for components and structures with materials selection and manufacturing technology Covers the use of new lower-cost materials and manufacturing techniques in emerging application sectors Includes photographs and descriptions of current applications including racing cars, yachts, bridges, bicycles and wave and tidal generators Features case studies of design requirements, materials and process selection, and the benefits and challenges of various applications Presents materials design data, tables of approximate cost, and figures and flow diagrams of production processes Carbon Fibre Composites Manufacturing Technology and Applications is a valuable reference for materials, design, and manufacturing engineers, and is an excellent textbook for advanced undergraduate and graduate courses materials, mechanical, aerospace, automotive, and manufacturing engineering.

Author : Suong V. Hoa
Publisher : DEStech Publications, Inc
Page : 354 pages
File Size : 40,7 Mb
Release : 2009
Category : Technology & Engineering
ISBN : 9781932078268

Get Book

Principles of the Manufacturing of Composite Materials by Suong V. Hoa Pdf

Based on 15 years of composites manufacturing instruction, the Principles of the Manufacturing of Composite Materials is the first text to offer both a practical and analytic approach to composite manufacturing processes. It ties together key tools for analyzing the mechanics of composites with the processes whereby composite products are fabricated, whether by hand lay-up or through automated processes. The book outlines the principles of chemistry, physics, materials science and engineering and shows how these are connected to the design and production of a variety of composites, primarily polymeric. It thus provides analytic, quantitative tools to answer the questions of why certain materials are linked with specific processes, and why products are manufactured by one process rather than another. All phases of matrix material formation are explained, as are practical design details for fabrics, autoclaving, filament winding, pultrusion, liquid composite molding, hand techniques, joints and joint bonding, and more. A special section is devoted to nanocomposites. The book includes exercises for university students and practitioners.

Author : António Torres Marques,Sílvia Esteves,João P. T. Pereira,Luis Miguel Oliveira
Publisher : Springer Nature
Page : 346 pages
File Size : 46,5 Mb
Release : 2020-04-27
Category : Technology & Engineering
ISBN : 9783030445225

Get Book

Additive Manufacturing Hybrid Processes for Composites Systems by António Torres Marques,Sílvia Esteves,João P. T. Pereira,Luis Miguel Oliveira Pdf

This book focuses on the emerging additive manufacturing technology and its applications beyond state-of-the-art, fibre-reinforced thermoplastics. It also discusses the development of a hybrid, integrated process that combines additive and subtractive operations in a single-step platform, allowing CAD-to-Part production with freeform shapes using long or continuous fibre-reinforced thermoplastics. The book covers the entire value chain of this next-generation technology, from part design and materials composition to transformation stages, product evaluation, and end-of-life studies. Moreover, it addresses the following engineering issues: • Design rules for hybrid additive manufacturing; • Thermoplastic compounds for high-temperature and -strength applications; • Advanced extrusion heads and process concepts; • Hybridisation strategies; • Software ecosystems for hAM design, pre-processing, process planning, emulating and multi-axis processing; • 3D path generators for hAM based on a multi-objective optimisation algorithm that matches the recent curved adaptive slicing method with a new transversal scheme; • hAM parameters, real-time monitoring and closed-loop control; • Multiparametric nondestructive testing (NDT) tools customised for FRTP AM parts; • Sustainable manufacturing processes validated by advanced LCA/LCC models.

Author : Timothy G. Gutowski
Publisher : Wiley-Interscience
Page : 0 pages
File Size : 43,7 Mb
Release : 1997-08-01
Category : Technology & Engineering
ISBN : 047115301X

Get Book

Advanced Composites Manufacturing by Timothy G. Gutowski Pdf

A state-of-the-art look at advanced composites processing and manufacturing-from leading academic and industry experts Advanced Composites Manufacturing combines cutting-edge coverage of the scientific fundamentals of composites processing with an in-depth treatment of the major manufacturing processes for advanced composite materials. Complete with important information on such key issues as new processing areas, manufacturing process control, deformation forming, and cost-control strategies, this unique reference is essential reading for materials scientists, researchers, and engineers across a range of industry sectors. Topics covered include: * The Processing Science of Reactive Polymer Composites. * The Processing Science of Thermoplastic Composites. * The Elastic Deformation of Fiber Bundles. * Processing of Textile Preforms. * The Autoclave Processing of Composites. * Pultrusion of Composites. * Forming of Advanced Composites. * Filament Winding Process Model for Thermosetting Matrix Composites. * Liquid Composite Molding. * Process Control of Thermosetting Composites. * Joining of Composites. * Cost, Automation, and Design .

Author : Air Force Studies Board. Committee on Net Shape Technology in Aerospace Structures
Publisher : Unknown
Page : 616 pages
File Size : 48,7 Mb
Release : 1986
Category : Aerospace industries
ISBN : PSU:000021888557

Get Book

Appendix: Future composite manufacturing technology by Air Force Studies Board. Committee on Net Shape Technology in Aerospace Structures Pdf

Author : L Ye,Y.-W. Mai,Z. Su
Publisher : Woodhead Publishing
Page : 1132 pages
File Size : 43,8 Mb
Release : 2004-06
Category : Technology & Engineering
ISBN : 1855738317

Get Book

Composite Technologies for 2020 by L Ye,Y.-W. Mai,Z. Su Pdf

Annotation Over the past three decades, the terminology of composite materials has been well acknowledged by the technical community, and composite materials have been gaining exponential acceptance in a diversity of industries, serving as competitive candidates for traditional structural and functional materials to realize current and future trends imposed on high performance structures. Striking examples of breakthroughs based on utilization of composite materials are increasingly found nowadays in transportation vehicles (aircraft, space shuttle and automobile), civil infrastructure (buildings, bridge and highway barriers), and sporting goods (F1, golf club, sailboat) etc., owing to an improved understanding of their performance characteristics and application potentials, especially innovative, cost-effective manufacturing processes. As the equivalent of ICCM in the Asian-Australasian regions, the Asian-Australasian Association for Composite Materials (AACM) has been playing a vital leading role in the field of composites science and technology since its inception in 1997 in Australia. Following the excellent reputations and traditions of previous ACCMs, ACCM-4 is held in scenic Sydney, Australia, 6-9 July 2004. The theme of ACCM-4, Composites Technologies for 2020, provides a forum to present state-of-the-art achievements and recent advances in composites sciences & technologies, and discuss and identify key and emerging issues for future pursuits. By bringing together leading experts and promising innovators from the research institutions, end-use industries and academia, ACCM-4 intends to facilitate broadband knowledge sharing and identify opportunities for long-term cooperative research and development ventures. The scope of ACCM-4 is broad. It includes, but is not limited to, the following areas: Bi- composites, Ceramic matrix composites, Durability and aging, NDE and SHM Eco-composites, Manufacturing and processing technologies, Industrial applications, Interphases and interfaces, Impact and dynamic response Matrices (polymers, ceramics, and metals), Mechanical and physical properties (fatigue, fracture, micromechanics, viscoelastic behavior, buckling and failure, etc.), Metal matrix composites, Multi-functional composites, Nano-composites, Reinforcements (textiles, strand, and mat), Smart materials and structures, Technology transfer (education, training, etc.)