Constitutive And Centrifuge Modelling Two Extremes
Constitutive And Centrifuge Modelling Two Extremes Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of Constitutive And Centrifuge Modelling Two Extremes book. This book definitely worth reading, it is an incredibly well-written.
Constitutive and Centrifuge Modelling: Two Extremes by S. Springman Pdf
The extremes of constitutive and centrifuge modelling are explored here, with a range of lectures addressing specific areas of these two types of modelling as well as on specific design problems and the themes of failure, deformations and interfaces.
River dyke failure modeling under transient water conditions by Wilmer Ferney Morales Peñuela Pdf
Knowledge of the performance of river dykes during flooding is necessary when designing governmental assistance plans aimed to reduce both casualties and material damage. This is especially relevant when floods have increased in their frequency during the last decades, together with the resulting material damage and life costs. Most of previous attempts for analyzing dyke breaching during flooding have neglected to consider the soil mechanics component and the influence of infiltration and saturation changes on the failure mechanisms developed in the river dyke. This research project aimed to fill that gap in knowledge by analyzing, in a comprehensive manner, the effect of transient water conditions, represented by successive flood cycles, on the seepage conditions and subsequent breaching of dykes. Therefore, three key sub-projects were carried out: • the analysis of the results from an overflow field test, • the physical modeling of small-scaled models under an enhanced gravity field, • the numerical modeling of the flow response and the resulting stability of both the air- and water-side slopes. The results from the numerical simulations matched accurately with the results obtained with the centrifuge modeling, including the prediction of local instabilities during the flood cycles for those dykes that did not include a toe filter.
Centrifuge modelling of ground improvement for double porosity clay by Emma Jane Pooley Pdf
Double porosity soil is characterised by a soil continuum containing two distinct porosities. Typically, this consists of macro-grains (lumps) of soil that have an internal porosity defined as the intragranular porosity. The spaces between lumps are identified as intergranular voids that give rise to the intergranular porosity. Human activities such as land reclamation or mining can give rise to large areas of land with subsoil that exhibits double porosity. The need to build in, or on, these areas is increasing, due to demand for land for industrial usage, infrastructure, and residence. However, the engineering properties of such soils are challenging, and often difficult to predict due to their inhomogeneity and a lack of information about the initial or current parameters. Double porosity mining waste landfills in Northern Bohemia in the Czech Republic were studied in this project. There, decades of open-cast mining of brown coal have left vast areas of land affected by the waste overburden that has been removed and dumped in old mining pits. Redevelopment of areas affected by mining sometimes requires construction on old overburden waste spoil heaps, which consist primarily of lumps of overconsolidated clay and are therefore characterised by a double porosity soil structure. The loading response on these clayfills entails large absolute and relative deformations, which means that ground improvement is normally needed before construction begins, to ensure that both stability and service limit state requirements are met. The primary aim of this research was a comparison, through physical modelling, of ground improvement techniques on double porosity clay landfills. A secondary objective was to contribute to the understanding of the material behaviour governing response to loading and other processes on double porosity soil.
Physical Modelling in Geotechnics, Two Volume Set by Sarah Springman,Jan Laue,Linda Seward Pdf
This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions. Topics presented at the conference: Soil – Structure – Interaction; Natural Hazards; Earthquake Engineering: Soft Soil Engineering; New Geotechnical Physical; Modelling Facilities; Advanced Experimental Techniques; Comparisons between Physical and Numerical Modelling Specific Topics: Offshore Engineering; Ground Improvement and Foundations; Tunnelling, Excavations and Retaining Structures; Dams and slopes; Process Modelling; Goenvironmental Modelling; Education
Frontiers in Offshore Geotechnics II by Susan Gourvenec,David White Pdf
Frontiers in Offshore Geotechnics II comprises the Proceedings of the Second International Symposium on Frontiers in Offshore Geotechnics (ISFOG), organised by the Centre for Offshore Foundation Systems (COFS) and held at the University of Western Australia (UWA), Perth from 8 10 November 2010. The volume addresses current and emerging challenges
Sustainable Practices and Innovations in Civil Engineering by S. Ramanagopal,Madhavi Latha Gali,Kartik Venkataraman Pdf
This book presents the select proceedings of the International Conference on Sustainable Practices and Innovations in Civil Engineering (SPICE 2019). The chapters discuss emerging and current research in sustainability in different areas of civil engineering, which aim to provide solutions to sustainable development. The contents are broadly divided into the following six categories: (i) structural systems, (ii) environment and water resource systems, (iii) construction technologies, (iv)geotechnical systems, (v) innovative building materials, and (vi) transportation. This book will be of potential interest for students, researchers, and practitioners working in sustainable civil engineering related fields.
Sustainable Construction Materials and Technologies by Yoon-Moon Chun,Peter Claisse,Tarun R. Naik,Eshmaiel Ganjian Pdf
The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.
Unsaturated Soils, Two Volume Set by Eduardo E. Alonso,Antonio Gens Pdf
In recent decades the development of unsaturated soil mechanics has been remarkable, resulting in momentous advances in fundamental knowledge, testing techniques, computational procedures, prediction methodologies and geotechnical practice. The advances have spanned the full spectrum of theory and practice. In addition, unsaturated materials exhibiting complex behaviour such as residual soils, swelling soils, compacted soils, collapsing soils, tropical soils and solid wastes have been integrated in a common understanding of shared behaviour features. It is also noteworthy that unsaturated soil mechanics has proved surprisingly fruitful in expanding to other neighbouring areas such as swelling rocks, rockfill mechanics, and freezing soils. As a consequence, geotechnical engineering involving unsaturated soils can be now approached from a more rational and systematic perspective leading towards an improved and more effective practice. Unsaturated Soils contains the papers presented at the 5th International Conference on Unsaturated Soil (Barcelona, Spain, 6-8 September 2010). They report significant advances in the areas of unsaturated soil behaviour, testing techniques, constitutive and numerical modelling and applications. The areas of application include soil-atmosphere interaction, foundations, slopes, embankments, pavements, geoenviromental problems and emerging topics. They are complemented by three keynote lectures and three general reports covering general issues of modelling, testing and applications. Unsaturated Soils is a comprehensive record of the state-of-the art in unsaturated soil mechanics and a sound basis for further progress in the future. The two volumes will serve as an essential reference for academics, researchers and practitioners interested in unsaturated soils.
ICPMG2014 - Physical Modelling in Geotechnics by Christophe Gaudin,David White Pdf
The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.
Physical Models by Bill Addis,Karl-Eugen Kurrer,Werner Lorenz Pdf
Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Information Technology in Geo-Engineering by António Gomes Correia,Joaquim Tinoco,Paulo Cortez,Luís Lamas Pdf
These proceedings address the latest developments in information communication and technologies for geo-engineering. The 3rd International Conference on Information Technology in Geo-Engineering (ICITG 2019), held in Guimarães, Portugal, follows the previous successful installments of this conference series in Durham (2014) and Shanghai (2010). The respective chapters cover the following: Use of information and communications technologies Big data and databases Data mining and data science Imaging technologies Building information modelling applied to geo-structures Artificial intelligence Smart geomaterials and intelligent construction Sensors and monitoring Asset management Case studies on design, construction and maintenance Given its broad range of coverage, the book will benefit students, educators, researchers and professional practitioners alike, encouraging these readers to help take the geo-engineering community into the digital age
Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.
Physical Modelling in Geotechnics, Volume 1 by Andrew McNamara,Sam Divall,Richard Goodey,Neil Taylor,Sarah Stallebrass,Jignasha Panchal Pdf
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
The Mechanics of Soils and Foundations by John Atkinson Pdf
Ideal for undergraduates of geotechnical engineering for civil engineers, this established textbook sets out the basic theories of soil mechanics in a clear and straightforward way; combining both classical and critical state theories and giving students a good grounding in the subject which will last right through into a career as a geotechnical engineer. The subject is broken down into discrete topics which are presented in a series of short, focused chapters with clear and accessible text that develops from the purely theoretical to discussing practical applications. Soil behaviour is described by relatively simple equations with clear parameters while a number of worked examples and simple experimental demonstrations are included to illustrate the principles involved and aid reader understanding.