Corrosion Under Oil Films With Special Reference To The Cause And Prevention Of The After Corrosion Of Firearms Classic Reprint

Author : Wilbert J. Huff
Publisher : Forgotten Books
Page : 38 pages
File Size : 52,7 Mb
Release : 2017-10-20
Category : Science
ISBN : 026552010X

Get Book

Corrosion Under Oil Films, with Special Reference to the Cause and Prevention of the After-Corrosion of Firearms (Classic Reprint) by Wilbert J. Huff Pdf

Excerpt from Corrosion Under Oil Films, With Special Reference to the Cause and Prevention of the After-Corrosion of Firearms Generally, corrosion under an oil film has been attributed to acid products of explosion, such as acid nitrocellulose residues, or acids from the primer, or to diffusing acid gases, although other explana tions have been advanced. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Author : Wilbert James Huff
Publisher : Unknown
Page : 26 pages
File Size : 42,9 Mb
Release : 1922
Category : Corrosion and anti-corrosives
ISBN : LCCN:22026656

Get Book

Corrosion Under Oil Films by Wilbert James Huff Pdf

Author : Viswanathan S. Saji,Saviour A. Umoren
Publisher : John Wiley & Sons
Page : 464 pages
File Size : 43,7 Mb
Release : 2020-01-29
Category : Technology & Engineering
ISBN : 9783527822126

Get Book

Corrosion Inhibitors in the Oil and Gas Industry by Viswanathan S. Saji,Saviour A. Umoren Pdf

Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.

Author : Alec Groysman
Publisher : Springer
Page : 356 pages
File Size : 43,5 Mb
Release : 2016-10-24
Category : Technology & Engineering
ISBN : 9783319452562

Get Book

Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry by Alec Groysman Pdf

This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion fatigue occurring at refinery units. At last, fouling, corrosion and cleaning are discussed in this book.

Author : Linda Garverick
Publisher : ASM International
Page : 524 pages
File Size : 43,7 Mb
Release : 1994-01-01
Category : Technology & Engineering
ISBN : 0871705052

Get Book

Corrosion in the Petrochemical Industry by Linda Garverick Pdf

A comprehensive collection of peer-reviewed data and information on corrosion in the petroleum, petrochemical, and chemical processing industries from a number of ASM International publications. The principal sources are Corrosion, Volume 13, and Failure Analysis and Prevention, Volume 11 of ASM H

Author : Anonim
Publisher : ASTM International
Page : 332 pages
File Size : 43,9 Mb
Release : 1972
Category : Aluminum alloys
ISBN : 0803101104

Get Book

Localized Corrosion--cause of Metal Failure by Anonim Pdf

Author : Anonim
Publisher : Unknown
Page : 60 pages
File Size : 42,7 Mb
Release : 1953
Category : Corrosion and anti-corrosives
ISBN : UOM:39015095048370

Get Book

Corrosion by Anonim Pdf

Author : Suresh Aluvihara
Publisher : GRIN Verlag
Page : 57 pages
File Size : 40,9 Mb
Release : 2018-06-22
Category : Technology & Engineering
ISBN : 9783668733688

Get Book

A Study of the Effects of Crude Oil on the Rate of Corrosion and the Properties of Selected Ferrous Metals by Suresh Aluvihara Pdf

Bachelor Thesis from the year 2017 in the subject Engineering - Metal Engineering / Metal Processing / Metal Structure, grade: -, , language: English, abstract: In the industry of crude oil refining, can be found wide range of applications of ferrous metals such as in the storage and transportation. The corrosion is a kind of major problem faced in the usage of such ferrous metals. The formation of the oxides, sulfides, hydroxides or the compound related to the carboxylic group on the surface of metal due to the chemical reaction between metals and surrounding are known as the corrosion which is highly depended on the sulfur content, salt content, mercaptans content and the acidity of crude oil as well as the chemical composition of ferrous metals. In the current research it was expected to investigate the effect of Murban and Das blend crude oils on the rate of corrosion of seven different ferrous metals which are used in the crude oil refining industry and also expected to investigate the change in hardness of each metal due to the corrosion. The sulfur content, acidity and salt content of each crude oil were determined. A series of similar pieces of seven different types of ferrous metals were immersed in each crude oil separately for 15, 30 and 45 days. Their rate of corrosion was determined by using their relative weight loss after these time periods. The corroded metal surfaces were observed under the microscope. The hardness of each metal piece was tested before the immersion in crude oil and after the corrosion with the aid of Vicker’s hardness tester. It was found that blend crude oil contains higher sulfur content and acidity than Murban crude oil. Carbon steel metal pieces show the highest corrosion rates whereas the stainless steel metal pieces show the least corrosion rates in both crude oils. The mild steel piece and the Monel piece show relatively intermediate corrosion rates compared to the other types of ferrous metal pieces in both crude oils. It can be observed that there is a slight decrease in hardness of all the ferrous metal pieces due to corrosion. The corrosion rates of ferrous metals are varied with the properties of crude oils such as sulfur content, acidity and the amount of mercaptans present. Finally the relevant metallic concentration of each crude oil sample was tested using atomic absorption spectroscopy (AAS). According to those results significant Fe and Cu concentrations were observed from some of crude oil samples.

Author : United States. National Bureau of Standards
Publisher : Unknown
Page : 260 pages
File Size : 49,6 Mb
Release : 1978
Category : Corrosion and anti-corrosives
ISBN : UIUC:30112101556055

Get Book

Economic Effects of Metallic Corrosion in the United States by United States. National Bureau of Standards Pdf

Author : Anonim
Publisher : ASM International
Page : 426 pages
File Size : 43,6 Mb
Release : 2015-12-01
Category : Petroleum chemicals industry
ISBN : 9781627080941

Get Book

Corrosion in the Petrochemical Industry, Second Edition by Anonim Pdf

Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.

Author : United States. National Aeronautics and Space Administration Scientific and Technical Information Division
Publisher : Unknown
Page : 444 pages
File Size : 53,6 Mb
Release : 1966
Category : Corrosion and anti-corrosives
ISBN : STANFORD:36105024714813

Get Book

Lubrication, Corrosion and Wear by United States. National Aeronautics and Space Administration Scientific and Technical Information Division Pdf

Author : J Harston
Publisher : Elsevier
Page : 128 pages
File Size : 48,6 Mb
Release : 2014-01-23
Category : Technology & Engineering
ISBN : 9781845693244

Get Book

Corrosion in Refineries by J Harston Pdf

Corrosion in ageing refinery plant presents a serious safety hazard. This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and controlled. The book reviews factors affecting corrosion such as carburisation and metal dusting as well as corrosion in steel and other materials used in refinery technology. It considers corrosion in a range of refinery equipment such as storage tanks, HF alkylation units, sour water strippers and insulated units. Other chapters discuss ways of testing for corrosion and cracking in refineries together with integrity and life cycle assessment techniques. There is also coverage of ways of trouble-shooting corrosion problems and preventative measures such as coating systems. With its distinguished editor and team of contributors, Corrosion in refineries is a valuable reference for all those concerned with building and maintaining refineries in the petrochemical industry. Summarises key research into corrosion processes in refinery equipment Discusses ways of testing for corrosion and cracking in refineries

Author : Richard Baker Belser
Publisher : Unknown
Page : 80 pages
File Size : 50,6 Mb
Release : 1960
Category : Corrosion and anti-corrosives
ISBN : CORNELL:31924004668160

Get Book

Thin Metal Films as Corrosion Indicators by Richard Baker Belser Pdf

Author : L Fedrizzi,H Terryn,A Simoes
Publisher : Elsevier
Page : 249 pages
File Size : 50,5 Mb
Release : 2014-01-23
Category : Technology & Engineering
ISBN : 9781845693688

Get Book

Innovative Pre-Treatment Techniques to Prevent Corrosion of Metallic Surfaces by L Fedrizzi,H Terryn,A Simoes Pdf

There has long been a need for effective pre-treatment techniques to prevent corrosion of metallic surfaces. This important volume discusses key research on the development of pre-treatment techniques for a range of metals. Chapters review various coatings and preparation methods for aluminium and aluminium alloys such as silane films, sol-gel coatings and magnesium-rich primers. Further chapters discuss the pre-treatment methods for steel, copper and magnesium alloys. The book also assesses methods for monitoring the effectiveness of pre-treatments, covering dissolution-precipitation mechanisms and their electrochemical behaviour. Innovative pre-treatment techniques to prevent corrosion of metallic surfaces is a valuable reference for all those concerned with corrosion problems and the use of pre-treatment techniques in the coatings industry. Reviews coating and preparation methods for alluminium alloys An authoritative overview of pre-treatments for steel, copper, zinc and magnesium alloys

Author : United States. National Bureau of Standards
Publisher : Unknown
Page : 340 pages
File Size : 53,5 Mb
Release : 1978
Category : Corrosion and anti-corrosives
ISBN : STANFORD:36105131568961

Get Book

Economic Effects of Metallic Corrosion in the United States by United States. National Bureau of Standards Pdf