Creep In Metallic Materials

Author : Josef Čadek
Publisher : Elsevier Publishing Company
Page : 380 pages
File Size : 55,5 Mb
Release : 1988
Category : Technology & Engineering
ISBN : UOM:39015034836596

Get Book

Creep in Metallic Materials by Josef Čadek Pdf

Hardbound. The phenomenon of time-dependent plastic deformation of metallic materials under constant load at high temperatures has been documented for at least two centuries and is now termed high temperature creep. A better understanding of creep behaviour of metals and alloys is highly desirable, not only for predictions and thus more efficient exploitation of contemporary creep-resistant metallic materials, but also such an understanding may be of great help in designing new materials and their thermal and mechanical treatment.The aim of this monograph is to provide a comprehensive review of the current status of knowledge of mechanisms of high temperature creep, creep damage and creep fracture in metals and alloys. In the introductory chapters 1-6, the time dependence of creep strain, mechanical equation of state, dislocation motion in creep and dependence of creep rate on temperature, stress and some structure parameters are treated in a traditio

Author : Michael E. Kassner,Maria-Teresa Perez-Prado
Publisher : Elsevier
Page : 288 pages
File Size : 42,7 Mb
Release : 2004-04-06
Category : Technology & Engineering
ISBN : 0080532144

Get Book

Fundamentals of Creep in Metals and Alloys by Michael E. Kassner,Maria-Teresa Perez-Prado Pdf

* Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world’s leading investigators. · Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials · Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures · Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Author : Michael E. Kassner
Publisher : Elsevier
Page : 295 pages
File Size : 40,8 Mb
Release : 2008-11-27
Category : Technology & Engineering
ISBN : 9780080914992

Get Book

Fundamentals of Creep in Metals and Alloys by Michael E. Kassner Pdf

Creep refers to the slow, permanent deformation of materials under external loads, or stresses. It explains the creep strength or resistance to this extension. This book is for experts in the field of strength of metals, alloys and ceramics. It explains creep behavior at the atomic or “dislocation defect level. This book has many illustrations and many references. The figure formats are uniform and consistently labeled for increased readability. This book is the second edition that updates and improves the earlier edition. Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials Transmission electron micrographs provide direct insight into the basic microstructure of metals deforming at high temperatures Extensive literature review of about 1000 references provides an excellent overview of the field

Author : Rolf Sandström
Publisher : Springer Nature
Page : 317 pages
File Size : 54,6 Mb
Release : 2024-02-10
Category : Technology & Engineering
ISBN : 9783031495076

Get Book

Basic Modeling and Theory of Creep of Metallic Materials by Rolf Sandström Pdf

This open access book features an in-depth exploration of the intricate creep behavior exhibited by metallic materials, with a specific focus on elucidating the underlying mechanical properties governing their response at elevated temperatures, particularly in the context of polycrystalline alloys. Traditional approaches to characterizing mechanical properties have historically relied upon empirical models replete with numerous adjustable parameters, painstakingly tuned to match experimental data. While these methods offer practical simplicity, they often yield outcomes that defy meaningful extrapolation and application to novel systems, invariably necessitating the recalibration of parameters afresh. In stark contrast, this book compiles a compendium of models sourced from the scientific literature, meticulously crafted through ab initio methodologies rooted in fundamental physical principles. Notably, these models stand apart by their conspicuous absence of adjustable parameters. This pioneering effort is envisioned as a groundbreaking initiative, marking the first of its kind in the field. The resulting models, bereft of arbitrary tuning, offer a level of predictability hitherto unattained. Notably, they provide a secure foundation for ascertaining operational mechanisms, contributing significantly to enhancing our understanding of material behavior in high-temperature environments. This open access book is a valuable resource for researchers and seasoned students engaged in the study of creep phenomena in metallic materials. Readers will find a comprehensive exposition of these novel, parameter-free models, facilitating a deeper comprehension of the intricate mechanics governing material deformation at elevated temperatures.

Author : Andrew Rusinko,Konstantin Rusinko
Publisher : Springer Science & Business Media
Page : 442 pages
File Size : 46,9 Mb
Release : 2011-07-24
Category : Science
ISBN : 9783642212130

Get Book

Plasticity and Creep of Metals by Andrew Rusinko,Konstantin Rusinko Pdf

This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of the classical theories. In its main part, the book presents the synthetic theory of irreversible deformations, which is based on the mathematical Sanders flow plasticity theory and the physical theory, the Budiansky concept of slip. The main peculiarity of the synthetic theory is that the formulae for both plastic and creep deformation, as well their interrelations, can be derived from the single constitutive equation. Furthermore, the synthetic theory, as physical one, can take into account the real processes that take place in solids at irreversible deformation. This widens considerably the potential of the synthetic theory. In the framework of the synthetic theory such problems as creep delay, the Hazen-Kelly effect, the deformation at the break of the load trajectory, the influence of the rate of loading on the stress-strain diagram, creep at the changes of load, creep at unloading and reversed creep, have been analytically described. In the last chapter, the book shows the solution of some contemporary problems of plasticity and creep: Creep deformation at cyclic abrupt changes of temperature, The influence of irradiation on the plastic and creep deformation, Peculiarities of deformation at the phase transformation of some metals.

Author : Stefano Spigarelli,Elisabetta Gariboldi
Publisher : MDPI
Page : 212 pages
File Size : 41,5 Mb
Release : 2019-12-12
Category : Technology & Engineering
ISBN : 9783039218783

Get Book

Creep and High Temperature Deformation of Metals and Alloys by Stefano Spigarelli,Elisabetta Gariboldi Pdf

By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.

Author : Flake C. Campbell
Publisher : ASM International
Page : 671 pages
File Size : 45,5 Mb
Release : 2008-01-01
Category : Technology & Engineering
ISBN : 9781615030583

Get Book

Elements of Metallurgy and Engineering Alloys by Flake C. Campbell Pdf

This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.

Author : J. D. Lubahn,Robert P. Felgar
Publisher : Unknown
Page : 636 pages
File Size : 55,7 Mb
Release : 1961
Category : Deformations (Mechanics).
ISBN : UOM:39015003729632

Get Book

Plasticity and Creep of Metals by J. D. Lubahn,Robert P. Felgar Pdf

Author : R. W. Evans,B. Wilshire
Publisher : Routledge
Page : 136 pages
File Size : 44,9 Mb
Release : 1993
Category : Science
ISBN : UOM:39015033108963

Get Book

Introduction to Creep by R. W. Evans,B. Wilshire Pdf

Author : A. M. Lokoshchenko
Publisher : CRC Press
Page : 403 pages
File Size : 49,9 Mb
Release : 2017-12-14
Category : Science
ISBN : 9781351656436

Get Book

Creep and Long-Term Strength of Metals by A. M. Lokoshchenko Pdf

Creep and Creep Rupture of Metals is devoted to the fundamental description of the phenomenon of creep which occurs widely in high-temperature deformation of metals. Special attention is paid to the analysis of long-term strength, which characterizes the stress at which the metal does not fail after a predetermined time. The author details experimental and theoretical results obtained by Soviet and Russian scientists that are absent in currently available publications and demonstrates analytical methods and approaches to achieve long term strength in Metals.

Author : Frank Garofalo
Publisher : Unknown
Page : 284 pages
File Size : 44,7 Mb
Release : 1965
Category : Technology & Engineering
ISBN : UCAL:B4531011

Get Book

Fundamentals of Creep and Creep-rupture in Metals by Frank Garofalo Pdf

Author : Tomasz Tański,Marek Sroka,Adam Zieliński
Publisher : BoD – Books on Demand
Page : 270 pages
File Size : 42,6 Mb
Release : 2018-01-10
Category : Technology & Engineering
ISBN : 9789535137245

Get Book

Creep by Tomasz Tański,Marek Sroka,Adam Zieliński Pdf

This book contains 12 chapters with original and innovative research studies in the issues related to the broadly defined creep effect, which concerns not only the area of construction materials but also natural phenomena. The emphasis on the discussion of a new trend of experimental creep testing, which binds the classic creep methods to seek the correlation of parameters obtained in tests, deserves particular attention. This book aims to provide the readers, including, but not limited to, students and doctoral students and also the research personnel and engineers involved in the operation of equipment and structural components as well as specialists in high-temperature creep-resisting materials, with a comprehensive review of new trends in the field of creep-exposed materials and their research methodology. The chapters of this book were developed by respected and well-known researchers from different countries.

Author : F R N Nabarro,F. de Villiers
Publisher : CRC Press
Page : 349 pages
File Size : 50,7 Mb
Release : 2018-05-08
Category : Technology & Engineering
ISBN : 9781135477622

Get Book

Physics Of Creep And Creep-Resistant Alloys by F R N Nabarro,F. de Villiers Pdf

Unique in its approach, this introduction to the physics of creep concentrates on the physical principles underlying observed phenomena. As such it provides a resource for graduate students in materials science, metallurgy, mechanical engineering, physics and chemistry as well as researchers in other fields. Following a brief mathematical treatment, the authors introduce creep phenomena together with some empirical laws and observations. The mechanisms of creep and diffusion under varying experimental conditions are subsequently analysed and developed. The second half of the text considers alloying in greater detail as well as exploring the structure and properties of superalloys and stress effects in these materials.

Author : Tomasz Arkadiusz Tański,Marek Sroka,Adam Zieliński,Grzegorz Golański
Publisher : BoD – Books on Demand
Page : 108 pages
File Size : 48,7 Mb
Release : 2020-02-19
Category : Technology & Engineering
ISBN : 9781789843637

Get Book

Creep Characteristics of Engineering Materials by Tomasz Arkadiusz Tański,Marek Sroka,Adam Zieliński,Grzegorz Golański Pdf

This book contains chapters with the results of the research into the creep effect in different materials (ceramics, metallic materials, polymers, organic materials) and presents the method for using the assessment based on creep tests and numerical calculations to determine the actual lifetime. This subject has relevance as a significant development of new materials in which the creep effect is a decisive factor for their durability within the design service life have been observed in recent years. Therefore, there is a great demand for knowledge of the actual performance of materials during and beyond the design service life. The book aims to provide readers, including but not limited to MSc and PhD students as well as research personnel and engineers involved in operation of power equipment, with the comprehensive information on changes in the performance of creep-resistant materials during service.

Author : Rajiv S. Mishra,Amiya K. Mukherjee,K. Linga Murty
Publisher : Minerals, Metals, & Materials Society
Page : 536 pages
File Size : 51,9 Mb
Release : 1999
Category : Science
ISBN : STANFORD:36105028639149

Get Book

Creep Behavior of Advanced Materials for the 21st Century by Rajiv S. Mishra,Amiya K. Mukherjee,K. Linga Murty Pdf

This volume reviews and updates the creep behavior of advanced materials, including ceramic and metal-matrix composites, laminated materials, nanostructured materials, advanced intermetallics, and advanced dispersion strengthened materials. This collection from the 1999 TMS Annual Meeting & Exhibition also covers the influence of microstructure on various aspects of creep and how this knowledge can be used to design more creep resistant materials.