Design Of Steel Concrete Composite Structures Using High Strength Materials

Author : J.Y. Richard Liew,Ming-Xiang Xiong,Bing-Lin Lai
Publisher : Woodhead Publishing
Page : 256 pages
File Size : 42,6 Mb
Release : 2021-08-04
Category : Architecture
ISBN : 9780128234365

Get Book

Design of Steel-Concrete Composite Structures Using High-Strength Materials by J.Y. Richard Liew,Ming-Xiang Xiong,Bing-Lin Lai Pdf

High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members Suggests a unified approach to designing columns with normal- and high-strength steel and concrete

Author : Roger P. Johnson
Publisher : John Wiley & Sons
Page : 288 pages
File Size : 51,8 Mb
Release : 2018-08-21
Category : Technology & Engineering
ISBN : 9781119401384

Get Book

Composite Structures of Steel and Concrete by Roger P. Johnson Pdf

This book provides an introduction to the theory and design of composite structures of steel and concrete. Material applicable to both buildings and bridges is included, with more detailed information relating to structures for buildings. Throughout, the design methods are illustrated by calculations in accordance with the Eurocode for composite structures, EN 1994, Part 1-1, ‘General rules and rules for buildings’ and Part 1-2, ‘Structural fire design’, and their cross-references to ENs 1990 to 1993. The methods are stated and explained, so that no reference to Eurocodes is needed. The use of Eurocodes has been required in the UK since 2010 for building and bridge structures that are publicly funded. Their first major revision began in 2015, with the new versions due in the early 2020s. Both authors are involved in the work on Eurocode 4. They explain the expected additions and changes, and their effect in the worked examples for a multi-storey framed structure for a building, including resistance to fire. The book will be of interest to undergraduate and postgraduate students, their lecturers and supervisors, and to practising engineers seeking familiarity with composite structures, the Eurocodes, and their ongoing revision.

Author : R. Narayanan
Publisher : CRC Press
Page : 362 pages
File Size : 55,6 Mb
Release : 1988-12-31
Category : Architecture
ISBN : 9781851661343

Get Book

Steel-Concrete Composite Structures by R. Narayanan Pdf

This is a collection of ten extensive review chapters by different authors.

Author : Sing-Ping Chiew,Yan-Qing Cai
Publisher : CRC Press
Page : 104 pages
File Size : 45,6 Mb
Release : 2018-04-17
Category : Technology & Engineering
ISBN : 9781351203944

Get Book

Design of High Strength Steel Reinforced Concrete Columns by Sing-Ping Chiew,Yan-Qing Cai Pdf

This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials – columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volume provides detailed worked examples on use of these high strength materials. This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.

Author : J. Y. Richard Liew
Publisher : Research Publishing Service
Page : 31 pages
File Size : 48,5 Mb
Release : 2012
Category : Composite construction
ISBN : 9789810726133

Get Book

Advances in Steel Concrete Composite Structures by J. Y. Richard Liew Pdf

Author : Ming-Shan Zhao,Sing-Ping Chiew,Guan-Feng Chua,Miao Ding,Yi Yang,Zhengxia Cong
Publisher : CRC Press
Page : 144 pages
File Size : 50,5 Mb
Release : 2024-08-05
Category : Technology & Engineering
ISBN : 9781040099858

Get Book

Design of High-performance Pre-engineered Steel Concrete Composite Beams for Sustainable Construction by Ming-Shan Zhao,Sing-Ping Chiew,Guan-Feng Chua,Miao Ding,Yi Yang,Zhengxia Cong Pdf

This accessible and practical shortform book details the properties and advantages of high-performance pre-engineered steel-concrete composite beams (HPCBs) for improving the sustainability of construction techniques. It also explains the analysis methods for testing HPCB systems. The authors describe a new HPCB system that has been developed to reduce the input of raw materials and embodied CO2 commonly associated with heavily loaded and long-spanned industrial buildings (which predominately comprise reinforced concrete) and improve the sustainability of the construction process. They provide several resources throughout to facilitate adoption by professionals. Design equations derived from Eurocode 4 approach for ultimate limit state and serviceability limit state and worked examples are included throughout. The authors discuss the feasibility for both materials and the full-scale beams and CO2 reduction methods, including use of recycled concrete aggregate, ground granulated blast-furnace and silica fume to replace natural coarse aggregates and Ordinary Portland Cement. Guidance for testing HPCBs—including setup, test procedure and data collection and interpretation—is also given. The authors also elaborate on recommendations for finite element analysis for HPCBs. Design examples are appended to illustrate typical current practice using a 12 × 12 m grid floor with live load of 15 kPa. Various considerations for different parameters such as fire resistance are discussed. Finally, the authors present a case study of a recently completed industrial building in Singapore to quantify the benefits of using HPCBs over reinforced concrete and conventional composite construction. Structural engineering professionals, whose work relates to long-span and heavy-loading industrial or commercial buildings, will benefit from the detailed guidance and focus on practical applications provided throughout this book. Post-graduate students of advanced steel and composite structures will also benefit from these descriptions.

Author : Lloyd C. P. Yam
Publisher : Unknown
Page : 192 pages
File Size : 52,5 Mb
Release : 1981
Category : Composite construction
ISBN : UCAL:B4177008

Get Book

Design of Composite Steel-concrete Structures by Lloyd C. P. Yam Pdf

Author : Bahram M. Shahrooz
Publisher : Transportation Research Board
Page : 83 pages
File Size : 44,9 Mb
Release : 2011
Category : Science
ISBN : 9780309155410

Get Book

Design of Concrete Structures Using High-strength Steel Reinforcement by Bahram M. Shahrooz Pdf

TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaluates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online.

Author : Sing-Ping Chiew,Yan-Qing Cai
Publisher : CRC Press
Page : 96 pages
File Size : 50,7 Mb
Release : 2018-04-17
Category : Technology & Engineering
ISBN : 9780429890727

Get Book

Design Examples for High Strength Steel Reinforced Concrete Columns by Sing-Ping Chiew,Yan-Qing Cai Pdf

This book is the companion volume to Design of High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. This book provides a large number of worked examples for the design of high strength steel reinforced concrete (SRC) columns. It is based on the Eurocode 4 approach, but goes beyond this to give much needed guidance on the narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete. Special considerations are given to resistance calculations that maximize the full strength of the materials, with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. These examples build on the design principles set out in the companion volume, allowing the readers to practice and understand the EC4 methodology easily. Structural engineers and designers who are familiar with basic EC4 design should find these design examples particularly helpful, whilst engineering undergraduate and graduate students who are studying composite steel concrete design and construction should easily gain further understanding from working through the worked examples which are set out in a step-by-step clearly fashion.

Author : Qing Quan Liang
Publisher : CRC Press
Page : 458 pages
File Size : 51,5 Mb
Release : 2018-10-08
Category : Technology & Engineering
ISBN : 9781482266535

Get Book

Analysis and Design of Steel and Composite Structures by Qing Quan Liang Pdf

Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

Author : Markus Knobloch,Ulrike Kuhlmann,Wolfgang Kurz,Markus Schafer
Publisher : John Wiley & Sons
Page : 754 pages
File Size : 45,9 Mb
Release : 2024-09-03
Category : Technology & Engineering
ISBN : 9783433033784

Get Book

Composite Construction in Steel and Concrete 9 by Markus Knobloch,Ulrike Kuhlmann,Wolfgang Kurz,Markus Schafer Pdf

Composite Construction in Steel and Concrete IX The highly successful International Conference series on Composite Construction in Steel and Concrete is a major forum for researchers, practitioners, and engineers to share and discuss their research, practical experience and innovations related to composite constructions in steel and concrete. Composite Construction is a key consideration in the design of buildings and infrastructure. Significant advances in research and development have increased the knowledge of the structural performance of composite structures. Some areas are becoming well understood and implemented in the design practice, codes and standards worldwide, while others like, e.g., application of high-performance materials or dismountable and reusable composite members need further studies; trends that are reflected by the conference papers. The 62 contributions contained in this book cover a wide variety of topics, including composite beams, composite columns, composite decks, joints, shear connections, fire behavior, seismic behavior, fatigue and fracture, codification, composite bridges, innovative hybrid structures, numerical investigations and practical applications. The Papers are peer-reviewed by the Scientific Board and may be adapted based on the outcome of the discussions during the conference. This book therefore summarizes the state-of-the-art in composite construction worldwide, as presented at the 9th International Conference on Composite Construction in Steel and Concrete hosted by the Ruhr-Universität Bochum, University of Stuttgart, RPTU Kaiserslautern-Landau and University of Luxembourg, representing the work of authors from 18 countries.

Author : Jerome F. Hajjar
Publisher : Unknown
Page : 0 pages
File Size : 47,8 Mb
Release : 2002
Category : Building, Iron and steel
ISBN : 0784406162

Get Book

Composite Construction in Steel and Concrete IV by Jerome F. Hajjar Pdf

This collection contains 85 papers presented at the Composite Construction in Steel and Concrete IV Conference, held in Banff, Alberta, Canada, May 28-June 2, 2000.

Author : Ehab Ellobody
Publisher : Butterworth-Heinemann
Page : 682 pages
File Size : 40,6 Mb
Release : 2014-05-30
Category : Technology & Engineering
ISBN : 9780124173033

Get Book

Finite Element Analysis and Design of Steel and Steel–Concrete Composite Bridges by Ehab Ellobody Pdf

In recent years, bridge engineers and researchers are increasingly turning to the finite element method for the design of Steel and Steel-Concrete Composite Bridges. However, the complexity of the method has made the transition slow. Based on twenty years of experience, Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges provides structural engineers and researchers with detailed modeling techniques for creating robust design models. The book’s seven chapters begin with an overview of the various forms of modern steel and steel–concrete composite bridges as well as current design codes. This is followed by self-contained chapters concerning: nonlinear material behavior of the bridge components, applied loads and stability of steel and steel–concrete composite bridges, and design of steel and steel–concrete composite bridge components. Constitutive models for construction materials including material non-linearity and geometric non-linearity The mechanical approach including problem setup, strain energy, external energy and potential energy), mathematics behind the method Commonly available finite elements codes for the design of steel bridges Explains how the design information from Finite Element Analysis is incorporated into Building information models to obtain quantity information, cost analysis

Author : R. P. Johnson
Publisher : John Wiley & Sons
Page : 251 pages
File Size : 53,7 Mb
Release : 2008-04-15
Category : Technology & Engineering
ISBN : 9781405168397

Get Book

Composite Structures of Steel and Concrete by R. P. Johnson Pdf

This book sets out the basic principles of composite constructionwith reference to beams, slabs, columns and frames, and theirapplications to building structures. It deals with the problemslikely to arise in the design of composite members in buildings,and relates basic theory to the design approach of Eurocodes 2, 3and 4. The new edition is based for the first time on the finalisedEurocode for steel/concrete composite structures.

Author : Roberto T. Leon
Publisher : Amer Society of Civil Engineers
Page : 790 pages
File Size : 46,9 Mb
Release : 2011
Category : Technology & Engineering
ISBN : 0784411425

Get Book

Composite Construction in Steel and Concrete VI by Roberto T. Leon Pdf

Proceedings of the sixth International Conference on Composite Construction in Steel and Concrete held at the Devil s Thumb Ranch in Tabernash, Colorado, July 20 24, 2008. Sponsored by Engineering Conferences International; the Structural Engineering Institute of ASCE. This collection contains the 63 technical papers representing the state-of-the-art in composite construction worldwide. Topics include: composite bridges, composite slabs, shear connectors, composite columns, innovative composite structural systems, fire and seismic resistance of composite structural systems and practical applications. These papers will be valuable to structural engineers and allied professionals engaged in construction with steel and concrete composites.