Embedded Systems An Introduction Using The Renesas Rx62n Microcontroller

Author : James M. Conrad,Alexander G. Dean
Publisher : Micrium
Page : 524 pages
File Size : 43,7 Mb
Release : 2011-09-01
Category : Computer software
ISBN : 1935772996

Get Book

Embedded Systems, an Introduction Using the Renesas Rx62N Microcontroller by James M. Conrad,Alexander G. Dean Pdf

Billions of microcontrollers are sold each year to create embedded systems for a wide range of products. An embedded system is an application-specific computer system which is built into a larger system or device. Using a computer system offers many benefits such as sophisticated control, precise timing, low unit cost, low development cost, high flexibility, small size, and low weight. These basic characteristics can be used to improve the overall system or device in various ways: Improved performance More functions and features Reduced cost Increased dependabilityThis book uses the Renesas RX62N family of processors to demonstrate concepts with hands-on examples complete with source code targeting the YRDKRX62N evaluation board. The 32-bit RX processor core provides remarkable instruction throughput, with high clock rates and hardware support for floating-point and digital-signal processing instructions. The core is also quite agile, responding to fast interrupts in 5 clock cycles. These processors offer a wide range of sophisticated peripherals to simplify interfacing with and controlling external devices.

Author : Alexander G. Dean,James M. Conrad
Publisher : Unknown
Page : 390 pages
File Size : 48,6 Mb
Release : 2012-03-01
Category : Computers
ISBN : 1935772988

Get Book

Creating Fast, Responsive and Energy-Efficient Embedded Systems Using the Renesas Rl78 Microcontroller by Alexander G. Dean,James M. Conrad Pdf

Embedded microcontrollers enable products with sophisticated control, precise timing, low unit cost, low development cost, and high design flexibility. This book shows how to design and optimize embedded systems using the energy-efficient RL78 family of microcontrollers from Renesas Electronics Inc. The book is suitable for practicing engineers and both undergraduate and graduate classes on embedded systems. The first section of the book provides an introduction to developing embedded systems efficiently. - Basic microcontroller concepts - Processor core, instruction set architecture and interrupt system - Peripherals for digital and analog interfacing, serial communications, timing control, system robustness and acceleration, clock system control and low-power standby modes - Software development concepts including software engineering, development tool-chain, and compiler concepts The second section dives into optimizing embedded systems for three different goals. - Program speed depends on designing an efficient program and then helping the compiler generate fast object code. Execution time profiling finds the slow parts of the program quickly and guides speed optimization efforts. Examining object code helps determine if the compiler is working well enough. - Program responsiveness to events depends on the task scheduling approach and the use of preemption and prioritization. Real-time system analysis enables the calculation of response times and schedulability. - System energy efficiency depends on balancing a system's static and dynamic power consumption. A good design will trade off supply voltage, operating frequency, standby and shutdown modes to meet energy or power goals.

Author : Shenouda Dawoud,R. Peplow
Publisher : CRC Press
Page : 570 pages
File Size : 41,7 Mb
Release : 2022-09-01
Category : Technology & Engineering
ISBN : 9781000793123

Get Book

Digital System Design - Use of Microcontroller by Shenouda Dawoud,R. Peplow Pdf

Embedded systems are today, widely deployed in just about every piece of machinery from toasters to spacecraft. Embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but more importantly to satisfy numerous other constraints. To achieve the current goals of design, the designer must be aware with such design constraints and more importantly, the factors that have a direct effect on them.One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand; single-purpose, general-purpose or application specific. Microcontrollers are one member of the family of the application specific processors.The book concentrates on the use of microcontroller as the embedded system?s processor, and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontroller.The book is ideal for undergraduate students and also the engineers that are working in the field of digital system design.Contents• Preface;• Process design metrics;• A systems approach to digital system design;• Introduction to microcontrollers and microprocessors;• Instructions and Instruction sets;• Machine language and assembly language;• System memory; Timers, counters and watchdog timer;• Interfacing to local devices / peripherals;• Analogue data and the analogue I/O subsystem;• Multiprocessor communications;• Serial Communications and Network-based interfaces.

Author : David Russell
Publisher : Morgan & Claypool Publishers
Page : 255 pages
File Size : 40,9 Mb
Release : 2010
Category : Technology & Engineering
ISBN : 9781608454983

Get Book

Introduction to Embedded Systems by David Russell Pdf

Many electrical and computer engineering projects involve some kind of embedded system in which a microcontroller sits at the center as the primary source of control. The recently-developed Arduino development platform includes an inexpensive hardware development board hosting an eight-bit ATMEL ATmega-family processor and a Java-based software-development environment. These features allow an embedded systems beginner the ability to focus their attention on learning how to write embedded software instead of wasting time overcoming the engineering CAD tools learning curve. The goal of this text is to introduce fundamental methods for creating embedded software in general, with a focus on ANSI C. The Arduino development platform provides a great means for accomplishing this task. As such, this work presents embedded software development using 100% ANSI C for the Arduino's ATmega328P processor. We deviate from using the Arduino-specific Wiring libraries in an attempt to provide the most general embedded methods. In this way, the reader will acquire essential knowledge necessary for work on future projects involving other processors. Particular attention is paid to the notorious issue of using C pointers in order to gain direct access to microprocessor registers, which ultimately allow control over all peripheral interfacing. Table of Contents: Introduction / ANSI C / Introduction to Arduino / Embedded Debugging / ATmega328P Architecture / General-Purpose Input/Output / Timer Ports / Analog Input Ports / Interrupt Processing / Serial Communications / Assembly Language / Non-volatile Memory

Author : Manuel Jiménez,Rogelio Palomera,Isidoro Couvertier
Publisher : Springer
Page : 648 pages
File Size : 52,5 Mb
Release : 2017-04-30
Category : Technology & Engineering
ISBN : 1493944282

Get Book

Introduction to Embedded Systems by Manuel Jiménez,Rogelio Palomera,Isidoro Couvertier Pdf

This textbook serves as an introduction to the subject of embedded systems design, using microcontrollers as core components. It develops concepts from the ground up, covering the development of embedded systems technology, architectural and organizational aspects of controllers and systems, processor models, and peripheral devices. Since microprocessor-based embedded systems tightly blend hardware and software components in a single application, the book also introduces the subjects of data representation formats, data operations, and programming styles. The practical component of the book is tailored around the architecture of a widely used Texas Instrument’s microcontroller, the MSP430 and a companion web site offers for download an experimenter’s kit and lab manual, along with Powerpoint slides and solutions for instructors.

Author : Douglas Summerville
Publisher : Springer Nature
Page : 125 pages
File Size : 40,9 Mb
Release : 2022-05-31
Category : Technology & Engineering
ISBN : 9783031798030

Get Book

Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller II by Douglas Summerville Pdf

The vast majority of computers in use today are encapsulated within other systems. In contrast to general-purpose computers that run an endless selection of software, these embedded computers are often programmed for a very specific, low-level and often mundane purpose. Low-end microcontrollers, costing as little as one dollar, are often employed by engineers in designs that utilize only a small fraction of the processing capability of the device because it is either more cost-effective than selecting an application-specific part or because programmability offers custom functionality not otherwise available. Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller is a two-part book intended to provide an introduction to hardware and software interfacing for engineers. Building from a comprehensive introduction of fundamental computing concepts, the book suitable for a first course in computer organization for electrical or computer engineering students with a minimal background in digital logic and programming. In addition, this book can be valuable as a reference for engineers new to the Freescale HCS08 family of microcontrollers. The HCS08 processor architecture used in the book is relatively simple to learn, powerful enough to apply towards a wide-range of interfacing tasks, and accommodates breadboard prototyping in a laboratory using freely available and low-cost tools. In Part II: Digital and Analog Hardware Interfacing, hardware and software interfacing concepts are introduced. The emphasis of this work is on good hardware and software engineering design principles. Device drivers are developed illustrating the use of general-purpose and special-purpose digital I/O interfaces, analog interfaces, serial interfaces and real-time I/O processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part. Table of Contents: Introduction to the MC9S08QG4/8 Hardware / Analog Input / Serial Communication / Real-Time I/O Processing

Author : Dawoud Shenouda Dawoud,R. Peplow
Publisher : River Publishers
Page : 571 pages
File Size : 51,5 Mb
Release : 2010-04-10
Category : Technology & Engineering
ISBN : 9788792329400

Get Book

Digital System Design by Dawoud Shenouda Dawoud,R. Peplow Pdf

Today, embedded systems are widely deployed in just about every piece of machinery from toasters to spacecrafts, and embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but, more importantly, to satisfy numerous other constraints. To achieve these current goals, the designer must be aware of such design constraints and, more importantly, the factors that have a direct effect on them. One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand: single-purpose, general-purpose, or application specific. Microcontrollers are one member of the family of the application specific processors. Digital System Design concentrates on the use of a microcontroller as the embedded system's processor and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontrollers and is ideal for undergraduate students and engineers that are working in the field of digital system design.

Author : Phillip A. Laplante
Publisher : Wiley-IEEE Press
Page : 392 pages
File Size : 51,8 Mb
Release : 1997
Category : Computers
ISBN : UOM:39015041050074

Get Book

Real-Time Systems Design and Analysis by Phillip A. Laplante Pdf

"IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Author : Morton
Publisher : Pearson Education India
Page : 706 pages
File Size : 52,5 Mb
Release : 2001-09
Category : Electronic
ISBN : 8131713334

Get Book

Embedded Microcontrollers by Morton Pdf

This practical text on designing real-time embedded systems using 8- and 16-bit microcontrollers covers both assembly and C programming and real-time kernels. It provides a comprehensive look at embedded microcontrollers-specialized devices used for a variety of applications and which include a memory, a microprocessor, and an I/O interface. Embedded Microcontrollers is one of the first books based on the Motorola MC68HC12. It is for use in any microcontroller course covering embedded systems, or for anyone who wants to design small to medium-sized embedded systems.

Author : Robert Oshana
Publisher : Newnes
Page : 1201 pages
File Size : 46,9 Mb
Release : 2013-04-01
Category : Computers
ISBN : 9780124159419

Get Book

Software Engineering for Embedded Systems by Robert Oshana Pdf

This Expert Guide gives you the techniques and technologies in software engineering to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when using software engineering methods to develop your embedded systems. With this book you will learn: The principles of good architecture for an embedded system Design practices to help make your embedded project successful Details on principles that are often a part of embedded systems, including digital signal processing, safety-critical principles, and development processes Techniques for setting up a performance engineering strategy for your embedded system software How to develop user interfaces for embedded systems Strategies for testing and deploying your embedded system, and ensuring quality development processes Practical techniques for optimizing embedded software for performance, memory, and power Advanced guidelines for developing multicore software for embedded systems How to develop embedded software for networking, storage, and automotive segments How to manage the embedded development process Includes contributions from: Frank Schirrmeister, Shelly Gretlein, Bruce Douglass, Erich Styger, Gary Stringham, Jean Labrosse, Jim Trudeau, Mike Brogioli, Mark Pitchford, Catalin Dan Udma, Markus Levy, Pete Wilson, Whit Waldo, Inga Harris, Xinxin Yang, Srinivasa Addepalli, Andrew McKay, Mark Kraeling and Robert Oshana. Road map of key problems/issues and references to their solution in the text Review of core methods in the context of how to apply them Examples demonstrating timeless implementation details Short and to- the- point case studies show how key ideas can be implemented, the rationale for choices made, and design guidelines and trade-offs

Author : Dogan Ibrahim
Publisher : Newnes
Page : 491 pages
File Size : 44,6 Mb
Release : 2013-08-22
Category : Technology & Engineering
ISBN : 9780080981994

Get Book

Designing Embedded Systems with 32-Bit PIC Microcontrollers and MikroC by Dogan Ibrahim Pdf

The new generation of 32-bit PIC microcontrollers can be used to solve the increasingly complex embedded system design challenges faced by engineers today. This book teaches the basics of 32-bit C programming, including an introduction to the PIC 32-bit C compiler. It includes a full description of the architecture of 32-bit PICs and their applications, along with coverage of the relevant development and debugging tools. Through a series of fully realized example projects, Dogan Ibrahim demonstrates how engineers can harness the power of this new technology to optimize their embedded designs. With this book you will learn: The advantages of 32-bit PICs The basics of 32-bit PIC programming The detail of the architecture of 32-bit PICs How to interpret the Microchip data sheets and draw out their key points How to use the built-in peripheral interface devices, including SD cards, CAN and USB interfacing How to use 32-bit debugging tools such as the ICD3 in-circuit debugger, mikroCD in-circuit debugger, and Real Ice emulator Helps engineers to get up and running quickly with full coverage of architecture, programming and development tools Logical, application-oriented structure, progressing through a project development cycle from basic operation to real-world applications Includes practical working examples with block diagrams, circuit diagrams, flowcharts, full software listings an in-depth description of each operation

Author : Muhammad Ali Mazidi,Sarmad Naimi,Sepehr Naimi
Publisher : Unknown
Page : 752 pages
File Size : 45,5 Mb
Release : 2013-11-01
Category : Assembly languages (Electronic computers)
ISBN : 1292042567

Get Book

AVR Microcontroller and Embedded Systems: Pearson New International Edition by Muhammad Ali Mazidi,Sarmad Naimi,Sepehr Naimi Pdf

For courses in Embedded System Design, Microcontroller's Software and Hardware, Microprocessor Interfacing, Microprocessor Assembly Language Programming, Peripheral Interfacing, Senior Project Design, Embedded System programming with C. The AVR Microcontroller and Embedded Systems: Using Assembly and C features a step-by-step approach in covering both Assembly and C language programming of the AVR family of Microcontrollers. It offers a systematic approach in programming and interfacing of the AVR with LCD, keyboard, ADC, DAC, Sensors, Serial Ports, Timers, DC and Stepper Motors, Opto-isolators, and RTC. Both Assembly and C languages are used in all the peripherals programming. In the first 6 chapters, Assembly language is used to cover the AVR architecture and starting with chapter 7, both Assembly and C languages are used to show the peripherals programming and interfacing.

Author : Tim Wilmshurst
Publisher : Unknown
Page : 556 pages
File Size : 54,8 Mb
Release : 2007
Category : Computers
ISBN : 0750667559

Get Book

Designing Embedded Systems with PIC Microcontrollers by Tim Wilmshurst Pdf

"Gain the knowledge and skills required for developing today's embedded systems through use of the PIC microcontroller ; Explore in detail the 16F84A, 16F873A and 18F242 microcontrollers as examples of the wider PIC family ; Learn how to program in Assember and C ; Work through sample designs and design ideas, including a robot in the form of an autonomous guided vehicle. This book is a hands-on introduction to the principles and practice of embedded system design using the PIC microcontroller. Packed with helpful examples and illustrations, it gives an in-depth treatment of microcontroller design, programming in both assembley language and C, and features advanced topics such as networking and real-time operating systems. ... Includes CD-ROM containing copies of all programs and software tools used in the text and a 'student' version of the C compiler." - back cover.

Author : Muhammad Ali Mazidi,Mazidi
Publisher : Pearson Education India
Page : 564 pages
File Size : 55,5 Mb
Release : 2007-09
Category : 8051
ISBN : 8131710262

Get Book

The 8051 Microcontroller And Embedded Systems Using Assembly And C, 2/E by Muhammad Ali Mazidi,Mazidi Pdf

Author : J. P. Aggarwal
Publisher : Unknown
Page : 205 pages
File Size : 47,5 Mb
Release : 2017
Category : Electronic
ISBN : 1781830347

Get Book

Microcontroller and Embedded Systems by J. P. Aggarwal Pdf