Engineering Computer Graphics Workbook Using Solidworks 2019

Author : Ronald Barr,Davor Juricic,Thomas Krueger,Alejandro Reyes
Publisher : SDC Publications
Page : 248 pages
File Size : 47,9 Mb
Release : 2019-09-03
Category : Computers
ISBN : 9781630572198

Get Book

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2019 by Ronald Barr,Davor Juricic,Thomas Krueger,Alejandro Reyes Pdf

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2019 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SOLIDWORKS 2019. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SOLIDWORKS. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SOLIDWORKS, with little or no instructor input.

Author : Ronald Barr,Davor Juricic,Thomas Krueger
Publisher : SDC Publications
Page : 256 pages
File Size : 40,7 Mb
Release : 2018-04
Category : Computers
ISBN : 9781630571429

Get Book

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2018 by Ronald Barr,Davor Juricic,Thomas Krueger Pdf

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2018 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SOLIDWORKS 2018. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SOLIDWORKS. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SOLIDWORKS, with little or no instructor input.

Author : Ronald Barr
Publisher : SDC Publications
Page : 238 pages
File Size : 47,8 Mb
Release : 2011-06-20
Category : Computers
ISBN : 9781585036288

Get Book

Engineering and Computer Graphics Workbook Using Solidworks 2011 by Ronald Barr Pdf

Engineering & Computer Graphics Workbook Using SolidWorks 2011 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SolidWorks 2011. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SolidWorks. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SolidWorks, with little or no instructor input.

Author : Ronald Barr,Davor Juricic,Thomas Krueger
Publisher : SDC Publications
Page : 256 pages
File Size : 45,6 Mb
Release : 2017-06-12
Category : Computers
ISBN : 9781630570576

Get Book

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 by Ronald Barr,Davor Juricic,Thomas Krueger Pdf

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SOLIDWORKS 2017. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SOLIDWORKS. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SOLIDWORKS, with little or no instructor input.

Author : Ronald Barr,Thomas Krueger,Davor Juricic
Publisher : SDC Publications
Page : 249 pages
File Size : 45,9 Mb
Release : 2014
Category : Computers
ISBN : 9781585038466

Get Book

Engineering & Computer Graphics Workbook Using SolidWorks 2014 by Ronald Barr,Thomas Krueger,Davor Juricic Pdf

Engineering & Computer Graphics Workbook Using SolidWorks 2014 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SolidWorks 2014. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SolidWorks. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SolidWorks, with little or no instructor input.

Author : Theodore A. Aanstoos
Publisher : SDC Publications
Page : 237 pages
File Size : 45,8 Mb
Release : 2012-07-27
Category : Computers
ISBN : 9781585037032

Get Book

Engineering and Computer Graphics Workbook Using SolidWorks 2012 by Theodore A. Aanstoos Pdf

Engineering & Computer Graphics Workbook Using SolidWorks 2012 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SolidWorks 2012. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SolidWorks. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SolidWorks, with little or no instructor input.

Author : James D. Bethune
Publisher : Unknown
Page : 128 pages
File Size : 46,8 Mb
Release : 2019
Category : Computer graphics
ISBN : 0135401623

Get Book

Engineering Design and Graphics with SolidWorks 2019 by James D. Bethune Pdf

Author : Ronald E. Barr,Thomas J. Krueger,D. Juricic
Publisher : SDC Publications
Page : 247 pages
File Size : 42,7 Mb
Release : 2013
Category : Computers
ISBN : 9781585037759

Get Book

Engineering & Computer Graphics Workbook Using Solidworks 2013 by Ronald E. Barr,Thomas J. Krueger,D. Juricic Pdf

Engineering & Computer Graphics Workbook Using SolidWorks 2013 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SolidWorks 2013. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SolidWorks. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SolidWorks, with little or no instructor input.

Author : Ronald Barr
Publisher : SDC Publications
Page : 238 pages
File Size : 47,5 Mb
Release : 2010-05-10
Category : Computers
ISBN : 9781585035656

Get Book

Engineering & Computer Graphics Workbook Using SolidWorks 2010 by Ronald Barr Pdf

Engineering & Computer Graphics Workbook Using SolidWorks 2010 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SolidWorks 2010. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SolidWorks. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SolidWorks, with little or no instructor input.

Author : Randy Shih
Publisher : SDC Publications
Page : 728 pages
File Size : 46,7 Mb
Release : 2020-02
Category : Computers
ISBN : 9781630573188

Get Book

SOLIDWORKS 2020 and Engineering Graphics by Randy Shih Pdf

SOLIDWORKS 2020 and Engineering Graphics: An Integrated Approach combines an introduction to SOLIDWORKS 2020 with a comprehensive coverage of engineering graphics principles. Not only will this unified approach give your course a smoother flow, your students will also save money on their textbooks. What’s more, the exercises in this book cover the performance tasks that are included on the Certified SOLIDWORKS Associate (CSWA) Examination. Reference guides located at the front of the book and in each chapter show where these performance tasks are covered. The primary goal of SOLIDWORKS 2020 and Engineering Graphics: An Integrated Approach is to introduce the aspects of Engineering Graphics with the use of modern Computer Aided Design package – SOLIDWORKS 2020. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of sixteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphics language used in all branches of technical industry. This book does not attempt to cover all of SOLIDWORKS 2020’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Author : David Planchard
Publisher : SDC Publications
Page : 640 pages
File Size : 52,6 Mb
Release : 2018-12-21
Category : Computers
ISBN : 9781630572389

Get Book

SOLIDWORKS 2019 Tutorial by David Planchard Pdf

SOLIDWORKS 2019 Tutorial is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The text provides a step-by-step, project based learning approach. It also contains information and examples on the five categories in the CSWA exam. The book is divided into four sections. Chapters 1 - 5 explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple and complex parts and assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. In chapter 6 you will create the final robot assembly. The physical components and corresponding Science, Technology, Engineering and Math (STEM) curriculum are available from Gears Educational Systems. All assemblies and components for the final robot assembly are provided. Chapters 7 - 10 prepare you for the Certified Associate - Mechanical Design (CSWA) exam. The certification indicates a foundation in and apprentice knowledge of 3D CAD and engineering practices and principles. Chapter 11 covers the benefits of additive manufacturing (3D printing), how it differs from subtractive manufacturing, and its features. You will also learn the terms and technology used in low cost 3D printers. Follow the step-by-step instructions and develop multiple assemblies that combine over 100 extruded machined parts and components. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, apply proper design intent, design tables and configurations. Learn by doing, not just by reading. Desired outcomes and usage competencies are listed for each chapter. Know your objective up front. Follow the steps in each chapter to achieve your design goals. Work between multiple documents, features, commands, custom properties and document properties that represent how engineers and designers utilize SOLIDWORKS in industry.

Author : James D. Bethune
Publisher : Macromedia Press
Page : 1532 pages
File Size : 52,5 Mb
Release : 2019-06-12
Category : Technology & Engineering
ISBN : 9780135401668

Get Book

Engineering Design and Graphics with SolidWorks 2019 by James D. Bethune Pdf

In Engineering Design and Graphics with SolidWorks 2019, award-winning CAD instructor and author James Bethune shows students how to use SolidWorks to create engineering drawings and designs. The textbook has been updated to cover the new features in SolidWorks 2019, including a brand-new chapter with sample problems to help students prepare for the CSWA Exam. It focuses on the creation of engineering drawings, including dimensions and tolerances and the use of standard parts and tools. Each chapter contains step-by-step sample problems that show students how to apply the concepts presented in the chapter. Effective pedagogy throughout the text helps students learn and retain concepts: OBJECTIVES: Each chapter begins with objectives and an introduction to the material. SUMMARIES: Each chapter concludes with a summary and exercise problems. NUMEROUS ILLUSTRATIONS: The multitude of illustrations, accompanied by explanatory captions, present a visual approach to learning. Students see in the text what they see on the screen with the addition of explanatory text. PRACTICAL APPLICATION: The text provides hundreds of exercise projects of varying difficulty (far more than any other computer graphics text). These exercises reinforce each chapter’s content and help students learn by doing. FLEXIBILITY: With the hundreds of problems presented in the book, instructors can assign different problems within the same class and from year to year without repeating problems for students. MEETS STANDARDS: The text teaches ANSI standards for dimensions and tolerances. This helps students understand how their designs are defined for production and the importance of proper tolerancing. STEP-BY-STEP APPROACH: In presenting the fundamentals of engineering drawing using SolidWorks, the text uses a step-by-step approach that allows students to work and learn at their own pace. CSWA EXAM PREP: This edition includes sample problems to help students prepare for the CSWA Exam.

Author : Ronald E. Barr
Publisher : Unknown
Page : 0 pages
File Size : 48,9 Mb
Release : 2009-07
Category : Electronic
ISBN : 158503519X

Get Book

Engineering and Computer Graphics Workbook Using SolidWorks 2009 by Ronald E. Barr Pdf

Engineering & Computer Graphics Workbook Using SolidWorks 2009 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SolidWorks 2009. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SolidWorks. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing.

Author : Randy Shih
Publisher : SDC Publications
Page : 750 pages
File Size : 53,7 Mb
Release : 2018-12-31
Category : Computers
ISBN : 9781630572402

Get Book

SOLIDWORKS 2019 and Engineering Graphics by Randy Shih Pdf

SOLIDWORKS 2019 and Engineering Graphics: An Integrated Approach combines an introduction to SOLIDWORKS 2019 with a comprehensive coverage of engineering graphics principles. Not only will this unified approach give your course a smoother flow, your students will also save money on their textbooks. What’s more, the exercises in this book cover the performance tasks that are included on the Certified SOLIDWORKS Associate (CSWA) Examination. Reference guides located at the front of the book and in each chapter show where these performance tasks are covered. The primary goal of SOLIDWORKS 2019 and Engineering Graphics: An Integrated Approach is to introduce the aspects of Engineering Graphics with the use of modern Computer Aided Design package – SOLIDWORKS 2019. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of sixteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphics language used in all branches of technical industry. This book does not attempt to cover all of SOLIDWORKS 2019’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Author : Paul Schilling,Randy Shih
Publisher : SDC Publications
Page : 608 pages
File Size : 53,9 Mb
Release : 2019-01-21
Category : Computers
ISBN : 9781630572259

Get Book

Parametric Modeling with SOLIDWORKS 2019 by Paul Schilling,Randy Shih Pdf

Parametric Modeling with SOLIDWORKS 2019 contains a series of seventeen tutorial style lessons designed to introduce SOLIDWORKS 2019, solid modeling and parametric modeling techniques and concepts. This book introduces SOLIDWORKS 2019 on a step-by-step basis, starting with constructing basic shapes, all the way through to the creation of assembly drawings and motion analysis. This book takes a hands on, exercise intensive approach to all the important parametric modeling techniques and concepts. Each lesson introduces a new set of commands and concepts, building on previous lessons. The lessons guide the user from constructing basic shapes to building intelligent solid models, assemblies and creating multi-view drawings. This book also covers some of the more advanced features of SOLIDWORKS 2019, including how to use the SOLIDWORKS Design Library, basic motion analysis, collision detection and analysis with SimulationXpress. The exercises in this book cover the performance tasks that are included on the Certified SOLIDWORKS Associate (CSWA) Examination. Reference guides located at the front of the book and in each chapter show where these performance tasks are covered. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects and by the end of this book you will be ready to start printing out your own designs.