Job Shop Lean

Author : Shahrukh A. Irani
Publisher : CRC Press
Page : 692 pages
File Size : 40,6 Mb
Release : 2020-05-04
Category : Business & Economics
ISBN : 9781000055610

Get Book

Job Shop Lean by Shahrukh A. Irani Pdf

In the 1950’s, the design and implementation of the Toyota Production System (TPS) within Toyota had begun. In the 1960’s, Group Technology (GT) and Cellular Manufacturing (CM) were used by Serck Audco Valves, a high-mix low-volume (HMLV) manufacturer in the United Kingdom, to guide enterprise-wide transformation. In 1996, the publication of the book Lean Thinking introduced the entire world to Lean. Job Shop Lean integrates Lean with GT and CM by using the five Principles of Lean to guide its implementation: (1) identify value, (2) map the value stream, (3) create flow, (4) establish pull, and (5) seek perfection. Unfortunately, the tools typically used to implement the Principles of Lean are incapable of solving the three Industrial Engineering problems that HMLV manufacturers face when implementing Lean: (1) finding the product families in a product mix with hundreds of different products, (2) designing a flexible factory layout that "fits" hundreds of different product routings, and (3) scheduling a multi-product multi-machine production system subject to finite capacity constraints. Based on the Author’s 20+ years of learning, teaching, researching, and implementing Job Shop Lean since 1999, this book Describes the concepts, tools, software, implementation methodology, and barriers to successful implementation of Lean in HMLV production systems Utilizes Production Flow Analysis instead of Value Stream Mapping to eliminate waste in different levels of any HMLV manufacturing enterprise Solves the three Industrial Engineering problems that were mentioned earlier using software like PFAST (Production Flow Analysis and Simplification Toolkit), Sgetti and Schedlyzer Explains how the one-at-a-time implementation of manufacturing cells constitutes a long-term strategy for Continuous Improvement Explains how product families and manufacturing cells are the basis for implementing flexible automation, machine monitoring, virtual cells, Manufacturing Execution Systems, and other elements of Industry 4.0 Teaches a new method, Value Network Mapping, to visualize large multi-product multi-machine production systems whose Value Streams share many processes Includes real success stories of Job Shop Lean implementation in a variety of production systems such as a forge shop, a machine shop, a fabrication facility and a shipping department Encourages any HMLV manufacturer planning to implement Job Shop Lean to leverage the co-curricular and extracurricular programs of an Industrial Engineering department

Author : John Macchia
Publisher : MCS Media, Inc.
Page : 196 pages
File Size : 50,7 Mb
Release : 2004
Category : Costs, Industrial
ISBN : 0972572880

Get Book

BackStreet Lean by John Macchia Pdf

Author : Greg Lane
Publisher : CRC Press
Page : 276 pages
File Size : 51,8 Mb
Release : 2020-03-09
Category : Business & Economics
ISBN : 9781420086881

Get Book

Made-to-Order Lean by Greg Lane Pdf

Toyota Production System methods have rendered remarkable results in high-volume manufacturing plants, but they have not been fully understood and correctly applied in high-mix, low-volume environments. While lean principles do apply, the implementation methods and tools must be adapted and alternate methods embraced in a low-volume environment. This volume is specifically geared for manufacturers that have hundreds to thousands of active part numbers with few or no ongoing forecasted volumes, and for job shops that build only to order. The primary focus is eliminating non-value-added activities and instituting improvements on the most repetitive jobs, a strategy that gives you more time to produce your low-volume work or one-offs. About the author: Greg Lane is a faculty member of the Lean Enterprise Institute and an advisor to the Instituto de Lean Management in Spain. During his time with Toyota, he was one of a handful of candidates selected for a one-year training program conducted by the company’s masters. He became certified as a Toyota Production System (TPS) Key Person and continued his work with Toyota, training others in TPS. He has been highly active in working on implementing lean around the world, supporting large and small companies alike. In 1998, he began to focus his lean endeavors on meeting the specific needs of high-mix, low-volume enterprises. During his time as an independent consultant, Greg purchased and operated his own manufacturing company, which specialized in fast turnaround on high-mix, low-volume parts. Greg used TPS to grow the business and nearly double its sales. Greg and his associates have experience not only at adapting the methods contained in this book, but also in applying other tools that are too numerous to detail here. They can be reached for further support with your lean transformation via email: [email protected]

Author : Vincent Bozzone
Publisher : Amacom Books
Page : 230 pages
File Size : 51,7 Mb
Release : 2002
Category : Business & Economics
ISBN : 0814406947

Get Book

Speed to Market by Vincent Bozzone Pdf

"Lean manufacturing is the single most effective way to increase sales, cut costs, improve margins, and secure the future of a business. The problem is that the principles and philosophies of lean manufacturing are geared strictly to mass production operations--and can be ineffective, even detrimental, for smaller job shops and make-to-order businesses. Now, Speed to Market delivers a proven approach for smaller suppliers who want to successfully cut their lead time and trigger profitable growth. Completely updated and expanded, the book explains how to: * Apply the principles of pull, flow, and the elimination of waste to every area of the company, at every stage from ""quotes to cash"" * Implement a continuous improvement process--while sidestepping the typical implementation pitfalls * Ease scheduling problems * Improve performance and profitability using the book's practical concepts, process analysis tools, and perspective-enhancing techniques--and much more."

Author : Vincent Bozzone
Publisher : AMACOM/American Management Association
Page : 268 pages
File Size : 51,9 Mb
Release : 2001
Category : Business & Economics
ISBN : 0814426603

Get Book

Speed to Market by Vincent Bozzone Pdf

Lean manufacturing is the single most effective way to increase sales, cut costs, improve margins, and secure the future of a business. The problem is that the principles and philosophies of lean manufacturing are geared strictly to mass production operations and can be ineffective, even detrimental, for smaller job shops and make-to-order businesses. Now, Speed to Market delivers a proven approach for smaller suppliers who want to successfully cut their lead time and trigger profitable growth. Completely updated and expanded, the book explains how to: * Apply the principles of pull, flow, and the elimination of waste to every area of the company, at every stage from quotes to cash* Implement a continuous improvement process while sidestepping the typical implementation pitfalls* Ease scheduling problems* Improve performance and profitability using the book's practical concepts, process analysis tools, and perspective-enhancing techniques and much more

Author : Shahrukh Irani
Publisher : Productivity Press
Page : 352 pages
File Size : 49,8 Mb
Release : 2016-05-15
Category : Business & Economics
ISBN : 1498740693

Get Book

Lean for High-Mix-Low-Volume Manufacturers by Shahrukh Irani Pdf

The book integrates tehniques from the Toyota Production System (TPS) that apply to high-mix low-volume with the science of Group Technology and Cellular Manufacturing (GT/CM) to replace those parts of theTPS that pertain solely to high-volume, repeatable processes. GT/CM is the technical solution to Lean for high-mix low-volume. Toyota provides the tools to sustain GT/CM, especially the workforce culture and Lean leadership aspects

Author : Gary Conner
Publisher : Society of Manufacturing Engineers
Page : 361 pages
File Size : 51,5 Mb
Release : 2009
Category : Business & Economics
ISBN : 9780872638587

Get Book

Lean Manufacturing for the Small Shop, Second Edition by Gary Conner Pdf

A how-to guide to shortening delivery times, eliminating waste, improving quality, and reducing costs. It describes not only what to do, but includes many tools useful to the reader describing how to do it. It explores tools including kaizen, value stream mapping, takt time, determining optimum lot sizes, setup reduction and problem solving.

Author : Greg Lane
Publisher : CRC Press
Page : 296 pages
File Size : 49,6 Mb
Release : 2009-12-17
Category : Business & Economics
ISBN : 9781439815175

Get Book

Mr. Lean Buys and Transforms a Manufacturing Company by Greg Lane Pdf

This is the true story of how, armed with only Lean improvement methodologies, a specially trained Toyota Lean expert purchased a business he knew nothing about, applied Lean techniques, and succeeded in doubling sales and increasing profitability, before he finally sold the thriving business. With humility and humor, the author recounts his successes and failures, introduces his key employees and their struggles with change, and provides motivation and simple ideas for all readers looking to improve their businesses. He captures key points highlighted in text boxes and includes illustrative photos and examples of Lean tools at work. This story dispels the fallacy that Lean management does not achieve excellent results in high variation companies and job shops. Toyota’s OSKKK methodology is introduced to understand processes and guide a Lean transformation on the shop floor and in the office.

Author : Anonim
Publisher : MCS Media, Inc.
Page : 64 pages
File Size : 52,9 Mb
Release : 2004
Category : Costs, Industrial
ISBN : 0972572899

Get Book

The Lean Assessment for Job Shops and Small Manufacturers by Anonim Pdf

Author : Roger Kremer,Tom Fabrizio
Publisher : MCS Media, Inc.
Page : 104 pages
File Size : 52,8 Mb
Release : 2005
Category : Costs, Industrial
ISBN : 0972572856

Get Book

The Lean Primer - Solutions for the Job Shop by Roger Kremer,Tom Fabrizio Pdf

Author : Christoph Roser
Publisher : Allaboutlean.com Publishing
Page : 442 pages
File Size : 54,8 Mb
Release : 2021-04-03
Category : Electronic
ISBN : 3963820284

Get Book

All About Pull Production by Christoph Roser Pdf

All About Pull Production is a practical guide for anyone looking to implement pull systems. It focuses on practical application and values functionality over theory, albeit it explains the underlying relations. It is not a high-level philosophical discussion of lean, but a book to help you roll up your sleeves and get the job done. It is written for the practitioner. If you are working in production or logistics and want to implement pull, then this book is for you. It also serves as a useful reference for students and researchers of lean manufacturing. With a foreword by John Shook. Praise for All About Pull Production "This book provides you the means to create supply systems for the rapidly evolving complexities of the twenty-first century, anywhere, in any industry."-John Shook, Chairman, Lean Global Network "Prof. Roser is the go-to source for anything about lean. With this comprehensive book on pull production he has written an authoritative work. Highly recommended for anyone interested in getting to the heart of Toyota's pull principle."-Dr. Torbjørn Netland, Professor of Production and Operations Management, ETH Zürich "This book explains pull production very well and in an excellent style. The book definitely demystifies pull. Without doubt, the book will be the go-to guide for both beginners and experienced practitioners."-Cheong Tsang, Bosch Plant Manager (Retired) "Readers will definitely obtain a lot of valuable insights and new ideas from this book on pull production."-Dr. Masaru Nakano, Professor, Keio University; Former Toyota Manager "This is by far the best in-depth exploration of pull. It is amazingly comprehensive, including warnings, common errors, and applicability of various pull systems. I am sure that it will become THE standard reference book on pull systems."-Dr. John Bicheno, Emeritus Professor of Lean Enterprise, University of Buckingham "This book presents pull production control in a comprehensive and practice-oriented way for students and practitioners alike."-Dr.-Ing. Jochen Deuse, Professor, Head of Institute of Production Systems, TU Dortmund University; Director Centre for Advanced Manufacturing, University of Technology Sydney "The book provides well structured, in-depth insights in the application of pull systems, from Kanban to less-known but powerful alternatives. The book is a valuable source for students and practitioners in industry, from lean experts to production managers."-Dr.-Ing. Ralph Richter, Former Head of the Bosch Production System and Plant Manager at Bosch "With this deeply researched and considered book, Prof. Roser goes beyond the simple explanations of pull to reveal pull production in its compelling simplicity. The results provide a convincing case and trusty guide."-Peter Willats, Professor, University of Buckingham, Co-Founder, Kaizen Institute of Europe "Anyone considering a pull system should read this book."-Mark Warren, Manufacturing Engineer and Production Historian "What you have put together in this book is amazing-this may become your magnum opus in due course! It's going to be a great reference resource for practitioners and academics."-Dr. Rajan Suri, Emeritus Professor of Industrial Engineering, University of Wisconsin-Madison, Inventor of POLCA "This book is excellent material for understanding and using pull production. It is very informative and written in a very polite and pleasant personal style with good reflections and clarifications."-Dr. Björn Johansson, Professor of Sustainable Production, Chalmers University of Technology, Sweden

Author : Kevin J. Duggan
Publisher : CRC Press
Page : 258 pages
File Size : 49,9 Mb
Release : 2018-02-05
Category : Business & Economics
ISBN : 9781439868447

Get Book

Creating Mixed Model Value Streams by Kevin J. Duggan Pdf

Following in the footsteps of its bestselling predecessor, Kevin J. Duggan, an executive mentor and recognized authority on Lean and Operational Excellence, draws on more than 10 years of experience and learning to provide Creating Mixed Model Value Streams, Second Edition. This second edition takes a step-by-step approach to implementing Lean in c

Author : Matthew Zayko,Eric Ethington
Publisher : CRC Press
Page : 253 pages
File Size : 55,8 Mb
Release : 2021-10-28
Category : Business & Economics
ISBN : 9781000462029

Get Book

The Power of Process by Matthew Zayko,Eric Ethington Pdf

Lean Process Creation teaches the specific frames—the 6CON model—to look through to properly design any new process while optimizing the value-creating resources. The framing is applicable to create any process that involves people, technology, or equipment—whether the application is in manufacturing, healthcare, services, retail, or other industries. If you have a process, this approach will help. The result is 30% to 50% improvement in first-time quality, customer lead time, capital efficiency, labor productivity, and floorspace that could add up to millions of dollars saved per year. More important, it will increase both employee and customer satisfaction. The book details a case study from a manufacturing standpoint, starting with a tangible example to reinforce the 6CON model. This is the first book written from this viewpoint—connecting a realistic transformation with the detailed technical challenges, as well as the engagement of the stakeholders, each with their own bias. Key points and must-do actions are sprinkled throughout the case study to reinforce learning from the specific to the general. In this study, an empowered working team is charged with developing a new production line for a critical new product. As the story unfolds, they create an improved process that saves $5.6 million (10x payback on upfront resource investment) over the short life cycle of the product, as well as other measurable benefits in quality, ergonomics, and delivery. To an even greater benefit, they establish a new way of working that can be applied to all future process creation activities. Some organizations have tried their version of Lean process design following a formula or cookie-cutter approach. But true Lean process design goes well beyond forcing concepts and slogans into every situation. It is purposeful, scientific, and adaptable because every situation starts with a unique current state. In addition, Lean process design must include both the technical and social aspects, as they are essential to sustaining and improving any system. Observing the recurring problem of reworking processes that were newly launched brought the authors to the conclusion that a practical book focused on introducing the critical frames of Lean process creation was needed. This book enables readers to consider the details within each frame that must be addressed to create a Lean process. No slogans, no absolutes. Real thinking is required. This type of thinking is best learned from an example, so the authors provide this case study to demonstrate the thinking that should be applied to any process. High volume or low, simple or complex mix, manufacturing or service/transactional—the framing and thinking works. Along with the thinking, readers are enabled to derive their own future states. This is demonstrated in the story that surrounds the case study.

Author : James P. Womack,Daniel T. Jones
Publisher : Simon and Schuster
Page : 400 pages
File Size : 55,6 Mb
Release : 2013-09-26
Category : Business & Economics
ISBN : 9781471111006

Get Book

Lean Thinking by James P. Womack,Daniel T. Jones Pdf

Lean Thinking was launched in the fall of 1996, just in time for the recession of 1997. It told the story of how American, European, and Japanese firms applied a simple set of principles called 'lean thinking' to survive the recession of 1991 and grow steadily in sales and profits through 1996. Even though the recession of 1997 never happened, companies were starving for information on how to make themselves leaner and more efficient. Now we are dealing with the recession of 2001 and the financial meltdown of 2002. So what happened to the exemplar firms profiled in Lean Thinking? In the new fully revised edition of this bestselling book those pioneering lean thinkers are brought up to date. Authors James Womack and Daniel Jones offer new guidelines for lean thinking firms and bring their groundbreaking practices to a brand new generation of companies that are looking to stay one step ahead of the competition.

Author : Jim Lancaster
Publisher : Lean Enterprise Institute Inc.
Page : 184 pages
File Size : 47,7 Mb
Release : 2017-07-03
Category : Business & Economics
ISBN : 9781934109540

Get Book

The Work of Management by Jim Lancaster Pdf