Machine Tools Production Systems 2

Author : Christian Brecher,Manfred Weck
Publisher : Springer Nature
Page : 850 pages
File Size : 52,9 Mb
Release : 2021-11-08
Category : Technology & Engineering
ISBN : 9783662608630

Get Book

Machine Tools Production Systems 2 by Christian Brecher,Manfred Weck Pdf

The first part of this volume provides the user with assistance in the selection and design of important machine and frame components. It also provides help with machine design, calculation and optimization of these components in terms of their static, dynamic and thermoelastic behavior. This includes machine installation, hydraulic systems, transmissions, as well as industrial design and guidelines for machine design. The second part of this volume deals with the metrological investigation and assessment of the entire machine tool or its components with respect to the properties discussed in the first part of this volume. Following an overview of the basic principles of measurement and measuring devices, the procedure for measuring them is described. Acceptance of the machine using test workpieces and the interaction between the machine and the machining process are discussed in detail. The German Machine Tools and Manufacturing Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with color technical illustrations throughout. This first English edition is a translation of the German ninth edition.

Author : Christian Brecher,Manfred Weck
Publisher : Springer Nature
Page : 712 pages
File Size : 43,5 Mb
Release : 2021-12-13
Category : Technology & Engineering
ISBN : 9783658346225

Get Book

Machine Tools Production Systems 3 by Christian Brecher,Manfred Weck Pdf

The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants. The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.

Author : Christian Brecher
Publisher : Springer Nature
Page : 526 pages
File Size : 53,7 Mb
Release : 2024-06-29
Category : Electronic
ISBN : 9783662681206

Get Book

Machine Tools Production Systems 1 by Christian Brecher Pdf

Author : Mikel Armendia,Mani Ghassempouri,Erdem Ozturk,Flavien Peysson
Publisher : Springer
Page : 296 pages
File Size : 50,8 Mb
Release : 2019-01-05
Category : Technology & Engineering
ISBN : 9783030022037

Get Book

Twin-Control by Mikel Armendia,Mani Ghassempouri,Erdem Ozturk,Flavien Peysson Pdf

This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.

Author : Posinasetti Nageswara Rao
Publisher : Unknown
Page : 521 pages
File Size : 53,5 Mb
Release : 2013
Category : Manufacturing processes
ISBN : 9383286628

Get Book

Manufacturing Technology by Posinasetti Nageswara Rao Pdf

Author : Anonim
Publisher : Unknown
Page : 688 pages
File Size : 52,8 Mb
Release : 1959
Category : Machine design
ISBN : UIUC:30112007933218

Get Book

Machinery and Production Engineering by Anonim Pdf

Author : Wasim Ahmed Khan,Ghulam Abbas,Khalid Rahman,Ghulam Hussain,Cedric Aimal Edwin
Publisher : CRC Press
Page : 354 pages
File Size : 46,7 Mb
Release : 2019-09-23
Category : Technology & Engineering
ISBN : 9780429663222

Get Book

Functional Reverse Engineering of Machine Tools by Wasim Ahmed Khan,Ghulam Abbas,Khalid Rahman,Ghulam Hussain,Cedric Aimal Edwin Pdf

The purpose of this book is to develop capacity building in strategic and non-strategic machine tool technology. The book contains chapters on how to functionally reverse engineer strategic and non-strategic computer numerical control machinery. Numerous engineering areas, such as mechanical engineering, electrical engineering, control engineering, and computer hardware and software engineering, are covered. The book offers guidelines and covers design for machine tools, prototyping, augmented reality for machine tools, modern communication strategies, and enterprises of functional reverse engineering, along with case studies. Features Presents capacity building in machine tool development Discusses engineering design for machine tools Covers prototyping of strategic and non-strategic machine tools Illustrates augmented reality for machine tools Includes Internet of Things (IoT) for machine tools

Author : E.A. Puente,L. Nemes
Publisher : Elsevier
Page : 711 pages
File Size : 53,7 Mb
Release : 2014-06-28
Category : Technology & Engineering
ISBN : 9781483298832

Get Book

Information Control Problems in Manufacturing Technology 1989 by E.A. Puente,L. Nemes Pdf

The Symposium presented and discussed the latest research on new theories and advanced applications of automatic systems, which are developed for manufacturing technology or are applicable to advanced manufacturing systems. The topics included computer integrated manufacturing, simulation and the increasingly important areas of artificial intelligence and expert systems, and applied them to the broad spectrum of problems that the modern manufacturing engineer is likely to encounter in the design and application of increasingly complex automatic systems.

Author : Robert J. Hunsberger,Rushia Owens
Publisher : Unknown
Page : 24 pages
File Size : 50,9 Mb
Release : 1969
Category : Machine-tools
ISBN : UCAL:C3126318

Get Book

Fifteen Years of Numerically Controlled Machine Tools, 1954-1968 by Robert J. Hunsberger,Rushia Owens Pdf

Author : Geoffrey Boothroyd
Publisher : CRC Press
Page : 568 pages
File Size : 41,5 Mb
Release : 1988-11-15
Category : Technology & Engineering
ISBN : 0824778529

Get Book

Fundamentals of Metal Machining and Machine Tools, Third Edition by Geoffrey Boothroyd Pdf

New edition (previous, 1975) of a textbook for a college-level course in the principles of machine tools and metal machining. Math demands are limited to introductory calculus and that encountered in basic statics and dynamics. Topics include: operations, mechanics of cutting, temperature, tool life

Author : United States. Bureau of Adult, Vocational, and Technical Education,United States. Office of Education
Publisher : Unknown
Page : 108 pages
File Size : 53,7 Mb
Release : 1970
Category : Machine-tools
ISBN : STANFORD:36105219368722

Get Book

Numerical Control of Machine Tools by United States. Bureau of Adult, Vocational, and Technical Education,United States. Office of Education Pdf

Author : B. L. Juneja
Publisher : New Age International
Page : 632 pages
File Size : 46,9 Mb
Release : 2003
Category : Machine-tools
ISBN : 8122414672

Get Book

Fundamentals of Metal Cutting and Machine Tools by B. L. Juneja Pdf

The Book Is Intended To Serve As A Textbook For The Final And Pre-Final Year B.Tech. Students Of Mechanical, Production, Aeronautical And Textile Engineering Disciplines. It Can Be Used Either For A One Or A Two Semester Course. The Book Covers The Main Areas Of Interest In Metal Machining Technology Namely Machining Processes, Machine Tools, Metal Cutting Theory And Cutting Tools. Modern Developments Such As Numerical Control, Computer-Aided Manufacture And Non-Conventional Processes Have Also Been Treated. Separate Chapters Have Been Devoted To The Important Topics Of Machine Tool Vibration, Surface Integrity And Machining Economics. Data On Recommended Cutting Speeds, Feeds And Tool Geometry For Various Operations Has Been Incorporated For Reference By The Practising Engineer.Salient Features Of Second Edition * Two New Chapters Have Been Added On Nc And Cnc Machines And Part Programming. * All Chapters Have Been Thoroughly Revised And Updated With New Information. * More Solved Examples Have Been Added. * New Material On Tool Technology. * Improved Quality Of Figures And More Photographs.

Author : Winston A. Knight,Geoffrey Boothroyd
Publisher : CRC Press
Page : 602 pages
File Size : 41,9 Mb
Release : 2019-08-08
Category : Technology & Engineering
ISBN : 9781420056303

Get Book

Fundamentals of Metal Machining and Machine Tools by Winston A. Knight,Geoffrey Boothroyd Pdf

Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.

Author : Arthur R. Gill,Peter Smid,Steve F. Krar
Publisher : McGraw-Hill Education
Page : 0 pages
File Size : 53,5 Mb
Release : 2010-01-28
Category : Technology & Engineering
ISBN : 0073510831

Get Book

Technology Of Machine Tools by Arthur R. Gill,Peter Smid,Steve F. Krar Pdf

Technology of Machine Tools 7e provides state-of-the-art training for using machine tools in manufacturing technology, including up-to-date coverage of computer numerical control (CNC). It includes an overview of machine trades and career opportunities followed by theory and application. The text is structured to provide coverage of tools and measurement, machining tools and procedures, drilling and milling machines, computer-aided machining, and metallurgy. There is expanded coverage of computer-related technologies, including computer numerical control (CNC) and computer-aided design and manufacturing (CAD/CAM). New to the Seventh Edition of Technology of Machine Tools In addition to updating the text to reflect changes in the modern business/manufacturing world today – such as direct digital manufacturing,nantotechnology, and IDI – an entirely new section on Lean Manufacturing (Section 15) has been added to focus on this industry‐prominent philosophy. Units include: Continuous Improvement: Kaizan Pull (Kanban) Systems Total Productive Maintenance Value Stream Mapping Workplace Organization

Author : Anonim
Publisher : I. K. International Pvt Ltd
Page : 376 pages
File Size : 54,7 Mb
Release : 2013-12-30
Category : Machining
ISBN : 9788189866662

Get Book

Fundamentals of Machining and Machine Tools by Anonim Pdf

Fundamentals of Machining and Machine Tools deals with analytical modeling techniques of machining processes, modern cutting tool materials and their effects on the economics of machining. The book thoroughly illustrates the causes of various phenomena and their effects on machining practice. It includes description of machining processes outlining the merits and de-merits of various modeling approaches. Spread in 22 chapters, the book is broadly divided in four sections: 1. Machining Processes 2. Cutting Tools 3. Machine Tools 4. Automation Data on cutting parameters for machining operations and main characteristics of machine tools have been separately provided in Annexures. In addition to exhaustive theory, a number of numerical examples have been solved and arranged in various chapters. Question bank has been given at the end of every chapter. The book is a must for anyone involved in metal cutting, machining, machine tool technology, machining applications, and manufacturing processes