Mechanics And Chemistry In Lubrication

Author : A. Dorinson,K.C. Ludema
Publisher : Elsevier
Page : 633 pages
File Size : 50,7 Mb
Release : 1985-08-01
Category : Technology & Engineering
ISBN : 0080875734

Get Book

Mechanics and Chemistry in Lubrication by A. Dorinson,K.C. Ludema Pdf

Although it is widely recognized that friction, wear and lubrication are linked together in a single interdisciplinary complex of scientific learning and technological practice, fragmented and specialized approaches still predominate. In this book, the authors examine lubrication from an interdisciplinary viewpoint. They demonstrate that once the treatment of lubrication is released from the confines of the fluid film concept, this interdisciplinary approach comes into full play. Tribological behavior in relation to lubrication is then examined from two major points of view: one is mechanical, not only with respect to the properties and behavior of the lubricant but also of the surfaces being lubricated. The other is chemical and encompasses the chemistry of the lubricant, the surfaces and the ambient surroundings. It is in the emphasis on the interaction of the basic mechanical and chemical processes in lubrication that this book differs from conventional treatments.

Author : A. Dorinson,K.C. Ludema
Publisher : Unknown
Page : 634 pages
File Size : 44,5 Mb
Release : 1985
Category : Electronic
ISBN : 0444416773

Get Book

Mechanics and Chemistry in Lubrication by A. Dorinson,K.C. Ludema Pdf

Author : Roy M. Mortier,Malcolm F. Fox,Stefan Orszulik
Publisher : Springer Science & Business Media
Page : 561 pages
File Size : 42,5 Mb
Release : 2011-04-14
Category : Science
ISBN : 9781402086625

Get Book

Chemistry and Technology of Lubricants by Roy M. Mortier,Malcolm F. Fox,Stefan Orszulik Pdf

"Chemistry and Technology of Lubricants" describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Edition was published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. "Chemistry and Technology of Lubricants" is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.

Author : Roy M. Mortier,Stefan T. Orszulik
Publisher : Springer Science & Business Media
Page : 397 pages
File Size : 54,9 Mb
Release : 2013-06-29
Category : Technology & Engineering
ISBN : 9789401710213

Get Book

Chemistry and Technology of Lubricants by Roy M. Mortier,Stefan T. Orszulik Pdf

The use of lubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricating practice has preceded an understanding of the scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the understanding of lubricant phenomena will continue to be developed at a molecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in and continuing improvements to lubricant performance and machinery, life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and understanding gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding of lubricants.

Author : Marika Torbacke,Åsa Kassman Rudolphi,Elisabet Kassfeldt
Publisher : John Wiley & Sons
Page : 234 pages
File Size : 55,8 Mb
Release : 2014-05-12
Category : Technology & Engineering
ISBN : 9781118799741

Get Book

Lubricants by Marika Torbacke,Åsa Kassman Rudolphi,Elisabet Kassfeldt Pdf

Those working with tribology often have a background in mechanical engineering, while people working with lubricant development have a chemistry/chemical engineering background. This means they have a tradition of approaching problems in different ways. Today’s product development puts higher demands on timing and quality, requiring collaboration between people with different backgrounds. However, they can lack understanding of each other’s challenges as well as a common language, and so this book aims to bridge the gap between these two areas. Lubricants: Introduction to Properties and Performance provides an easy to understand overview of tribology and lubricant chemistry. The first part of the book is theoretical and provides an introduction to tribological contact, friction, wear and lubrication, as well as the basic concepts regarding properties and the most commonly made analyses on lubricants. Base fluids and their properties and common additives used in lubricants are also covered. The second part of the book is hands-on and introduces the reader to the actual formulations and the evaluation of their performance. Different applications and their corresponding lubricant formulations are considered and tribological test methods are discussed. Finally used oil characterisation and surface characterisation are covered which give the reader an introduction to different methods of characterising used oils and surfaces, respectively. Key features: Combines chemistry and tribology of lubricants into one unified approach Covers the fundamental theory, describing lubricant properties as well as base fluids and additives Contains practical information on the formulations of lubricants and evaluates their performance Considers applications of lubricants in hydraulics, gears and combustion engines Lubricants: Introduction to Properties and Performance is a comprehensive reference for industry practitioners (tribologists, lubricant technicians, and lubricant chemists, etc) and is also an excellent source of information for graduate and undergraduate students.

Author : R. M. Mortier,S. T. Orszulik
Publisher : Springer
Page : 318 pages
File Size : 41,6 Mb
Release : 2012-12-06
Category : Science
ISBN : 9781461532729

Get Book

Chemistry and Technology of Lubricants by R. M. Mortier,S. T. Orszulik Pdf

The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has preceded an understanding ofthe scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding oflubricants.

Author : Theo Mang,Wilfried Dresel
Publisher : John Wiley & Sons
Page : 1220 pages
File Size : 45,9 Mb
Release : 2017-05-08
Category : Science
ISBN : 9783527326709

Get Book

Lubricants and Lubrication, 2 Volume Set by Theo Mang,Wilfried Dresel Pdf

Praise for the previous edition: “Contains something for everyone involved in lubricant technology” — Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants

Author : Leslie R. Rudnick
Publisher : CRC Press
Page : 708 pages
File Size : 51,7 Mb
Release : 2017-07-12
Category : Science
ISBN : 9781498731744

Get Book

Lubricant Additives by Leslie R. Rudnick Pdf

This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.

Author : William Morris Davis
Publisher : Forgotten Books
Page : 282 pages
File Size : 43,6 Mb
Release : 2015-06-25
Category : Technology & Engineering
ISBN : 1330358805

Get Book

Friction and Lubrication by William Morris Davis Pdf

Excerpt from Friction and Lubrication: A Hand-Book for Engineers, Mechanics, Superintendents and Managers The subject of lubrication and lubricants, from a practical, or rather a mechanical point of view, has not received the attention at the hands of experienced writers that it deserves. A few books have been written on lubricants by chemists, treating these subjects wholly from a chemical standpoint; these are of great value to those who have a knowledge of chemistry, but have little of value to the mechanical man. In these days of rigid economies, and close attention to details, the engineer or manager who desires to attain to the greatest efficiency and economy in the operation of the machinery in his charge must consider closely the cost, the quality, and the best methods of applying lubricants, as well as of fuel and the other elements which enter into operation of a steam plant. The author, an engineer himself, has been for the past ten years in a position to make a close study of lubrication on many kinds of engines and machinery, and under all sorts of conditions. In presenting this book to the notice of those who have to do with the use of lubricants, while he has not endeavored to exploit any new theories, he has kept in mind the fact that engineers, managers and mechanics are busy men, and he has therefore tried to present the matter in a plain concise way, that will be readily understood by readers and be of practical value in their every day work. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Author : Theo Mang,Wilfried Dresel
Publisher : Wiley-VCH
Page : 890 pages
File Size : 40,5 Mb
Release : 2007-04-09
Category : Science
ISBN : 3527314970

Get Book

Lubricants and Lubrication by Theo Mang,Wilfried Dresel Pdf

This completely revised second edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria.

Author : Catalin I. Pruncu,Amit Aherwar,Stanislav Gorb
Publisher : CRC Press
Page : 235 pages
File Size : 41,6 Mb
Release : 2021-11-23
Category : Technology & Engineering
ISBN : 9781000475906

Get Book

Progress in Lubrication and Nano- and Biotribology by Catalin I. Pruncu,Amit Aherwar,Stanislav Gorb Pdf

Tribology is a multidisciplinary science that encompasses mechanical engineering, materials science, surface engineering, lubricants, and additives chemistry with tremendous applications. Progress in Lubrication and Nano- and Biotribology discusses the latest in lubrication engineering and nano- and biotribology. This book: Discusses green tribology and snakeskin tribology Explains biogreases and nanolubricant additives Explores applications in aerospace, additively manufactured parts, and severe environments Written for researchers and advanced students, this book encompasses a wide-ranging view of the latest in nano- and biotribology for a variety of cross-disciplinary applications.

Author : E. Richard Booser
Publisher : CRC Press
Page : 642 pages
File Size : 50,8 Mb
Release : 1993-12-21
Category : Technology & Engineering
ISBN : 1420050451

Get Book

CRC Handbook of Lubrication and Tribology, Volume III by E. Richard Booser Pdf

Volume III extends this handbook series to cover new developments and topics in tribology that have occurred during the past decade. It includes in-depth discussions on revolutionary magnetic bearings used in demanding applications in compressors, high-speed spindles, and aerospace equipment. Extensive coverage is given to tribology developments in office machines and in magnetic storage systems for computers. Monitoring sensors are addressed in the first chapter, followed by chapters on specific monitoring techniques for automobiles, diesels, and rotating machines. One chapter is devoted to procedures used for tracking the remaining life of lubricants. Synthetic lubricants are discussed by outstanding specialists in this rapidly developing field. Synthetics are increasingly important in widely diverse areas, including compressors using the new ozone-layer-friendly refrigerants and a variety of extreme-temperature and environmentally-sensitive applications. Water- and gas-lubricated bearings are given similar attention. The contributors also develop a new, unified coverage for fatigue life of ball and roller bearings; for design and application of porous metal bearings; for self-contained lubrication, involving oil rings, disks, and wicks; and for plastic bearings. Each of these classes of bearings are used by the millions daily throughout industry. The three-volume handbook is an essential reference to tribologists and lubrication, mechanical, and automotive engineers. It is invaluable to lubricant suppliers; bearing companies; those working in the aerospace industry; and anyone concerned with machine design, machinery wear, and maintenance.

Author : David Johnson
Publisher : BoD – Books on Demand
Page : 134 pages
File Size : 52,8 Mb
Release : 2018-05-23
Category : Technology & Engineering
ISBN : 9781789231281

Get Book

LubricationTribology, Lubricants and Additives by David Johnson Pdf

Tribology is an interdisciplinary area that studies the reduction of friction between moving parts combining chemistry, physics and engineering disciplines. Lubricants are typically substances used to reduce friction. This book contains two sections: the first section examines the chemistry of lubricants and additives, while the second section looks at the lubrication of different types of materials.

Author : Dieter Klamann
Publisher : Wiley-VCH
Page : 489 pages
File Size : 40,7 Mb
Release : 1984-03-19
Category : Science
ISBN : 3527260226

Get Book

Lubricants and Related Products by Dieter Klamann Pdf

Dieter Klamann Lubricants and Related Products Improved engine performance and new applications have necessitated considerable advances and developments in lubricant technology. Mineral oils without additives are rarely sufficient as lubricants for modern equipment. Rather, synthetic base oils have gained importance because their properties and behaviour can be tailored to suit their applications. Tribology and tribotechnology have become scientific disciplines of their own. They deal with all aspects of friction, wear and lubrication and are based on physics, chemistry and mechanical engineering. Their economic importance follows from the estimate that between four and five percent of the total energy consumed could be saved by better lubrication. It is the purpose of this book to present the information that is needed in order to understand the essentials of lubrication and to select the most suitable lubricant in any given case. All types of lubricants and additives are described, and methods for predicting their behaviour on the basis of physical and chemical data are reported. Moreover, standards and specifications from the major industrialized countries are reviewed and made "compatible" with the aid of conversion tables

Author : William Morris Davis
Publisher : Forgotten Books
Page : 282 pages
File Size : 50,9 Mb
Release : 2018-03-09
Category : Technology & Engineering
ISBN : 0364189487

Get Book

Friction and Lubrication by William Morris Davis Pdf

Excerpt from Friction and Lubrication: A Hand-Book for Engineers, Mechanics, Superintendents and Managers A few books have been written on lubricants by chemists, treating these subjects wholly from a chem ical standpoint; these are of great value to those who have a knowledge of chemistry, but have little of value to the mechanical man. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.