Physical Metallurgy Of Beryllium

Author : H. D. Hanes,Stanley W. Porembka,J. B. Melehan,P. J. Gripshover
Publisher : Unknown
Page : 56 pages
File Size : 43,6 Mb
Release : 1966
Category : Beryllium
ISBN : UOM:39015095158518

Get Book

Physical Metallurgy of Beryllium by H. D. Hanes,Stanley W. Porembka,J. B. Melehan,P. J. Gripshover Pdf

This report summarizes the recent work done to more fully understand the physical metallurgy of beryllium. A review of work on purification of beryllium, which has yielded high-quality single crystals, was made. The basic deformation properties of beryllium have thus been more clearly defined. The effects of certain alloying elements and impurities are also discussed. Deformation modes in polycrystalline beryllium are discussed based on the results of studies of single crystals. The texture developed in polycrystalline beryllium by fabrication and resulting effects on mechanical properties are dealt with, as well as fracture modes in single-crystal and polycrystalline beryllium. Bend-plane splitting is the method suggested for initiation of fracture in beryllium. Some effects of the distribution of impurities as a result of thermal treatment on the mechanical properties are cited. Since grain size is an important factor in determining properties, recrystallization and grain-growth phenomena are covered. The physical-metallurgical phenomena which contribute to the properties and fabricability of commercial products are discussed. (Author).

Author : Kenneth A. Walsh
Publisher : ASM International
Page : 592 pages
File Size : 42,8 Mb
Release : 2009-01-01
Category : Science
ISBN : 9780871707215

Get Book

Beryllium Chemistry and Processing by Kenneth A. Walsh Pdf

This book introduces beryllium; its history, its chemical, mechanical, and physical properties including nuclear properties. The 29 chapters include the mineralogy of beryllium and the preferred global sources of ore bodies. The identification and specifics of the industrial metallurgical processes used to form oxide from the ore and then metal from the oxide are thoroughly described. The special features of beryllium chemistry are introduced, including analytical chemical practices. Beryllium compounds of industrial interest are identified and discussed. Alloying, casting, powder processing, forming, metal removal, joining and other manufacturing processes are covered. The effect of composition and process on the mechanical and physical properties of beryllium alloys assists the reader in material selection. The physical metallurgy chapter brings conformity between chemical and physical metallurgical processing of beryllium, metal, alloys, and compounds. The environmental degradation of beryllium and its alloys both in aqueous and high temperature condition are presented. The health and environmental issues are thoroughly presented the current requirements and established practices for handling beryllium in the workplace are available. A thorough list of references will assist the user of this book.

Author : D. W. White (Jr.),Joseph Eldrid Burke
Publisher : Unknown
Page : 746 pages
File Size : 50,7 Mb
Release : 1955
Category : Technology & Engineering
ISBN : UOM:39015009844708

Get Book

The Metal Beryllium by D. W. White (Jr.),Joseph Eldrid Burke Pdf

Author : Henry H. Hausner
Publisher : Univ of California Press
Page : 330 pages
File Size : 45,8 Mb
Release : 2022-08-19
Category : Technology & Engineering
ISBN : 9780520338814

Get Book

Beryllium by Henry H. Hausner Pdf

This title is part of UC Press's Voices Revived program, which commemorates University of California Press’s mission to seek out and cultivate the brightest minds and give them voice, reach, and impact. Drawing on a backlist dating to 1893, Voices Revived makes high-quality, peer-reviewed scholarship accessible once again using print-on-demand technology. This title was originally published in 1965.

Author : Stanley W. Porembka,H. D. Hanes,P. J. Gripshover
Publisher : Unknown
Page : 32 pages
File Size : 45,8 Mb
Release : 1967
Category : Beryllium
ISBN : UOM:39015095158484

Get Book

Powder Metallurgy of Beryllium by Stanley W. Porembka,H. D. Hanes,P. J. Gripshover Pdf

This report discusses the powder metallurgy of beryllium from the preparation of powders through the production from the powders of solid products. Various methods of powder compaction are presented including die pressing, isopressing, slip casting, vibration packing and explosive compaction. Sintering, and methods of elevated temperature consolidation, including vacuum hot pressing, hot isostatic pressing, forging, extrusion, and plasma spraying, are discussed. The final sections of the report cover properties of powder beryllium products, applications of beryllium prepared by powder metallurgy and current trends in the powder metallurgy of beryllium. (Author).

Author : D. Webster
Publisher : Springer
Page : 360 pages
File Size : 53,6 Mb
Release : 1979-05
Category : Science
ISBN : UOM:39015009844542

Get Book

Beryllium Science and Technology by D. Webster Pdf

This beryllium treatise was made possible by the expertise and hard work of members of the Joint US-UK Working Group on Beryllium (JOWOG 22), which was set up in the 1960s to allow a controlled exchange of technical information on the science and application of beryllium between the two countries. The leading roles in JOWOG 22 of Dr. Lee Roberts of the Lawrence Livermore Laboratory and Dr. Geoffrey Ellis ofthe Atomic Weapons Research Establishment (A WRE) at Aldermaston are particularly noteworthy. Excerpts from so me of the material in this book were presented at an international conference "Beryllium 77" in London in October 1977. The conference, which was superbly organized by Dr. John Martin and his co workers at A WRE, was sponsored by the Metals Society and the Institu tion of Metallurgists, and was particularly instructive in revealing the unexpectedly strong position of the USSR in some aspects of beryllium physical metallurgy and ductility improvement. Advance publicity for this book was also provided by presentations at the AlME 1977 annual meeting in Atlanta, Georgia. The presentations were co-sponsored by the Metal lurgy and Non-Ferrous Metals Committees at the request of committee members John E. Smugeresky and Gilbert J. London. D. Webster G. J. London vii Contents 1 • Introduction .... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . .

Author : William J. Kroll
Publisher : Unknown
Page : 20 pages
File Size : 54,7 Mb
Release : 1945
Category : Beryllium
ISBN : UOM:39015074127609

Get Book

Extractive Metallurgy of Beryllium by William J. Kroll Pdf

Author : Rointan F. Bunshah
Publisher : Unknown
Page : 32 pages
File Size : 46,6 Mb
Release : 1963
Category : Beryllium
ISBN : UOM:39015077598475

Get Book

Future Trends in Beryllium Metallurgy Research by Rointan F. Bunshah Pdf

Author : Webster Hodge
Publisher : Unknown
Page : 232 pages
File Size : 46,8 Mb
Release : 1962
Category : Beryllium
ISBN : UOM:39015095154863

Get Book

Beryllium for Structural Applications by Webster Hodge Pdf

Reports of Government-supported research on the physical and process metallurgy of beryllium that were received at DMIC during the period 1958-1960, inclusive, are summarized, together with some reports and publications of foreign authors. No proprietary or classified information is included. In addition, reference is made to some of the more importa t writings on health hazards and safety procedures that appeared during the period covered. (Author).

Author : Judy W. Montoya,R. G. Havens,D. W. Bridges
Publisher : Unknown
Page : 24 pages
File Size : 52,5 Mb
Release : 1962
Category : Beryllium
ISBN : UOM:39015078481762

Get Book

Beryllium-bearing Tuff from Spor Mountain, Utah by Judy W. Montoya,R. G. Havens,D. W. Bridges Pdf

Author : Miklós Tisza
Publisher : ASM International
Page : 410 pages
File Size : 51,7 Mb
Release : 2001-01-01
Category : Technology & Engineering
ISBN : 161503241X

Get Book

Physical Metallurgy for Engineers by Miklós Tisza Pdf

This book should be a valuable reference for experienced metallurgists, mechanical engineers, and students seeking a practical technical introduction to metallurgy. Contents are based on lectures designed for undergraduate students in mechanical engineering, and the book is an excellent introduction to the fundamentals of applied metallurgy. The book also contains numerous graphs, tables, and explanations that can prove useful even for experienced metallurgists and researchers. Contents cover both the fundamental and applied aspects of metallurgy. The first half of the book covers the basic principles of metallurgy, the behavior of crystalline materials, and the underlying materials concepts related to the mechanical properties of metals. The second half focuses on applied physical metallurgy. This includes coverage of the metallurgy of common alloys systems such as carbon steels, alloyed steels, cast iron, and nonferrous alloys.Contents include: Introduction to Physical Metallurgy The Atomic Structure of Materials Fundamentals of Crystal Structure Basic Rules of Crystallization Imperfections in Crystalline Solids Mechanical Properties of Single-Phase Metallic Materials Metallic Alloys Equilibrium Crystallization of Iron-Carbon Alloys Non-Equilibrium Crystallization of Iron-Carbon Alloys Plain Carbon Steels Alloyed Steels Cast Iron Nonferrous Metals and Alloys.

Author : C. W. Price
Publisher : Unknown
Page : 22 pages
File Size : 51,7 Mb
Release : 1968
Category : Beryllium
ISBN : UOM:39015095156181

Get Book

A Review of Metallographic Preparation Procedures for Beryllium and Beryllium Alloys by C. W. Price Pdf

The Memorandum is divided into four topics: (1) Grinding, (2) Polishing, (3) Etching, and (4) Thining for transmission electron microscopy. Procedures reviewed are also listed in tabular form for ready reference. In addition to reviewing published references, the authors have included a considerable amount of previously unpublished data based on their own experience and private communication with associates in the field. (Author).

Author : Geoffrey V. Raynor
Publisher : Pergamon
Page : 554 pages
File Size : 50,6 Mb
Release : 1959
Category : Science
ISBN : UOM:39015002935487

Get Book

The Physical Metallurgy of Magnesium and Its Alloys by Geoffrey V. Raynor Pdf

Author : Evan Robert Petty
Publisher : Unknown
Page : 326 pages
File Size : 54,6 Mb
Release : 1970
Category : Technology & Engineering
ISBN : WISC:89038842175

Get Book

Physical Metallurgy of Engineering Materials by Evan Robert Petty Pdf

Author : Henry Herman Hausner
Publisher : Univ of California Press
Page : 342 pages
File Size : 53,5 Mb
Release : 2024-07-02
Category : Electronic
ISBN : 8210379456XXX

Get Book

Berllium its Metallurgy and Properties by Henry Herman Hausner Pdf