Product Data Interfaces In Cad Cam Applications

Author : J. Encarnacao,R. Schuster,E. Vöge
Publisher : Springer Science & Business Media
Page : 264 pages
File Size : 41,8 Mb
Release : 2012-12-06
Category : Computers
ISBN : 9783642824265

Get Book

Product Data Interfaces in CAD/CAM Applications by J. Encarnacao,R. Schuster,E. Vöge Pdf

Interest in product data exchange and interfaces in the CAD/CAM area is steadi ly growing. The rapidly increasing graphics applications in engineering and sci ence has led to a great variety of heterogeneous hardware and software products. This has become a major obstacle in the progress of systems integration. To improve this situation CAD/CAM users have called for specification and imple mentation of standardized product data interfaces. These needs resulted in the definition of preliminary standards in this area. Since 1975 activities have been concentrated on developing standards for three major areas: - computer graphics, - sculptured surfaces, and - data exchange for engineering drawings. The Graphical Kernel System (GKS) has been accepted as an international standard for graphics programming in 1984, Y14.26M (IGES) was adopted as an American Standard in 1981 and the VDA Surface Interface (VDAFS) has been accepted by the German National Standardization Institute (DIN NAM 96.4). Although considerable progress has been achieved, the complexity of the subject and the dynamics of the CAD/CAM-development still calls for more generality and compatibility of the interfaces. This has resulted in an inter national discussion on further improvements of the standards. The major goal of this book is to bring together the different views and experiences in industry and university in the area of Product Data Interfaces, thereby contributing to the ongoing work in improving the state of the art.

Author : Maurice M. de Ruiter
Publisher : Springer Science & Business Media
Page : 414 pages
File Size : 45,8 Mb
Release : 1988-04-29
Category : Computers
ISBN : 354018788X

Get Book

Advances in Computer Graphics III by Maurice M. de Ruiter Pdf

The material in this book was presented in the tutorial programme of the Eurographics '87 Conference, held in Amsterdam, The Netherlands, 1987. The book contains eight contributions, from leading experts in each field. Major aspects of computer graphics fundamentals, interactive techniques and three-dimensional modelling techniques are discussed and a state-of-the-art survey on the increasingly important area of desktop publishing is given. The theory of fractals is covered by presenting a thorough treatment of their mathematics and programming. Furthermore, overviews of several topics, such as the theory and methods of modelling three-dimensional shapes and objects, the fundamental concepts and current advances in user interface management systems, and existing CAD-interface specifications, are included. The book will be of interest to systems designers, application programmers and researchers who wish to gain a deeper knowledge of the state-of-the-art in the areas covered.

Author : Werner Purgathofer,Jürgen Schönhut
Publisher : Springer Science & Business Media
Page : 228 pages
File Size : 55,9 Mb
Release : 2012-12-06
Category : Computers
ISBN : 9783642613401

Get Book

Advances in Computer Graphics V by Werner Purgathofer,Jürgen Schönhut Pdf

This book collects together several of the tutorials held at EUROGRAPHICS'89 in Hamburg. The conference was held under the motto "Integration, Visualisation, Interaction" and the tutorials reflect the conference theme. The Springer series EurographicSeminars with the volumes "Advances in Computer Graphics" regularly provides a professional update on current mainstream topics in the field. These publications give readers the opportunity to inform themselves thoroughly on the topics covered. The success of the series is mainly based on the expertise of the contributing authors, who are recognized professionals in their field. Starting out with one of the conference's main topics, the chapter "Visualization of Scientific Data" gives an overview of methods for displaying scientific results in an easily surveyable and comprehensible form. It presents algorithms and methods utilized to achieve visualization results in a form adequate for humans. User interfaces for such systems are also explored, and practical conclusions are drawn. The chapter "Color in Computer Graphics" describes the problems of manipulating and matching color in the real world. After some fundamental statements about color models and their relationships, the main emphasis is placed on the problem of objective color specification for computer graphics systems. It is very hard to match colors between devices such as scanners, printers and displays. Some suggestions on the effective use of color for graphics are also made.

Author : John Stark
Publisher : CRC Press
Page : 272 pages
File Size : 47,6 Mb
Release : 2021-05-30
Category : Computers
ISBN : 9781000444506

Get Book

What Every Engineer Should Know about Practical Cad/cam Applications by John Stark Pdf

This book presents basic information on CAD/CAM and describes how to select, implement, and run a CAD/CAM system in the mechanical engineering environment. It also describes the overall state of CAD/CAM today in different industrial sectors and for different manufacturing technologies.

Author : Mamoru Hosaka
Publisher : Springer Science & Business Media
Page : 364 pages
File Size : 54,8 Mb
Release : 2012-12-06
Category : Computers
ISBN : 9783642765988

Get Book

Modeling of Curves and Surfaces in CAD/CAM by Mamoru Hosaka Pdf

1 Aims and Features of This Book The contents of t. his book were originally planned t. o be included in a book en titled Geometric lIIodeling and CAD/CAM to be written by M. Hosaka and F. Kimura, but since the draft. of my part of the book was finished much earlier than Kimura's, we decided to publish this part separately at first. In it, geometrically oriented basic methods and tools used for analysis and synthesis of curves and surfaces used in CAD/CAM, various expressions and manipulations of free-form surface patches and their connection, interference as well as their qualit. y eval uation are treated. They are important elements and procedures of geometric models. And construction and utilization of geometric models which include free-form surfaces are explained in the application examples, in which the meth ods and the techniques described in this book were used. In the succeeding book which Kimura is to write, advanced topics such as data structures of geometric models, non-manifold models, geometric inference as well as tolerance problems and product models, process planning and so on are to be included. Conse quently, the title of this book is changed to Modeling of Curves and Surfaces in CAD/CAM. Features of this book are the following. Though there are excellent text books in the same field such as G. Farin's Curves and Surfaces for CAD /CAM[l] and C. M.

Author : Anupam Saxena,Birendra Sahay
Publisher : Springer Science & Business Media
Page : 394 pages
File Size : 44,7 Mb
Release : 2007-12-08
Category : Technology & Engineering
ISBN : 9781402038716

Get Book

Computer Aided Engineering Design by Anupam Saxena,Birendra Sahay Pdf

A new discipline is said to attain maturity when the subject matter takes the shape of a textbook. Several textbooks later, the discipline tends to acquire a firm place in the curriculum for teaching and learning. Computer Aided Engineering Design (CAED), barely three decades old, is interdisciplinary in nature whose boundaries are still expanding. However, it draws its core strength from several acknowledged and diverse areas such as computer graphics, differential geometry, Boolean algebra, computational geometry, topological spaces, numerical analysis, mechanics of solids, engineering design and a few others. CAED also needs to show its strong linkages with Computer Aided Manufacturing (CAM). As is true with any growing discipline, the literature is widespread in research journals, edited books, and conference proceedings. Various textbooks have appeared with different biases, like geometric modeling, computer graphics, and CAD/CAM over the last decade. This book goes into mathematical foundations and the core subjects of CAED without allowing itself to be overshadowed by computer graphics. It is written in a logical and thorough manner for use mainly by senior and graduate level students as well as users and developers of CAD software. The book covers (a) The fundamental concepts of geometric modeling so that a real understanding of designing synthetic surfaces and solid modeling can be achieved. (b) A wide spectrum of CAED topics such as CAD of linkages and machine elements, finite element analysis, optimization. (c) Application of these methods to real world problems.

Author : Richard Schuster,Dietmar Trippner,Michael Endres
Publisher : Springer Science & Business Media
Page : 245 pages
File Size : 45,7 Mb
Release : 2013-12-01
Category : Computers
ISBN : 9783642840586

Get Book

CAD*I Drafting Model by Richard Schuster,Dietmar Trippner,Michael Endres Pdf

The content of this book is an information model for technical drawings, the so-called "Drafting Model". The Drafting Model is a part of a complex information model describing product definition data, their applications and their representations. The definition of the information model is a central component of the development of STEP, a future international standard for the exchange of product defmition data. Here the Drafting Model particularly encloses descriptions for the representations of organizational drawing data, tolerances, dimensions and surface attributes such as surface fmish symbols (a survey of the whole content is shown in the figure above). Additional to that requirements for the Presentation Model concerning the representation of geometry as well as the integration process for both the Drafting and the Presentation Models are formulated. The extent of the Drafting Model is restricted to the application area "Mechanical Engineering". Within the Drafting Model the annotation representations are described on the one hand informally and on the other hand formally using a high level language for information modeling, EXPRESS. Principally the representations of the annotation are described according to the international drawing standards. Thus the semantics pertinent to the specific graphical appearance are maintained. The data structures provide formal descriptions of annotations at a high generation level, which means that a "way" is defmed how to generate these annotations.

Author : Anonim
Publisher : Unknown
Page : 934 pages
File Size : 49,9 Mb
Release : 1987
Category : Mechanics, Applied
ISBN : UIUC:30112008993468

Get Book

Applied Mechanics Reviews by Anonim Pdf

Author : J. Miguel Nóbrega,Hrvoje Jasak
Publisher : Springer
Page : 536 pages
File Size : 53,5 Mb
Release : 2019-01-24
Category : Technology & Engineering
ISBN : 9783319608464

Get Book

OpenFOAM® by J. Miguel Nóbrega,Hrvoje Jasak Pdf

This book contains selected papers of the 11th OpenFOAM® Workshop that was held in Guimarães, Portugal, June 26 - 30, 2016. The 11th OpenFOAM® Workshop had more than 140 technical/scientific presentations and 30 courses, and was attended by circa 300 individuals, representing 180 institutions and 30 countries, from all continents. The OpenFOAM® Workshop provided a forum for researchers, industrial users, software developers, consultants and academics working with OpenFOAM® technology. The central part of the Workshop was the two-day conference, where presentations and posters on industrial applications and academic research were shown. OpenFOAM® (Open Source Field Operation and Manipulation) is a free, open source computational toolbox that has a larger user base across most areas of engineering and science, from both commercial and academic organizations. As a technology, OpenFOAM® provides an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to solid dynamics and electromagnetics, among several others. Additionally, the OpenFOAM technology offers complete freedom to customize and extend its functionalities.

Author : P.C.C. Wang
Publisher : Springer Science & Business Media
Page : 219 pages
File Size : 51,8 Mb
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 9781461328193

Get Book

Advances in CAD/CAM by P.C.C. Wang Pdf

To understand what we know and be aware of what is to be known has become the central focus in the treatment of CAD/CAM issues. It has been some time since we began treating issues arriving from engineering data handling in a low key fashion because of its housekeeping chores and data maintenance aspects representing nonglamorous issues related to automation. Since the advent of CAD/CAM,large numbers of data bases have been generated through standalone CAD systems. And the rate of this automated means of generating data is rapidly increasing; this is possibly the key factor in changing our way of looking at engineering data related problems. As one deeply involved with engineering data handling and CAD/CAM applications, I know that to succeed, we must do our homework: tracking the trends, keeping abreast of new technologies, new applications, new companies and products that are exploding on the scene every day. In today's fast-paced information handling era, just keeping up is a full-time job. That is why ATI has initiated these publications, in order to bring to the users some of the information regarding their experiences in the important fields of CAD/CAM and engineering data handling. This volume contains some of the paper, including revisions, which were presented at the Fifth Automation Technology Conference held in Monterey, California. A series of publications has been initiated through cooperation between ATI and the Kluwer Academic Publishers. The first volume was Advances in Engineering Data Handling-Case Studies.

Author : Anonim
Publisher : Unknown
Page : 822 pages
File Size : 44,8 Mb
Release : 1990
Category : High technology
ISBN : UCAL:B4310898

Get Book

The International Journal, Advanced Manufacturing Technology by Anonim Pdf

Author : Michel Grave,Yvon Le Lous,W.Terry Hewitt
Publisher : Springer Science & Business Media
Page : 222 pages
File Size : 45,6 Mb
Release : 2012-12-06
Category : Computers
ISBN : 9783642779022

Get Book

Visualization in Scientific Computing by Michel Grave,Yvon Le Lous,W.Terry Hewitt Pdf

Visualization in scientific computing is getting more and more attention from many people. Especially in relation with the fast increase of com puting power, graphic tools are required in many cases for interpreting and presenting the results of various simulations, or for analyzing physical phenomena. The Eurographics Working Group on Visualization in Scientific Com puting has therefore organized a first workshop at Electricite de France (Clamart) in cooperation with ONERA (Chatillon). A wide range of pa pers were selected in order to cover most of the topics of interest for the members of the group, for this first edition, and 26 of them were presented in two days. Subsequently 18 papers were selected for this volume. 1'he presentations were organized in eight small sessions, in addition to discussions in small subgroups. The first two sessions were dedicated to the specific needs for visualization in computational sciences: the need for graphics support in large computing centres and high performance net works, needs of research and education in universities and academic cen tres, and the need for effective and efficient ways of integrating numerical computations or experimental data and graphics. Three of those papers are in Part I of this book. The third session discussed the importance and difficulties of using stan dards in visualization software, and was related to the fourth session where some reference models and distributed graphics systems were discussed. Part II has five papers from these sessions.

Author : Anonim
Publisher : Unknown
Page : 1126 pages
File Size : 40,8 Mb
Release : 1987
Category : Aeronautics
ISBN : UIUC:30112075701596

Get Book

Scientific and Technical Aerospace Reports by Anonim Pdf

Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Author : Peter R. Bono,Ivan Herman
Publisher : Springer Science & Business Media
Page : 314 pages
File Size : 52,8 Mb
Release : 2012-12-06
Category : Computers
ISBN : 9783642729300

Get Book

GKS Theory and Practice by Peter R. Bono,Ivan Herman Pdf

Eurographics, the European Association for Computer Graphics, has always been an important forum for discussions and presentation of results concerning the first ISO Graphical Standard, GKS (the Graphical Kernel System) and later of its three-dimensional extension, GKS-3D. This book is a collection of those articles which have appeared within the framework of Eurographics in the past 5 years, and which still contain, even after several years, valid and interesting results concerning the problems arising in connection with GKS. Some of these papers help the reader to gain a deeper understanding of the standard; others deal with general implementation problems, and finally there are some presentations of specific algorithms usable also for a GKS or GKS-3D implementation. The book may be of a particular interest to those specialists who intend to implement a GKS package or some similar graphics subsystem and who can therefore make direct use of the experiences reflected in this collection. The book should also be a valuable supplement in university courses concerned with teaching the principles of implementing device-independent computer graphics.

Author : Jose L. Encarnacao,Rolf Lindner,Ernst G. Schlechtendahl
Publisher : Springer Science & Business Media
Page : 439 pages
File Size : 46,8 Mb
Release : 2012-12-06
Category : Computers
ISBN : 9783642840548

Get Book

Computer Aided Design by Jose L. Encarnacao,Rolf Lindner,Ernst G. Schlechtendahl Pdf

2 e This book describes principles, methods and tools that are common to computer applications for design tasks. CAD is considered in this book as a discipline that provides the required know-how in computer hardware and software, in systems analysis and in engineering methodology for specifying, designing, implementing, introducing, and using computer based systems for design purposes. The first chapter gives an impression of the book as a whole, and following chapters deal with the history and the components of CAD, the process aspect of CAD, CAD architecture, graphical devices and systems, CAD engineering methods, CAD data transfer, and application examples. The flood of new developments in the field and the success of the first edition of this book have led the authors to prepare this completely revised, updated and extended second edition. Extensive new material is included on computer graphics, implementation methodology and CAD data transfer; the material on graphics standards is updated. The book is aimed primarily at engineers who design or install CAD systems. It is also intended for students who seek a broad fundamental background in CAD.