Raspberry Pi Iot In C 3rd Edition

Author : Harry Fairhead
Publisher : I/O Press
Page : 0 pages
File Size : 50,8 Mb
Release : 2024-01-09
Category : Computers
ISBN : 1871962846

Get Book

Raspberry Pi IoT In C, 3rd Edition by Harry Fairhead Pdf

Reviews of the previous edition: "A complete explanation that makes it straightforward to interface I/O options to the Pi. Good examples are easy to follow and well explained - starting with "Hello World" and then walks through the various interface options available with GPIO. I highly recommend this to anyone using the Pi for any embedded system application requiring various types of interfaces." "This is the book to read to get deep into Raspberry IoT. Programming examples are provided. Great book!" The Raspberry Pi makes an ideal match for the Internet of Things. But to put it to good use in IoT you need two areas of expertise, electronics and programming and, because of the way hardware and software engineering tend to occupy separate niches, you may need help with combining the two which is the role of this book. This 3rd Edition was prompted by the arrival of the Pi 5. Unfortunately, as the Pi 5 uses the new RP1 chip to implement its peripherals, it is incompatible with all of the IoT libraries that work directly with the hardware. As a result it is excluded from much of this book. A whole chapter is, however, devoted to getting started with an IoT project with the Pi 5 and it is also covered in chapters on the Linux GPIO driver and on the use of the Pi's serial ports and in a chapter, which describes how to access the Pi 5's registers directly. What is more important than the Pi 5 from the point of view of IoT is the Pi Zero 2W, which is a much faster, quad-core, version of the Pi Zero W making it an excellent choice for IoT projects. It is covered for the first time in this edition. Another reason for a new edition is to update its programs to the new versions of Pi OS, Bookworm and Bullseye. Finally, a major change is that VS Code is now the book's IDE of choice and to make it easy to use as a remote development environment with all versions of Pi from Pi Zero to Pi 5, a set of custom VS Code tasks are supplied, which are downloadable as well as included in the book. The main idea in this book is to work directly with the hardware using the Raspberry Pi's GPIO (General Purpose Input Output) to connect with off-the-shelf sensors. After reading it you will be in a better position to tackle interfacing anything-with-anything without the need for custom drivers and prebuilt hardware modules. Harry Fairhead has worked with microprocessors and electronics for many years and is an enthusiastic proponent of the IoT. C is his programming language of choice and he has written several books on programming the Raspberry Pi and other devices in an IOT context, including Raspberry Pi IoT in C With Linux Drivers, Second Edition, Programming the ESP32 in MicroPython and Fundamental C: Getting Closer To The Machine. Currently, his most popular title is Programming the Raspberry Pi Pico/W in C.

Author : Harry Fairhead
Publisher : Unknown
Page : 412 pages
File Size : 48,5 Mb
Release : 2020-10-03
Category : Computers
ISBN : 1871962633

Get Book

Raspberry Pi IoT In C by Harry Fairhead Pdf

The Raspberry Pi makes an ideal match for the Internet of Things. But to put it to good use in IoT you need two areas of expertise, electronics and programming and, because of the way hardware and software engineering tend to occupy separate niches, you may need help with combining the two. This book teaches you to think like an IoT programmer. In Raspberry Pi IoT in C you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using the C programming language. The main reason for choosing C is speed, a crucial factor when you are writing programs to communicate with the outside world. If you are familiar with another programming language, C shouldn't be hard to pick up. This Second Edition has been brought up-to-date and focuses mainly on the Pi 4 and the Pi Zero. There is new material on the recently introduced GPIO character driver and using the Pi 4's additional ports and scheduling. Although NetBeans is used to develop programs, VS Code is now considered an alternative remote development environment and all the book's code, which is available for download, has been tested with VS Code. The main idea in this book is to not simply install a driver, but to work directly with the hardware using the Raspberry Pi's GPIO (General Purpose Input Output) to connect with off-the-shelf sensors. It explains how to use its standard output with custom protocols, including an in-depth exposition of the 1-wire bus. You will also discover how to put the Internet into the IoT using sockets. After reading this book you will be in a better position to tackle interfacing anything-with-anything without the need for custom drivers and prebuilt hardware modules. Harry Fairhead has worked with microprocessors and electronics in general for many years and is an enthusiastic proponent of the IoT. As well as being the Editor of IoT-Programmer.com, he is a regular contributor to I-Programmer.info, where he covers all aspects of hardware. His other recent books include Applying C For The IoT With Linux as well as Fundamental C: Getting Closer To The Machine and Micro: bit IoT in C.

Author : Harry Fairhead
Publisher : I/O Press
Page : 0 pages
File Size : 43,6 Mb
Release : 2024-01-27
Category : Computers
ISBN : 1871962854

Get Book

Raspberry Pi IoT In C Using Linux Drivers, 2nd Edition by Harry Fairhead Pdf

The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system is Linux based and Linux drivers are available for many off-the-shelf IoT devices. These provide a very easy-to-use, high-level way of working. The problem that this book solves is that there is very little documentation to help you get started. In it Harry Fairhead explains the principles so that you can tackle new devices and he also guides you through using external hardware via standard Linux drivers. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using the C programming language. This second edition was prompted by the advent of the Pi 5, welcomed as the fastest member of the Raspberry Pi family. What came as a shock is that, from the point of view of IoT, it is incompatible with all other Raspberry Pis due to the use of a custom chip. Luckily, although the Pi 5 cannot work with the standard IoT libraries it does behave in the same way under Linux drivers and so this new book does include the Pi 5 on an equal footing. Coverage also includes the Pi Zero 2W, which has a quad-core chip making it more capable than both the original Pi Zero and the WiFi-enabled Pi ZeroW. After a quick tour of the Raspberry Pi ecosystem, Visual Studio Code (VS Code) and how it can be used to develop remotely, is introduced. The first IoT program anyone writes is "blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line it uses the Linux LED driver - no hardware and no fuss. The GPIO isn't left out, however, as the next three chapters focus on its use via the new GPIO character driver. A key component in any look at Linux and its relationship to hardware is the device tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at the DHT22 temperature and humidity driver. After a brief detour into some basic electronics, we look at Pulse Width Modulation supported via a driver rather than needing to be implemented using the GPIO. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, hwmon, and Industrial I/O, IIO. We also look at the 1-Wire bus. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. Harry Fairhead has worked with microprocessors and electronics in general for many years and is an enthusiastic proponent of the IoT. C is his programming language of choice and he has written several books on programming the Raspberry Pi and other devices in an IOT context, including Raspberry Pi IoT In C, 3rd Edition, Programming the Raspberry Pi Pico/W in C, 2nd Edition, Programming the ESP32 in MicroPython and Fundamental C: Getting Closer To The Machine.

Author : Mike James,Harry Fairhead
Publisher : I/O Press
Page : 0 pages
File Size : 48,5 Mb
Release : 2024-01-23
Category : Computers
ISBN : 1871962862

Get Book

Raspberry Pi IoT In Python Using Linux Drivers, 2nd Edition by Mike James,Harry Fairhead Pdf

The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming, and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system, is Linux- based and Linux drivers are available for many off-the-shelf IoT devices. Using Linux drivers saves the effort of implementing low-level code and has the advantage of working the same on all versions of the Pi, including the recently launched Pi 5 which isn't hardware compatible with earlier versions. This Second Edition has been updated to cover the Pi 5 and also the Pi Zero 2W, which is an ideal candidate for use in IoT projects. It has also been updated to use the latest versions of Pi OS, Bullseye and Bookworm. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using Python and VS Code. The first IoT program anyone writes is "Blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line driver, it uses the Linux LED driver. The GPIO isn't left out, however, as the next three chapters focus on its use via the GPIO character driver, which replaces the old, but very common, sysfs GPIO driver. This is the way to do modern GPIO. A key component in any look at Linux and its relationship to hardware is the relatively new Device Tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at several devices, including the DHT22 temperature and humidity sensor. After a brief detour into some basic electronics, we see how Pulse Width Modulation is supported via a driver. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, hwmon, and Industrial I/O, IIO. The 1-Wire bus is also covered in detail. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. Harry Fairhead's other books include Applying C For The IoT With Linux; Programming the Raspberry Pi Pico/W, 2nd Ed, Raspberry Pi IoT in C, 3rd Ed, Raspberry Pi IoT in C Using Linux Drivers, 2nd Ed, Programming the Raspberry Pi Pico/W, 2nd Ed and Programming the ESP32 in MicroPython. Mike James is the author of the Programmer's Python: Something Completely Different series of books and several other programming and computer science titles in the I Programmer Library.

Author : Harry Fairhead
Publisher : Unknown
Page : 280 pages
File Size : 54,7 Mb
Release : 2021-02-08
Category : Computers
ISBN : 1871962641

Get Book

Raspberry Pi IoT In C Using Linux Drivers by Harry Fairhead Pdf

The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system is Linux based and Linux drivers are available for many off-the-shelf IoT devices. These provide a very easy-to-use, high-level way of working. The problem that this book solves is that there is very little documentation to help you get started. In it Harry Fairhead explains the principles so that you can tackle new devices and he also guides you through of using external hardware via standard Linux drivers. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using the C programming language. The main reason for choosing C is speed, a crucial factor when you are writing programs to communicate with the outside world and if you are familiar with another programming language, C shouldn't be hard to pick up. After a quick tour of the Raspberry Pi ecosystem, Visual Studio Code (VS Code) and how it can be used to develop remotely, is introduced. The first IoT program anyone writes is "blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line it uses the Linux LED driver - no hardware and no fuss. The GPIO isn't left out, however, as the next three chapters focus on its use via the new GPIO character driver, which replaces the old and very common sysfs GPIO driver. This is the way to do modern GPIO. A key component in any look at Linux and its relationship to hardware is the relatively new Device Tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at the DHT22 temperature and humidity driver. After a brief detour into some basic electronics, we look at Pulse Width Modulation supported via a driver rather than needing to be implemented using the GPIO. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, Hwmon, and Industrial I/O, IIO. The third standard bus, although generally not supported in hardware is the 1-Wire bus. This is covered in detail and even includes an introduction to using Netlink, which uses the sockets API to send messages to and from the kernel to access the driver. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. Harry Fairhead has worked with microprocessors, and electronics in general, for many years and is an enthusiastic proponent of the IoT. He is the author of Raspberry Pi IoT in C, which has recently been republished in its second edition, updated for Raspberry Pi 4 and co-author of Raspberry Pi IoT in Python Using GPIO Zero. His other recent books include Micro: bit IoT in C, Fundamental C: Getting Closer To The Machine and Applying C For The IoT With Linux.

Author : Mike James,Harry Fairhead
Publisher : I/O Press
Page : 276 pages
File Size : 45,9 Mb
Release : 2021-03-14
Category : Electronic
ISBN : 187196265X

Get Book

Raspberry Pi IoT In Python Using Linux Drivers by Mike James,Harry Fairhead Pdf

The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming, and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system, is Linux- based and Linux drivers are available for many off-the-shelf IoT devices. These provide a very easy-to-use, high-level, way of working. The problem that this book solves is that there is very little documentation to help you get started. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using Python. Python is an excellent language for learning about the IoT or physical computing. It might not be as fast as C, but it is much easier to use for complex data processing. The emphasis in this book is on understanding how things work so that you can apply your new knowledge to your own projects. You can use any Python development system that you know, but the programs in the book have been developed using Visual Studio Code and its remote development facilities. The first IoT program anyone writes is "Blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line, it uses the Linux LED driver - no hardware and no fuss. The GPIO isn't left out, however, as the next three chapters focus on its use via the new GPIO character driver, which replaces the old and very common sysfs GPIO driver. This is the way to do modern GPIO. A key component in any look at Linux and its relationship to hardware is the relatively new Device Tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at several devices, including the DHT22 temperature and humidity sensor. After a brief detour into some basic electronics, we see how Pulse Width Modulation is supported via a driver. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, Hwmon, and Industrial I/O, IIO. The third standard bus, although generally not supported in hardware, is the 1-Wire bus. This is covered in detail and even includes an introduction to using Netlink, which uses the sockets API to send messages to and from the kernel to access the driver. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. This is the second title jointly authored by Harry Fairhead and Mike James and can be seen as the alternative approach to that outlined in Raspberry Pi IoT In Python Using GPIO Zero. For both books, Harry brings his expertise in electronics and the IoT and Mike contributes the Python code. Harry Fairhead is the author of other IoT-related titles including Raspberry Pi IoT in C, Second Edition; Micro: bit IoT in C, Second Edition; Applying C For The IoT With Linux and Fundamental C: Getting Closer To The Machine. Mike James is the author of Programmer's Python: Everything is an Object and other programming and computer science titles in the I Programmer Library.

Author : Mike James,Harry Fairhead
Publisher : Unknown
Page : 242 pages
File Size : 53,5 Mb
Release : 2020-11-21
Category : Electronic
ISBN : 1871962668

Get Book

Raspberry Pi IoT In Python Using GPIO Zero by Mike James,Harry Fairhead Pdf

The Raspberry Pi makes an ideal match for the Internet of Things. But to put it to good use in IoT you need two areas of expertise, electronics and programming and because of the way hardware and software engineering tend to occupy separate niches, you may need help with combining the two. Python is an excellent language with which to learn about the IoT or physical computing. It might not be as fast as C, but it is much easier to use for complex data processing. One reason for Python's popularity is its wealth of supporting libraries and there are several for interfacing hardware. The GPIO Zero library is the official way to use Python with the GPIO and other devices and this book looks at how to use it to interface to fundamental IoT devices - from LEDs and buzzers to servos and stepper motors and several off-the-shelf Raspberry Pi add-ons. Importantly, it explains how it works so that you can extend it to custom devices. Studying GPIO Zero is also a great way to improve your Python and this book teaches you to think like an IoT programmer. After reading it, you will be in a better position to tackle interfacing anything-with-anything without the need for custom drivers and prebuilt hardware modules. The emphasis in this book on understanding how things work and using this knowledge to create new devices and integrate them into GPIO Zero. You can use any Python development system that you know, but the programs in the book have been developed using Visual Studio Code and its remote development facilities. All the code is available on the book's web page along with everything you need to get started. Harry Fairhead has worked with microprocessors, and electronics in general, for many years and is an enthusiastic proponent of the IoT. He is the author of Raspberry Pi IoT in C, which has recently been republished in its second edition, updated for Raspberry Pi 4. His other recent books include Applying C For The IoT With Linux and Fundamental C: Getting Closer To The Machine. Mike James is the author of Programmer's Python: Everything is an Object and other programming and computer science titles in the I Programmer Library. His programming career spans several generations of computer technology, but he keeps his skills completely up to date and has a PhD in Computer Science.

Author : John C. Shovic
Publisher : Apress
Page : 253 pages
File Size : 49,8 Mb
Release : 2016-08-12
Category : Computers
ISBN : 9781484213773

Get Book

Raspberry Pi IoT Projects by John C. Shovic Pdf

Build your own Internet of Things (IoT) projects for prototyping and proof-of-concept purposes. This book contains the tools needed to build a prototype of your design, sense the environment, communicate with the Internet (over the Internet and Machine to Machine communications) and display the results. Raspberry Pi IoT Projects provides several IoT projects and designs are shown from the start to the finish including an IoT Heartbeat Monitor, an IoT Swarm, IoT Solar Powered Weather Station, an IoT iBeacon Application and a RFID (Radio Frequency Identification) IoT Inventory Tracking System. The software is presented as reusable libraries, primarily in Python and C with full source code available. Raspberry Pi IoT Projects: Prototyping Experiments for Makers is also a valuable learning resource for classrooms and learning labs. What You'll Learn build IOT projects with the Raspberry Pi Talk to sensors with the Raspberry Pi Use iBeacons with the IOT Raspberry Pi Communicate your IOT data to the Internet Build security into your IOT device Who This Book Is For Primary audience are those with some technical background, but not necessarily engineers. It will also appeal to technical people wanting to learn about the Raspberry Pi in a project-oriented method.

Author : Mike James,Harry Fairhead
Publisher : I/O Press
Page : 0 pages
File Size : 51,5 Mb
Release : 2024-02-17
Category : Computers
ISBN : 1871962870

Get Book

Raspberry Pi IoT In Python Using GPIO Zero, 2nd Edition by Mike James,Harry Fairhead Pdf

The Raspberry Pi makes an ideal match for the Internet of Things. But to put it to good use in IoT you need two areas of expertise, electronics and programming and because of the way hardware and software engineering tend to occupy separate niches, you may need help with combining the two which is what this book sets out to do. Python is an excellent language for learning about physical computing. It might not be as fast as C, but it is much easier to use for complex data processing. One reason for Python's popularity is its wealth of supporting libraries and there are several for interfacing hardware. The GPIO Zero library is the official way to use Python with the GPIO and other devices and this book looks at how to use it to interface to fundamental IoT devices - from LEDs and buzzers to servos and stepper motors and several off-the-shelf Raspberry Pi add-ons. This revised second edition had been expanded to cover all the current Raspberry Pis including the latest, the Pi 5, and the Pi Zero 2W which, with its WiFi capability and being a quad-core device, is an ideal device for IoT projects. It has also been updated to cover the latest version of the GPIO Zero library, which is both the library recommended by Raspberry Pi and the only one that works with the Pi 5. The emphasis in this book is about using and understanding the hardware and GPIO Zero. It not only shows you how to "follow the beaten track", but how to create your own tracks. While it isn't a project book, many of the code examples described are part way to projects and all of the devices and techniques described can be used to create practical projects. Similarly while it doesn't teach you the whole of Python, it does bring you up to speed in the aspects of the language needed for interfacing with hardware. Harry Fairhead has worked with microprocessors, and electronics in general, for many years and is an enthusiastic proponent of the IoT. He is the author of Raspberry Pi IoT in C, which has recently been republished in its third edition, and Raspberry Pi IoT in C Using Linux Drivers, now in its second edition. Mike James is the co-author Raspberry Pi IoT in Python Using Linux Drivers, Second Edition. He is also the author of the Programmer's Python: Something Completely Different series of books.

Author : Shawn Wallace. Matt Richardson
Publisher : Unknown
Page : 128 pages
File Size : 50,5 Mb
Release : 2016
Category : Electronic
ISBN : 1680452452

Get Book

Getting Started With Raspberry Pi, 3rd Edition by Shawn Wallace. Matt Richardson Pdf

Author : Dr. Steven Lawrence Fernandes
Publisher : Packt Publishing Ltd
Page : 542 pages
File Size : 42,6 Mb
Release : 2018-04-30
Category : Computers
ISBN : 9781788626989

Get Book

Raspberry Pi 3 Cookbook for Python Programmers by Dr. Steven Lawrence Fernandes Pdf

A recipe-based guide to programming your Raspberry Pi 3 using Python Key Features Leverage the power of Raspberry Pi 3 using Python programming Create 3D games, build neural network modules, and interface with your own circuits Packed with clear, step-by-step recipes to walk you through the capabilities of Raspberry Pi Book Description Raspberry Pi 3 Cookbook for Python Programmers – Third Edition begins by guiding you through setting up Raspberry Pi 3, performing tasks using Python 3.6, and introducing the first steps to interface with electronics. As you work through each chapter, you will build your skills and apply them as you progress. You will learn how to build text classifiers, predict sentiments in words, develop applications using the popular Tkinter library, and create games by controlling graphics on your screen. You will harness the power of a built in graphics processor using Pi3D to generate your own high-quality 3D graphics and environments. You will understand how to connect Raspberry Pi’s hardware pins directly to control electronics, from switching on LEDs and responding to push buttons to driving motors and servos. Get to grips with monitoring sensors to gather real-life data, using it to control other devices, and viewing the results over the internet. You will apply what you have learned by creating your own Pi-Rover or Pi-Hexipod robots. You will also learn about sentiment analysis, face recognition techniques, and building neural network modules for optical character recognition. Finally, you will learn to build movie recommendations system on Raspberry Pi 3. What you will learn Learn to set up and run Raspberry Pi 3 Build text classifiers and perform automation using Python Predict sentiments in words and create games and graphics Detect edges and contours in images Build human face detection and recognition system Use Python to drive hardware Sense and display real-world data Build a neural network module for optical character recognition Build movie recommendations system Who this book is for This book is for anyone who wants to master the skills of Python programming using Raspberry Pi 3. Prior knowledge of Python will be an added advantage.

Author : James R. Strickland
Publisher : Apress
Page : 444 pages
File Size : 41,7 Mb
Release : 2018-06-19
Category : Computers
ISBN : 9781484234143

Get Book

Raspberry Pi for Arduino Users by James R. Strickland Pdf

Leverage your Arduino skills in the Raspberry Pi world and see how to cross the two platforms into sophisticated programs. The Arduino and Raspberry Pi communities overlap more than you might think. Arduinos can be expanded to have network capabilities with a variety of “shields,” all of which increase the cost and complexity of the system. By contrast, Raspberry Pis all run Linux, which is a very network-competent platform. The newest Pi, the Raspberry Pi Zero W, is WiFi and Bluetooth capable, and costs around $10 U.S. For network enabled gadgets, it makes far more sense to cross to the Raspberry PI platform, if only someone would make it easy to do. That's what this book is about. You'll learn some survival level Linux system administration, so you know how to set the machine up and how to establish at least minimal security for your gadget. You''ll set up and learn the Geany IDE on your Pi, which is fairly similar to the Arduino IDE. Where the two platforms overlap the most is the GPIO system. You'll see that several projects use and explain the WiringPi system. This is is deliberately similar to the Arduino's 'Wiring' functionality, which is how sketches interact with GPIO pins. You'll learn the differences between the GPIO pins of the two devices, and how the Pi has some limitations on those pins that the Arduino does not. As a final project, in an effort to escape some of those limitations, you'll attach an AtMEGA 328P to the Raspberry Pi and configure it as a real, 8MHz Arduino with the Arduino IDE running on the Pi, and learn how to have the two platforms communicate, giving you the best of both worlds. What You'll Learn Establish security with Linux system administration Set up the Apache webserver Write CGI programs so other computers can connect to your Pi and pull data in from it. Use C/C++ from Arduino sketches to write programs for the Pi Who This Book Is For The Arduino user who's been through all the tutorials and is comfortable writing sketches and connecting hardware to their Arduino.

Author : Blaize Stewart
Publisher : "O'Reilly Media, Inc."
Page : 340 pages
File Size : 42,6 Mb
Release : 2024-01-09
Category : Computers
ISBN : 9781098142827

Get Book

Architecting IoT Solutions on Azure by Blaize Stewart Pdf

How can you make sense of the complex IoT landscape? With dozens of components ranging from devices to metadata about the devices, it's easy to get lost among the possibilities. But it's not impossible if you have the right guide to help you navigate all the complexities. This practical book shows developers, architects, and IT managers how to build IoT solutions on Azure. Author Blaize Stewart presents a comprehensive view of the IoT landscape. You'll learn about devices, device management at scale, and the tools Azure provides for building globally distributed systems. You'll also explore ways to organize data by choosing the appropriate dataflow and data storage technologies. The final chapters examine data consumption and solutions for delivering data to consumers with Azure. Get the architectural guidance you need to create holistic solutions with devices, data, and everything in between. This book helps you: Meet the demands of an IoT solution with Azure-provided functionality Use Azure to create complete scalable and secure IoT systems Understand how to articulate IoT architecture and solutions Guide conversations around common problems that IoT applications solve Select the appropriate technologies in the Azure space to build IoT applications

Author : Simon Monk
Publisher : McGraw Hill Professional
Page : 193 pages
File Size : 42,5 Mb
Release : 2021-06-04
Category : Technology & Engineering
ISBN : 9781264257362

Get Book

Programming the Raspberry Pi, Third Edition: Getting Started with Python by Simon Monk Pdf

An up-to-date guide to creating your own fun and useful Raspberry PiTM programs This fully updated guide shows how to create inventive programs and fun games on your powerful Raspberry Pi—with no programming experience required. Programming the Raspberry PiTM: Getting Started with Python, Third Edition addresses physical changes and new setup procedures as well as OS updates to the current version 4. You will discover how to configure hardware and software, write Python scripts, create user-friendly GUIs, and control external electronics. Step-by-step projects include a digital clock prototype and a fully functioning Raspberry Pi robot. Configure your Raspberry Pi and explore its features Start writing and debugging Python programs Use strings, lists, functions, and dictionaries Work with modules, classes, and methods Apply object-oriented development methods Create user-friendly games using Pygame Build intuitive user interfaces with guizero Interface with hardware using the gpiozero library Attach external electronics through the GPIO port Add powerful Web features to your projects

Author : Harry Fairhead
Publisher : I/O Press
Page : 268 pages
File Size : 48,7 Mb
Release : 2021-02-26
Category : Electronic
ISBN : 1871962676

Get Book

Micro by Harry Fairhead Pdf

The BBC micro: bit is capable of taking on a variety of roles including that of a powerful IoT device. In order to gain full access to its features and to external devices, however, you need to use C which delivers the speed which is crucial when you are writing programs to communicate with the outside world. The new V2 version of the micro: bit is fully covered in Micro: bit IoT in C, Second Edition, which now uses the highly popular VS Code for offline development. It covers how to get started the easy way by providing downloadable templates for both V1 and V2 of the micro: bit. Having started with the traditional "Blinky" program, the equivalent of "Hello World" for hardware, we are ready to discover how to control the micro: bit's I/O lines, exploring the basis of using the GPIO. For speed, however, we need to work directly with the raw hardware and also master memory mapping, pulse width modulation and other more sophisticated bus types. From here we can start connecting sensors using first the I2C bus, then by implementing a custom protocol for a one-wire bus, and eventually adding eight channels of 12-bit A-to-D with the SPI bus, which involves overcoming some subtle difficulties. We then look at serial connections, one of the oldest ways of connecting devices, but still very useful. The micro: bit lacks WiFi connectivity but using a low-cost device we enable a connection to the Internet via its serial port which allows it to become a server. Next we look at the micro: bit's LED display. This may only be 5x5, but it is very versatile, especially when you use pulse width modulation to vary the brightness level, something we demonstrate in a classic game, written of course in C. The book rounds out with a new chapter on the micro: bit's radio and the V2's sound capabilities. Harry Fairhead has worked with microprocessors, and electronics in general, for many years and is an enthusiastic proponent of the IoT. He is the author of Raspberry Pi IoT in C, which has recently been republished in its second edition, updated for Raspberry Pi 4, and of Raspberry Pi IoT In C With Linux Drivers. He has also co-authored Python versions of these books - Raspberry Pi IoT in Python Using GPIO Zero and Raspberry Pi IoT In Python With Linux Drivers. His own language of choice is C and he has also written Fundamental C: Getting Closer To The Machine and Applying C For The IoT With Linux.