Risk Management Series Designing For Earthquakes A Manual For Architects
Risk Management Series Designing For Earthquakes A Manual For Architects Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of Risk Management Series Designing For Earthquakes A Manual For Architects book. This book definitely worth reading, it is an incredibly well-written.
Risk Management Series: Designing for Earthquakes - A Manual for Architects by Federal Emergency Agency,U. S. Department Security Pdf
Earthquakes in the United States are regional in their occurrence and while California is famous for its earthquake other states, such as Texas, have much less concern for the threat of temblors. However, architectural practice is becoming increasingly national and global, and the architect in Texas may find that the next project is in California. Thus it has become necessary for the professional architect to have some knowledge of the earthquake problem and how design seeks to control it. Designing for Earthquakes: a Manual for Architects is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know. Because of its non-technical approach this publication will also be useful to anyone who has an interest and concern for the seismic protection of buildings, including facility managers, building owners and tenants, building committee participants, emergency service personnel and building officials. Engineers and engineering students will also gain from this discussion of seismic design from an architectural viewpoint. The principles discussed are applicable to a wide range of building types, both new and existing. The focus is on buildings that are designed by a team that includes architects, engineers and other consultants.
Designing for Earthquakes by Federal Emergency Management Agency Pdf
This full color manual is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know.
Encompassing theory and field experience, this book covers all the main subject areas in earthquake risk reduction, ranging from geology, seismology, structural and soil dynamics to hazard and risk assessment, risk management and planning, engineering and the architectural design of new structures and equipment. Earthquake Risk Reduction outlines individual national weaknesses that contribute to earthquake risk to people and property; calculates the seismic response of soils and structures, using the structural continuum 'Subsoil - Substructure - Superstructure - Non-structure'; evaluates the effectiveness of given designs and construction procedures for reducing casualties and financial losses; provides guidance on the key issue of choice of structural form; presents earthquake resistant designs methods for the four main structural materials - steel, concrete, reinforced masonry and timber - as well as for services equipment, plant and non-structural architectural components; contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment. Compiled from the author's extensive professional experience in earthquake engineering, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake risk reduction. This book will prove an invaluable reference and guiding tool to practicing civil and structural engineers and architects, researchers and postgraduate students in seismology, local governments and risk management officials.
Damping Technologies for Tall Buildings by Alberto Lago,Dario Trabucco,Antony Wood Pdf
Damping Technologies for Tall Buildings provides practical advice on the selection, design, installation and testing of damping systems. Richly illustrated with images and schematics, this book presents expert commentary on different damping systems, giving readers a way to accurately compare between different device categories and gain and understand the advantages and disadvantages of each. In addition, the book covers their economical and sustainability implications. Case studies are included to provide a direct understanding on the possible applications of each device category. Provides an expert guide on the selection and deployment of the various types of damping technologies Drawn from extensive contributions from international experts and research projects that represent the current state-of-the-art and design in damping technologies Includes 25+ real case studies collected with very detailed information on damping design, installation, testing and other building implications
Eurocode-Compliant Seismic Analysis and Design of R/C Buildings by Ioannis Avramidis,A. Athanatopoulou,Konstantinos Morfidis,Anastasios Sextos,Agathoklis Giaralis Pdf
This book aims to serve as an essential reference to facilitate civil engineers involved in the design of new conventional (ordinary) reinforced concrete (R/C) buildings regulatedby the current European EC8 (EN 1998-1:2004) and EC2 (EN 1992-1-1:2004) codesof practice. The book provides unique step-by-step flowcharts which take the readerthrough all the required operations, calculations, and verification checks prescribed bythe EC8 provisions. These flowcharts are complemented by comprehensive discussionsand practical explanatory comments on critical aspects of the EC8 code-regulatedprocedure for the earthquake resistant design of R/C buildings. Further, detailedanalysis and design examples of typical multi-storey three-dimensional R/C buildingsare included to illustrate the required steps for achieving designs of real-life structures which comply with the current EC8 provisions. These examples can be readily used as verification tutorials to check the reliability of custom-made computer programs and of commercial Finite Element software developed/used for the design of earthquakeresistant R/C buildings complying with the EC8 (EN 1998-1:2004) code.This book will be of interest to practitioners working in consulting and designingengineering companies and to advanced undergraduate and postgraduate level civilengineering students attending courses and curricula in the earthquake resistant designof structures and/or undertaking pertinent design projects.
Risk Management Series: Safe Rooms and Shelters - Protecting People Agains Terrorist Attacks by Federal Emergency Agency,U. S. Department Security Pdf
This manual is intended to provide guidance for engineers, architects, building officials, and property owners to design shelters and safe rooms in buildings. It presents information about the design and construction of shelters in the work place, home, or community building that will provide protection in response to manmade hazards. The information contained herein will assist in the planning and design of shelters that may be constructed outside or within dwellings or public buildings. These safe rooms will protect occupants from a variety of hazards, including debris impact, accidental or intentional explosive detonation, and the accidental or intentional release of a toxic substance into the air. Safe rooms may also be designed to protect individuals from assaults and attempted kidnapping, which requires design features to resist forced entry and ballistic impact. This covers a range of protective options, from low-cost expedient protection (what is commonly referred to as sheltering-in-place) to safe rooms ventilated and pressurized with air purified by ultra-high-efficiency filters. These safe rooms protect against toxic gases, vapors, and aerosols. The contents of this manual supplement the information provided in FEMA 361, Design and Construction Guidance for Community Shelters and FEMA 320, Taking Shelter From the Storm: Building a Safe Room Inside Your House. In conjunction with FEMA 361 and FEMA 320, this publication can be used for the protection of shelters against natural disasters. This guidance focuses on safe rooms as standby systems, ones that do not provide protection on a continuous basis. To employ a standby system requires warning based on knowledge that a hazardous condition exists or is imminent. Protection is initiated as a result of warnings from civil authorities about a release of hazardous materials, visible or audible indications of a release (e.g., explosion or fire), the odor of a chemical agent, or observed symptoms of exposure in people. Although there are automatic detectors for chemical agents, such detectors are expensive and limited in the number of agents that can be reliably detected. Furthermore, at this point in time, these detectors take too long to identify the agent to be useful in making decisions in response to an attack. Similarly, an explosive vehicle or suicide bomber attack rarely provides advance warning; therefore, the shelter is most likely to be used after the fact to protect occupants until it is safe to evacuate the building. Two different types of shelters may be considered for emergency use, standalone shelters and internal shelters. A standalone shelter is a separate building (i.e., not within or attached to any other building) that is designed and constructed to withstand the range of natural and manmade hazards. An internal shelter is a specially designed and constructed room or area within or attached to a larger building that is structurally independent of the larger building and is able to withstand the range of natural and manmade hazards. Both standalone and internal shelters are intended to provide emergency refuge for occupants of commercial office buildings, school buildings, hospitals, apartment buildings, and private homes from the hazards resulting from a wide variety of extreme events. The shelters may be used during natural disasters following the warning that an explosive device may be activated, the discovery of an explosive device, or until safe evacuation is established following the detonation of an explosive device or the release of a toxic substance via an intentional aerosol attack or an industrial accident. Standalone community shelters may be constructed in neighborhoods where existing homes lack shelters. Community shelters may be intended for use by the occupants of buildings they are constructed within or near, or they may be intended for use by the residents of surrounding or nearby neighborhoods or designated areas.
The most comprehensive compilation of seismic safety concerns currently available. Implications of historic earthquakes on the built environment and new lessons learned from recent earthquakes are discussed. Emphasizes methods of design for the numerous hazards caused by architectural, non-structural elements of a building such as non-loadbearing walls, mechanical equipment and ductwork, furniture, etc. Additional coverage focuses on the latest developments in earthquake hazards reduction measures for advancing seismic safety goals; new data on the repair and retrofit of earthquake damaged buildings; identification of existing hazardous structures; and recovery aspects of post-earthquake reconstruction. Recommendations are made regarding the responsibilities in earthquake hazards mitigation programs, the design of earthquake-resistant buildings, professional liability and the evaluation and rehabilitation of older buildings.
Earthquake-Resistant Structures by Mohiuddin Ali Khan Pdf
Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering
Precast-concrete buildings in seismic areas by FIB – Féd. Int. du Béton Pdf
This document has a broad scope and is not focussed on design issues. Precast construction under seismic conditions is treated as a whole. The main principles of seismic design of different structural systems, their behavior and their construction techniques are presented through rules, construction steps and sequences, procedures, and details that should lead to precast structures built in seismic areas complying with the fundamental performance requirements of collapse prevention and life safety in major earthquakes and limited damage in more frequent earthquakes. The content of this document is largely limited to conventional precast construction and, although some information is provided on the well-known “PRESSS technology” (jointed ductile dry connections), this latter solution is not treated in detail in this document. The general overview, contained in this document, of alternative structural systems and connection solutions available to achieve desired performance levels, intends to provide engineers, architects, clients, and end-users (in general) with a better appreciation of the wide range of applications that modern precast concrete technology can have in various types of construction from industrial to commercial as well as residential. Lastly, the emphasis on practical aspects, from conceptual design to connection detailing, aims to help engineers to move away from the habit of blindly following prescriptive codes in their design, but instead go back to basic principles, in order to achieve a more robust understanding, and thus control, of the seismic behaviour of the structural system as a whole, as well as of its components and individual connections.
Seismic Design for Architects by Andrew Charleson Pdf
Seismic Design for Architects shows how structural requirements for seismic resistance can become an integral part of the design process. Structural integrity does not have to be at the expense of innovative, high standard design in seismically active zones. * By emphasizing design and discussing key concepts with accompanying visual material, architects are given the background knowledge and practical tools needed to deal with aspects of seismic design at all stages of the design process * Seismic codes from several continents are drawn upon to give a global context of seismic design * Extensively illustrated with diagrams and photographs * A non-mathematical approach focuses upon the principles and practice of seismic resistant design to enable readers to grasp the concepts and then readily apply them to their building designs Seismic Design for Architects is a comprehensive, practical reference work and text book for students of architecture, building science, architectural and civil engineering, and professional architects and structural engineers.
