Standards Methods And Solutions Of Metrology

Author : Luigi Cocco
Publisher : BoD – Books on Demand
Page : 108 pages
File Size : 41,8 Mb
Release : 2019-10-02
Category : Technology & Engineering
ISBN : 9781789844627

Get Book

Standards, Methods and Solutions of Metrology by Luigi Cocco Pdf

The goal of acceptable quality, cost, and time is a decisive challenge in every engineering development process. To be familiar with metrology requires choosing the best combination of techniques, standards, and tools to control a project from advanced simulations to final performance measurements and periodic inspections. This book contains a cluster of chapters from international academic authors who provide a meticulous way to discover the impacts of metrology in both theoretical and application fields. The approach is to discuss the key aspects of a selection of untraditional metrological topics, covering the analysis procedures and set of solutions obtained from experimental studies.

Author : Anil Akdogan
Publisher : BoD – Books on Demand
Page : 124 pages
File Size : 46,8 Mb
Release : 2018-08-01
Category : Technology & Engineering
ISBN : 9781789235951

Get Book

Metrology by Anil Akdogan Pdf

Metrology, the science of measurement, is crucial for many sciences and technological developments. Since metrology helps to improve many other sciences, the book reflects in general metrology and some special metrological approaches at different fields such as radiation and frequency measurements in detail. This book also focuses on technical testing and control applications in the industry. It also intends the fundamentals of metrology concerning the related standards and systems of units. In addition, the book considers the calibration of measurement instruments and measurement uncertainties as the basic requirements of the related quality standards.

Author : Raghavendra,,Krishnamurthy,
Publisher : OUP India
Page : 0 pages
File Size : 43,8 Mb
Release : 2013-05
Category : Technology & Engineering
ISBN : 0198085494

Get Book

Engineering Metrology and Measurements by Raghavendra,,Krishnamurthy, Pdf

Engineering Metrology and Measurements is a textbook designed for students of mechanical, production and allied disciplines to facilitate learning of various shop-floor measurement techniques and also understand the basics of mechanical measurements.

Author : Samir Mekid
Publisher : John Wiley & Sons
Page : 404 pages
File Size : 47,5 Mb
Release : 2021-12-02
Category : Technology & Engineering
ISBN : 9781119721710

Get Book

Metrology and Instrumentation by Samir Mekid Pdf

Metrology and Instrumentation: Practical Applications for Engineering and Manufacturing provides students and professionals with an accessible foundation in the metrology techniques, instruments, and governing standards used in mechanical engineering and manufacturing. The book opens with an overview of metrology units and scale, then moves on to explain topics such as sources of error, calibration systems, uncertainty, and dimensional, mechanical, and thermodynamic measurement systems. A chapter on tolerance stack-ups covers GD&T, ASME Y14.5-2018, and the ISO standard for general tolerances, while a chapter on digital measurements connects metrology to newer, Industry 4.0 applications.

Author : John Keenan Taylor,H. V. Oppermann
Publisher : Unknown
Page : 320 pages
File Size : 45,7 Mb
Release : 1986
Category : Calibration
ISBN : UOM:39015086492108

Get Book

Handbook for the Quality Assurance of Metrological Measurements by John Keenan Taylor,H. V. Oppermann Pdf

Author : A.E. Fridman
Publisher : Springer
Page : 214 pages
File Size : 45,5 Mb
Release : 2014-01-25
Category : Science
ISBN : 1489999752

Get Book

The Quality of Measurements by A.E. Fridman Pdf

This monograph and translation from the Russian describes in detail and comments on the fundamentals of metrology. The basic concepts of metrology, the principles of the International System of Units SI, the theory of measurement uncertainty, the new methodology of estimation of measurement accuracy on the basis of the uncertainty concept, as well as the methods for processing measurement results and estimating their uncertainty are discussed from the modern position. It is shown that the uncertainty concept is compatible with the classical theory of accuracy. The theory of random uncertainties is supplemented with their most general description on the basis of generalized normal distribution; the instrumental systematic errors are presented in connection with the methodology of normalization of the metrological characteristics of measuring instruments. The information about modern systems of traceability is given. All discussed theoretical principles and calculation methods are illustrated with examples.

Author : Semyon G. Rabinovich
Publisher : Springer
Page : 323 pages
File Size : 53,8 Mb
Release : 2017-09-05
Category : Technology & Engineering
ISBN : 9783319601250

Get Book

Evaluating Measurement Accuracy by Semyon G. Rabinovich Pdf

This book presents a systematic and comprehensive exposition of the theory of measurement accuracy and provides solutions that fill significant and long-standing gaps in the classical theory. It eliminates the shortcomings of the classical theory by including methods for estimating accuracy of single measurements, the most common type of measurement. The book also develops methods of reduction and enumeration for indirect measurements, which do not require Taylor series and produce a precise solution to this problem. It produces grounded methods and recommendations for summation of errors. The monograph also analyzes and critiques two foundation metrological documents, the International Vocabulary of Metrology (VIM) and the Guide to the Expression of Uncertainty in Measurement (GUM), and discusses directions for their revision. This new edition adds a step-by-step guide on how to evaluate measurement accuracy and recommendations on how to calculate systematic error of multiple measurements. There is also an extended section on the method of reduction, which provides an alternative to the least-square method and the method of enumeration. Many sections are also rewritten to improve the structure and usability of the material. The 3rd edition reflects the latest developments in metrology and offers new results, and it is designed to be accessible to readers at various levels and positions, including scientists, engineers, and undergraduate and graduate students. By presenting material from a practical perspective and offering solutions and recommendations for problems that arise in conducting real-life measurements, author Semyon Rabinovich offers an invaluable resource for scientists in any field.

Author : Sarah Hudson
Publisher : States Academic Press
Page : 254 pages
File Size : 44,7 Mb
Release : 2021-11-16
Category : Technology & Engineering
ISBN : 1639895205

Get Book

The Metrology Handbook by Sarah Hudson Pdf

Metrology is the scientific study of measurement that establishes a common understanding of units, which is crucial in linking human activities. The three overlapping activities of metrology are the definition, realization and traceability of the units of measurement. There are three basic sub-fields of metrology in which these activities are used. They are scientific or fundamental metrology, technical or industrial metrology, and legal metrology. Study of scientific metrology is focused on the units of measurement, the development of new measurement methods, the realisation of measurement standards, and the transfer of traceability from these standards to users in a society. Technical metrology studies are based on the application of measurement to manufacturing and other processes and their use in society. Legal metrology is based on the activities that result from statuatory requirements, measurements, units of measurement, measuring instruments and their methods of measurement. This book provides significant information of this discipline to help develop a good understanding of metrology and related fields. Its objective is to give a general view of the different areas of this discipline, and its applications. Researchers and students in this field will be assisted by this book.

Author : Luigi Cocco
Publisher : BoD – Books on Demand
Page : 294 pages
File Size : 43,8 Mb
Release : 2016-07-20
Category : Technology & Engineering
ISBN : 9789535124771

Get Book

New Trends and Developments in Metrology by Luigi Cocco Pdf

Investigating the incessant technology growth and the even higher complexity of engineering systems, one of the crucial requirements to confidently steer both scientific and industrial challenges is to identify an appropriate measurement approach. A general process can be considered effective and under control if the following elements are consciously and cyclically managed: numeric target, adequate tools, output analysis, and corrective actions. The role of metrology is to rigorously harmonize this virtuous circle, providing guidance in terms of instruments, standards, and techniques to improve the robustness and the accuracy of the results. This book is designed to offer an interdisciplinary experience into the science of measurement, not only covering high-level measurement strategies but also supplying analytical details and experimental setups.

Author : Semyon G. Rabinovich
Publisher : Springer Science & Business Media
Page : 278 pages
File Size : 50,5 Mb
Release : 2009-12-11
Category : Technology & Engineering
ISBN : 9781441914569

Get Book

Evaluating Measurement Accuracy by Semyon G. Rabinovich Pdf

"Evaluating Measurement Accuracy" is intended for anyone who is concerned with measurements in any field of science or technology. It reflects the latest developments in metrology and offers new results, but is designed to be accessible to readers at different levels: meteorologists, engineers and experimental scientists who use measurements as tools in their professions, graduate and undergraduate students in the natural sciences and engineering, and technicians performing complex measurements in industry, quality control, and trade. The material of the book is presented from the practical perspective and offers solutions and recommendations for problems that arise in conducting real-life measurements. This inclusion is a notable and unique aspect of this title as complex measurements done in industry and trade are often neglected in metrological literature, leaving the practitioners of these measurements to devise their own ad-hoc techniques.

Author : Oleh Velychko
Publisher : BoD – Books on Demand
Page : 152 pages
File Size : 46,9 Mb
Release : 2022-05-11
Category : Technology & Engineering
ISBN : 9781803550480

Get Book

Applied Aspects of Modern Metrology by Oleh Velychko Pdf

In the modern era of scientific and technological development, the role of measurements and metrology in scientific research is becoming more and more important due to the increase in the testing of various products. Moreover, requirements for the accuracy and reliability of measurement results are increasing significantly and their ranges are expanding. Improving measurement accuracy allows us to identify the shortcomings of certain technological processes and either eliminate them or reduce their influence. This leads to better-quality products and contributes to saving energy and other resources, as well as raw materials and materials. This book discusses relevant aspects of practical metrological activity to establish traceability of measurements while increasing their accuracy and reliability. It also presents procedures for the calibration and testing of measuring instruments.

Author : Ilya Gertsbakh
Publisher : Springer Science & Business Media
Page : 172 pages
File Size : 52,9 Mb
Release : 2003-05-21
Category : Mathematics
ISBN : 354000081X

Get Book

Measurement Theory for Engineers by Ilya Gertsbakh Pdf

Well written textbook on industrial applications of Statistical Measurement Theory. It deals with the principal issues of measurement theory, is concise and intelligibly written, and to a wide extent self-contained. Difficult theoretical issues are separated from the mainstream presentation. Each topic starts with an informal introduction followed by an example, the rigorous problem formulation, solution method, and a detailed numerical solution. Chapter are concluded with a set of exercises of increasing difficulty, mostly with solutions. Knowledge of calculus and fundamental probability and statistics is assumed.

Author : Ewa Bulska
Publisher : Springer
Page : 188 pages
File Size : 44,5 Mb
Release : 2018-09-29
Category : Science
ISBN : 9783319992068

Get Book

Metrology in Chemistry by Ewa Bulska Pdf

In this concise book, the author presents the essentials every chemist needs to know about how to obtain reliable measurement results. Starting with the basics of metrology and the metrological infrastructure, all relevant topics – such as traceability, calibration, chemical reference materials, validation and uncertainty – are covered. In addition, key aspects of laboratory management, including quality management, inter-laboratory comparisons, proficiency testing, and accreditation, are addressed.

Author : Shri Krishna Kimothi
Publisher : Quality Press
Page : 398 pages
File Size : 43,8 Mb
Release : 2001-11-01
Category : Business & Economics
ISBN : 9781636941813

Get Book

The Uncertainty of Measurements by Shri Krishna Kimothi Pdf

The uncertainty of measurement results is drawing attention of managers, metrologists and customers. The accuracy of measurements affects all of us in trade, commerce, safety, health care environmental protection and more. The quality of these measurements are regulated by a variety of government agencies. Measurement also plays an important role in manufacturing and service organizations. Use this book to learn more about metrology and the need for reliable measurements. You can also learn about measurement system and quality of measurement systems, objectives and methods. Statistical techniques in metrology are also explained. Examples of measurement data and random variables, probability density functions, sampling distribution, statistical estimation degrees of freedom and regression are included. An entire chapter is devoted to measurement errors. The book goes in-depth into explaining national and international measurement systems and standards, and includes a complete chapter on calibration and measurement trace ability. Measurement Uncertainty will show how to evaluate various uncertainties in measurements using several approaches including international consensus. Calibration laboratories can look specifically at the chapter on that profession to guide them in their measurement improvements. Kimothi also looks at specific industries and their measurement capabilities and includes examples of R&R studies. A great resource for the CQE, CQT, CCT, CSSBB certification exams!

Author : Paul De Bièvre,Helmut Günzler
Publisher : Springer Science & Business Media
Page : 318 pages
File Size : 44,8 Mb
Release : 2005-01-12
Category : Science
ISBN : 3540439897

Get Book

Traceability in Chemical Measurement by Paul De Bièvre,Helmut Günzler Pdf

Metrological traceability of chemical measurement results means the establishment of a relation to metrological stated references through an unbroken chain of comparisons. This volume collects 56 outstanding papers on the topic, mostly published in the period 2000-2003 in the journal "Accreditation and Quality Assurance". They provide the latest understanding, and possibly the rationalenbsp;why it is important to integrate the concept of metrological traceability including suitable measurement standards such as certified reference materials, into the standard measurement procedures of every analytical laboratory. In addition, this anthology considers the benefits to both the analytical laboratory and the user of the measurement results.