Strength Design For Reinforced Concrete Hydraulic Structures

Author : American Society of Civil Engineers
Publisher : Unknown
Page : 48 pages
File Size : 55,8 Mb
Release : 1993
Category : Technology & Engineering
ISBN : UOM:39015032936604

Get Book

Strength Design for Reinforced-concrete Hydraulic Structures by American Society of Civil Engineers Pdf

Strength Design for Reinforced-Concrete Hydraulic Structures is written in sufficient detail to not only provide the designer with design procedures, but also to present examples of their application. A review of general detailing requirements, as well as strength and serviceability requirements, create a strong understanding of the strength-design method. Latter chapters feature examples that demonstrate load-factor application, the design of members subjected to combined flexural and axial loads, the design of members subjected to biaxial bending, and the design for shear strength, including provisions for both special straight and curved members.

Author : United States. Army. Corps of Engineers
Publisher : Unknown
Page : 76 pages
File Size : 47,5 Mb
Release : 1992
Category : Hydraulic structures
ISBN : UCR:31210024815795

Get Book

Engineering and Design by United States. Army. Corps of Engineers Pdf

This manual provides guidance for designing reinforced concrete hydraulic structures by the strength-design method. Plain concrete and prestressed concrete are not covered in this manual.

Author : United States. Army. Corps of Engineers
Publisher : Unknown
Page : 128 pages
File Size : 53,8 Mb
Release : 1990
Category : Electronic
ISBN : OCLC:24105480

Get Book

Strength Design for Reinforced Concrete Hydraulic Structures by United States. Army. Corps of Engineers Pdf

Author : Tony C. Liu
Publisher : Unknown
Page : 108 pages
File Size : 49,8 Mb
Release : 1980
Category : Concrete strength
ISBN : UOM:39015086524751

Get Book

Strength Design of Reinforced Concrete Hydraulic Structures by Tony C. Liu Pdf

Author : Kurt H. Gerstle,Piotr Noakowski,Thomas Rauscher,U.S. Army Engineer Waterways Experiment Station,United States. Army. Corps of Engineers,Structures Laboratory (U.S.)
Publisher : Unknown
Page : 105 pages
File Size : 42,8 Mb
Release : 1989
Category : Pipe, Concrete
ISBN : OCLC:20282529

Get Book

Strength Design of Reinforced Concrete Hydraulic Structures by Kurt H. Gerstle,Piotr Noakowski,Thomas Rauscher,U.S. Army Engineer Waterways Experiment Station,United States. Army. Corps of Engineers,Structures Laboratory (U.S.) Pdf

Author : U. S. Army Corps of Engineers
Publisher : Unknown
Page : 64 pages
File Size : 55,5 Mb
Release : 2017-07-14
Category : Electronic
ISBN : 1521837406

Get Book

Reinforced Concrete Hydraulic Structures by U. S. Army Corps of Engineers Pdf

This manual provides guidance for designing reinforced concrete hydraulicstructures by the strength-design method.Scopea. This manual is written in sufficient detail to not only provide thedesigner with design procedures, but to also provide examples of theirapplication. Also, derivations of the combined flexural and axial loadequations are given to increase the designer's confidence and understanding.b. General detailing requirements are presented in Chapter 2.Chapter 3 presents strength and serviceability requirements, including loadfactors and limits on flexural reinforcement. Design equations for memberssubjected to flexural and/or axial loads (including biaxial bending) are givenin Chapter 4. Chapter 5 presents guidance for design for shear, includingprovisions for curved members and special straight members. The appendicesinclude notation, equation derivations, and examples. The examplesdemonstrate load-factor application, design of members subjected to combinedflexural and axial loads, design for shear, development of an interactiondiagram, and design of members subjected to biaxial bending.

Author : Anonim
Publisher : Unknown
Page : 128 pages
File Size : 55,6 Mb
Release : 1980
Category : Hydraulic structures
ISBN : OCLC:633520673

Get Book

Strength Design of Reinforced Concrete Hydraulic Structures by Anonim Pdf

Author : Stanley C. Woodson,William A. Price
Publisher : Unknown
Page : 44 pages
File Size : 42,5 Mb
Release : 1992
Category : Hydraulic structures
ISBN : OCLC:25932277

Get Book

Improved Strength Design of Reinforced Concrete Hydraulic Structures - Research Support by Stanley C. Woodson,William A. Price Pdf

Author : KARUNA MOY GHOSH
Publisher : PHI Learning Pvt. Ltd.
Page : 179 pages
File Size : 41,7 Mb
Release : 2013-01-14
Category : Technology & Engineering
ISBN : 9788120345942

Get Book

Analysis and Design Practice of Hydraulic Concrete Structures by KARUNA MOY GHOSH Pdf

This book provides a comprehensive description of the analysis and design process of some hydraulic concrete structures designed to retain and contain aqueous liquid. The first edition discussed six types of structures of different functions, namely: (a) An underground sedimentation tank for sewage treatment.(b) An underground digestion tank for sludge treatment.(c) An underground reservoir to store fresh potable water.(d) An immersed highway tunnel under the river bed.(e) An indoor swimming pool of rectangular shape for public recreation.(f) A gravity dam across a valley for converting the valley into a fresh water reservoir. This Second Edition incorporates another type of hydraulic structure, namely spillway. The spillway structure plays a vital role in regulating the designed reservoir water level to meet the fluctuating demand of water supply for the generation of hydroelectricity, irrigation and water supply purposes in controlling the height of reservoir water level downstream of the river. The spillway structure subjected to seismic hydrodynamic pressure in addition to the hydrostatic pressure, has been analysed and designed in full compliance with Eurocodes EC 2: Part 1–1 and Part 3 as water-retaining structure. The other six structures have been analysed and designed with reference to the relevant clauses of codes of practice prescribed in Eurocodes 2 and BS 8007 and BS 8110. The book is designed to serve as a useful practical guide and a valuable reference for senior undergraduate students of civil engineering and postgraduate students specializing in structural design, as well as practising and consulting engineers involved in the design and execution of hydraulic concrete structures.

Author : J. Paul Guyer
Publisher : Independently Published
Page : 36 pages
File Size : 52,9 Mb
Release : 2018-08-14
Category : Electronic
ISBN : 1718140142

Get Book

An Introduction to Design Criteria for Concrete Structures by J. Paul Guyer Pdf

This publication provides introductory technical guidance for civil engineers and structural engineers interested in strength and serviceability design criteria for reinforced concrete hydraulic structures. Here is what is discussed: 1. GENERAL, 2. SERVICEABILITY LIMIT STATES, 3. STRENGTH LIMIT STATES., 4. STRUCTURAL STABILITY ANALYSIS, 5. CRITICAL AND NORMAL STRUCTURES, 6. HYDRAULIC STRUCTURES SUPPORTING VEHICLES, 7. LOADS.

Author : J. Paul Guyer
Publisher : Independently Published
Page : 36 pages
File Size : 43,9 Mb
Release : 2018-07-03
Category : Technology & Engineering
ISBN : 1983348368

Get Book

An Introduction to Reinforcement, Strength and Serviceability Requirements for Reinforced Concrete Hydraulic Structures by J. Paul Guyer Pdf

This publication provides introductory technical guidance for civil engineers, structural engineers and other professional engineers and construction managers interested in reinforcement, strength and serviceability requirements for reinforced concrete hydraulic structures. Here is what is discussed: 1. DETAILS OF REINFORCEMENT, 2. STRENGTH AND SERVICEABILITY REQUIREMENTS, 3. REQUIRED STRENGTH.

Author : Clifton C. Hamby,William A. Price
Publisher : Unknown
Page : 110 pages
File Size : 49,9 Mb
Release : 1984
Category : CSTR (Computer program)
ISBN : ERDC:35925000746773

Get Book

User's Guide for Concrete Strength Investigation and Design (CSTR) by Clifton C. Hamby,William A. Price Pdf

CSTR, called X0066 in the Conversationally Oriented Real-Time Program-Generating System (CORPS) library, is a general-purpose computer program for the strength theory analysis or design of reinforced concrete beams or columns, in accordance with ETL 1110-2-265 for hydraulic structures. It is intended to be an easy-to-use program. Program CSTR is versatile in that its capabilities extend from design of new concrete hydraulic structures to investigation of already existing designs. Its analysis is based on the rectangular stress block described in ETL 1110-2-265. The design procedure is computer-aided rather than automatic and computes the minimum reinforcement required for a given width and depth, and displays the resulting interaction diagram. The program also computes and prints the minimum effective depth of a given section which satisfies strength requirements and steel ratio requirements without compressive reinforcement. The investigation procedure shows interaction diagrams and calculates compliance with ductile failure criteria. Originator supplied keywords include: Computer aided design; Concrete products--evaluation; CSTR (Computer program); Hydraulic structures; Fortran; Mechanical drawings.

Author : J. Paul Guyer, P.E., R.A.
Publisher : Guyer Partners
Page : 30 pages
File Size : 55,7 Mb
Release : 2018-01-27
Category : Technology & Engineering
ISBN : 8210379456XXX

Get Book

An Introduction to Strength and Serviceability Requirements for Reinforced Concrete Hydraulic Structures by J. Paul Guyer, P.E., R.A. Pdf

Introductory guidance for civil and structural engineers interested in strength and serviceability requirements for reinforced concrete hydraulic structures. Here is what is discussed: 1. GENERAL 2. SERVICEABILITY LIMIT STATES 3. STRENGTH LIMIT STATES. 4. STRUCTURAL STABILITY ANALYSIS 5. CRITICAL AND NORMAL STRUCTURES 6. HYDRAULIC STRUCTURES SUPPORTING VEHICLES 7. LOADS.

Author : Vincent Chiarito,Paul F. Mlakar
Publisher : Unknown
Page : 180 pages
File Size : 51,6 Mb
Release : 1986
Category : Hydraulic structures
ISBN : UOM:39015086524686

Get Book

Strength Design of Reinforced Concrete Hydraulic Structures by Vincent Chiarito,Paul F. Mlakar Pdf

Author : Bahram M. Shahrooz
Publisher : Transportation Research Board
Page : 83 pages
File Size : 50,7 Mb
Release : 2011
Category : Science
ISBN : 9780309155410

Get Book

Design of Concrete Structures Using High-strength Steel Reinforcement by Bahram M. Shahrooz Pdf

TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaluates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online.