Third Rilem International Conference On Concrete And Digital Fabrication

Author : Richard Buswell,Ana Blanco,Sergio Cavalaro,Peter Kinnell
Publisher : Springer Nature
Page : 478 pages
File Size : 53,6 Mb
Release : 2022-06-24
Category : Technology & Engineering
ISBN : 9783031061165

Get Book

Third RILEM International Conference on Concrete and Digital Fabrication by Richard Buswell,Ana Blanco,Sergio Cavalaro,Peter Kinnell Pdf

This book gathers peer-reviewed contributions presented at the 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held in Loughborough, UK, on June 27-29, 2022. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Author : Timothy Wangler,Robert J. Flatt
Publisher : Springer
Page : 334 pages
File Size : 53,8 Mb
Release : 2018-08-29
Category : Technology & Engineering
ISBN : 9783319995199

Get Book

First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018 by Timothy Wangler,Robert J. Flatt Pdf

Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.

Author : Freek P. Bos,Sandra S. Lucas,Rob J.M. Wolfs,Theo A.M. Salet
Publisher : Springer Nature
Page : 1209 pages
File Size : 52,5 Mb
Release : 2020-07-08
Category : Technology & Engineering
ISBN : 9783030499167

Get Book

Second RILEM International Conference on Concrete and Digital Fabrication by Freek P. Bos,Sandra S. Lucas,Rob J.M. Wolfs,Theo A.M. Salet Pdf

This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Author : Timothy Wangler,Robert Flatt
Publisher : Unknown
Page : 128 pages
File Size : 46,8 Mb
Release : 2019
Category : TECHNOLOGY & ENGINEERING
ISBN : 3319995200

Get Book

First RILEM International Conference on Concrete and Digital Fabrication -- Digital Concrete 2018 by Timothy Wangler,Robert Flatt Pdf

Author : Nicolas Roussel,Dirk Lowke
Publisher : Springer Nature
Page : 242 pages
File Size : 53,8 Mb
Release : 2022-01-12
Category : Technology & Engineering
ISBN : 9783030905354

Get Book

Digital Fabrication with Cement-Based Materials by Nicolas Roussel,Dirk Lowke Pdf

This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.

Author : Nemkumar Banthia
Publisher : Springer Nature
Page : 1210 pages
File Size : 55,8 Mb
Release : 2024-06-29
Category : Electronic
ISBN : 9783031533891

Get Book

Smart & Sustainable Infrastructure: Building a Greener Tomorrow by Nemkumar Banthia Pdf

Author : Biranchi Panda,Pshtiwan N. Shakor,Vittoria Laghi
Publisher : Emerald Group Publishing
Page : 257 pages
File Size : 46,9 Mb
Release : 2023-12-08
Category : Technology & Engineering
ISBN : 9780727766427

Get Book

Additive Manufacturing for Construction by Biranchi Panda,Pshtiwan N. Shakor,Vittoria Laghi Pdf

Additive Manufacturing for Construction reveals additive manufacturing technologies for building and construction applications. The book explores on-site and off-site construction techniques, featuring design strategies which will eliminate production difficulties and minimise assembly costs, from both academic and industrial perspectives.

Author : Giancarlo Di Marco
Publisher : Springer Nature
Page : 288 pages
File Size : 41,7 Mb
Release : 2024-06-29
Category : Electronic
ISBN : 9789819706211

Get Book

Creativity in the Age of Digital Reproduction by Giancarlo Di Marco Pdf

Author : Paulo Sérgio Duque de Brito,João Rafael da Costa Sanches Galvão,Pedro Monteiro,Roberta Panizio,Luís Calado,Ana Carolina Assis,Filipe dos Santos Neves,Flávio Craveiro,Henrique de Amorim Almeida,Joel Oliveira Correia Vasco,Ricardo de Jesus Gomes,Sandra de Jesus Martins Mourato,Vânia Sofia Santos Ribeiro
Publisher : Springer Nature
Page : 550 pages
File Size : 41,8 Mb
Release : 2023-02-26
Category : Science
ISBN : 9783031268496

Get Book

Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022) by Paulo Sérgio Duque de Brito,João Rafael da Costa Sanches Galvão,Pedro Monteiro,Roberta Panizio,Luís Calado,Ana Carolina Assis,Filipe dos Santos Neves,Flávio Craveiro,Henrique de Amorim Almeida,Joel Oliveira Correia Vasco,Ricardo de Jesus Gomes,Sandra de Jesus Martins Mourato,Vânia Sofia Santos Ribeiro Pdf

This book publishes some papers presented at The International Conference on Water Energy Food and Sustainability (ICoWEFS 2023), a major forum to foster innovation and exchange knowledge in the water-energy-food nexus. The topics covered embrace the Sustainable Development Goals (SDGs) of the United Nations, including Future trends in Water Security, Smart Technologies in Sustainable Energy Production Systems, Circular systems for rural and urban food and Integrated Ecosystems Management.

Author : Eduardo B. Pereira,Joaquim A. O. Barros,Fabio P. Figueiredo
Publisher : Springer Nature
Page : 351 pages
File Size : 41,8 Mb
Release : 2021-07-31
Category : Technology & Engineering
ISBN : 9783030765477

Get Book

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC2020) by Eduardo B. Pereira,Joaquim A. O. Barros,Fabio P. Figueiredo Pdf

This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimarães and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “Strategies for a resilient built environment”, which covers the current and emerging approaches that lead to an optimized design and maintenance of constructions and systems. It includes the development of service life models and life cycle design, in order to maximise longevity and level of service while minimising the environmental impact of constructions and systems. It also includes the analysis and design of larger systems, such as communities, cities or regions, aiming at reducing risk and increasing resilience. The following subtopics are included: resilience and robustness of the built environment and communities at local and global scales; risk based inspection and maintenance; life cycle analysis and service models; performance based design; improved design strategies by integrating materials and structures.

Author : Alper Ilki,Derya Çavunt,Yavuz Selim Çavunt
Publisher : Springer Nature
Page : 1969 pages
File Size : 55,9 Mb
Release : 2023-05-31
Category : Technology & Engineering
ISBN : 9783031325199

Get Book

Building for the Future: Durable, Sustainable, Resilient by Alper Ilki,Derya Çavunt,Yavuz Selim Çavunt Pdf

This book presents the proceedings of the fib Symposium “Building for the future: Durable, Sustainable, Resilient”, held in Istanbul, Turkey, on 5–7 June 2023. The book covers topics such as concrete and innovative materials, structural performance and design, construction methods and management, and outstanding structures. fib (The International Federation for Structural Concrete) is a not-for-profit association whose mission is to develop at an international level the study of scientific and practical matters capable of advancing the technical, economic, aesthetic, and environmental performance of concrete construction.

Author : Viktor Mechtcherine,Kamal Khayat,Egor Secrieru
Publisher : Springer Nature
Page : 663 pages
File Size : 44,5 Mb
Release : 2019-08-24
Category : Technology & Engineering
ISBN : 9783030225667

Get Book

Rheology and Processing of Construction Materials by Viktor Mechtcherine,Kamal Khayat,Egor Secrieru Pdf

This book gathers the peer-reviewed contributions presented at two parallel, closely interconnected events on advanced construction materials and processes, namely the 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2) and the 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), held in Dresden, Germany on 8-11 September 2019. The papers discuss various aspects of research on the development, testing, and applications of cement-based and other building materials together with their specific rheological properties. Furthermore, the papers cover the latest findings in the fast-growing field of self-compacting concrete, addressing topics including components’ properties and characterization; chemical admixtures, effect of binders (incl. geopolymers, calcined clay, etc.) and mixture design; laboratory and in-situ rheological testing; constitutive models and flow modelling; numerical simulations; mixing, processing and casting processes; and additive manufacturing / 3D-printing. Also presenting case studies, the book is of interest to researchers, graduate students, and industry specialists, such as material suppliers, consultants and construction experts.

Author : Arnaud Perrot
Publisher : John Wiley & Sons
Page : 141 pages
File Size : 42,6 Mb
Release : 2019-04-10
Category : Technology & Engineering
ISBN : 9781119610786

Get Book

3D Printing of Concrete by Arnaud Perrot Pdf

The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.

Author : Andrey A. Radionov
Publisher : Springer Nature
Page : 611 pages
File Size : 44,8 Mb
Release : 2024-06-29
Category : Electronic
ISBN : 9783031478109

Get Book

Proceedings of the 7th International Conference on Construction, Architecture and Technosphere Safety by Andrey A. Radionov Pdf

Author : Haşim Altan,Samad Sepasgozar,Abdullateef Olanrewaju,Francisco José García Peñalvo,Alessandro Gaetano Severino,Tiko Iyamu,Ju Hyun Lee
Publisher : Springer Nature
Page : 272 pages
File Size : 41,6 Mb
Release : 2022-12-14
Category : Art
ISBN : 9783031112324

Get Book

Advances in Architecture, Engineering and Technology by Haşim Altan,Samad Sepasgozar,Abdullateef Olanrewaju,Francisco José García Peñalvo,Alessandro Gaetano Severino,Tiko Iyamu,Ju Hyun Lee Pdf

This book summarizes the latest studies regarding innovation in urban design and planning. It shares many tips and insights about sustainable solutions for the issues facing transport systems, innovative digital technologies, and ICT trends. The book touches upon the need to integrate the three fields of Architecture, Engineering, and Technology that have become indispensable. This is intended to respond to the increasing human needs and population growth in cities on one hand and to develop a holistic approach that helps overcome challenges to sustainability and environment management on the other hand. With the power of engineering in practice, problems of design and development once considered too complex to be dealt with other than empirically, intuitively, or by trial and error, are now becoming more solvable and applicable. This book offers strategies and solutions that enable designers to bring together knowledge in the fields of architecture, engineering, and technology to overcome challenges facing in modern times.