Author : https://www.chinesestandard.net
Publisher : https://www.chinesestandard.net
Page : 8 pages
File Size : 41,5 Mb
Release : 2024-06-03
Category : Technology & Engineering
ISBN : 8210379456XXX
YS/T 252.2-2007 Translated English of Chinese Standard (YS/T 252.2-2007, YST252.2-2007) by https://www.chinesestandard.net Pdf
This Part specifies the method for determination of iron content in high nickel matte. This Part is applicable to the determination of iron content in high nickel matte. Measuring range: 0.5% ~ 7%. 2 Method summary The sample is decomposed with hydrochloric acid, nitric acid-potassium chlorate saturated solution. In the hydrochloric acid medium of pH1.5 ~ pH3.0, iron (III) and sulfosalicylic acid form a reddish-brown complex, whose absorbance is measured at the wavelength of 545 nm with a spectrophotometer. Calculate the iron content according to the standard curve method. 3 Reagents 3.1 Hydrochloric acid (¦Ñ1.19 g/mL). 3.2 Hydrochloric acid (1 + 3). 3.3 Nitric acid (¦Ñ1.42 g/mL). 3.4 Ammonia (1 + 3). 3.5 Nitric acid-potassium chlorate saturated solution: Dissolve potassium chlorate in nitric acid (3.3) until saturated. 3.6 Sulfosalicylic acid solution (100 g/L): Weigh 10 g of sulfosalicylic acid. Dissolve it in water and dilute it to 100 mL. Adjust it to about pH2 with ammonia water (3.4). 3.7 Iron standard solution: Weigh 0.1500 g of metallic iron (mass fraction of iron ¡Ý 99.9%). Place it in a 250 mL beaker. Add 20 mL of nitric acid (1 + 1). Heat to completely dissolve. Boil to drive out nitrogen oxides. Remove it. Cool to room temperature. Transfer to a 1000 mL volumetric flask. Use water to make the volume reach to the mark. 1 mL of this solution contains 0.15 mg of iron. YS/T 252.2-2007 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery. Page 6 of 8 4 Instruments Spectrophotometer. 5 Analytical procedures 5.1 Sample Weigh 0.400 g of sample, accurate to 0.0001