2018 Fib Awards For Outstanding Concrete Structures
2018 Fib Awards For Outstanding Concrete Structures Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of 2018 Fib Awards For Outstanding Concrete Structures book. This book definitely worth reading, it is an incredibly well-written.
2018 fib Awards for Outstanding Concrete Structures by FIB – International Federation for Structural Concrete Pdf
The fib Awards for Outstanding Concrete Structures are attributed every four years at the fib Congress, with the goal of enhancing the international recognition of concrete structures that demonstrate the versatility of concrete as a structural medium. The award consists of a bronze plaque to be displayed on the structure, and certificates presented to the main parties responsible for the work. Applications are invited by the fib secretariat via the National Member Groups. Information on the competition is also made available on the fib’s website, and in the newsletter fib-news published in Structural Concrete. The submitted structures must have been completed during the four years prior to the year of the Congress at which the awards are attributed. The jury may accept an older structure, completed one or two years before, provided that it was not already submitted for the previous award attribution (Mumbai, 2014). The submitted structures must also have the support of an fib Head of Delegation or National Member Group Secretary in order to confirm the authenticity of the indicated authors. Entries consist of the completed entry form, three to five representative photos of the whole structure and/or any important details or plans, and short summary texts explaining: - the history of the project; - description of the structure; - particularities of its realisation (difficulties encountered, special solutions found, etc.). A jury designated by the Presidium selects the winners. The awards are attributed in two categories, Civil Engineering Structures (including bridges) and Buildings. Two or three ‘Winners’ and two to four ‘Special Mention’ recipients are selected in each category, depending on the number of entries received. The jury takes into account criteria such as: - design aspects, including aesthetics and design detailing; - construction practice and quality of work; - environmental aspects of the design and its construction; - durability and sustainability aspects; - significance of the contribution made by the entry to the development and improvement of concrete construction. The decisions of the jury are definitive and cannot be challenged. They are unveiled at a special ceremony during the fib Congress in Melbourne.
2022 fib Awards for Outstanding Concrete Structures by FIB – International Federation for Structural Concrete Pdf
The fib has two major missions now. One is to work toward the publication of the Model Code 2020, and the other is to respond to the global movement toward carbon neutrality. While the former is steadily progressing toward completion, the latter will require significant efforts for generations to come. As we all know, cement, the primary material for concrete, is a sector that accounts for 8.5% of the world’s CO2 emissions. And the structural concrete that fib handles consume 60% of that. In other words, we need to know the reality that our structural concrete is emitting 5% of the world’s CO2. From now on, fib members, suppliers, designers, builders, owner’s engineers, and academic researchers will be asked how to solve this difficult problem. In general, most of the CO2 emissions in the life cycle of structural concrete come from the production stage of materials and the use stage after construction, i.e. A1 to A3 and B1 to B5 processes as defined in EN15978. Cement and steel sectors, which are the main materials for structural concrete, are expected to take various measures to achieve zero carbon in their respective sectors by 2050. Until then, we must deal with the transition with our low carbon technologies. Regarding the production stage, the fib has recently launched TG4.8 “Low carbon concrete”. And the latest low carbon technologies will be discussed there. On the other hand, in the use stage, there is very little data on the relationship between durability and intervention and maintenance so far. The data accumulation here is the work of the fib, a group of various experts on structural concrete. Through-life management using highly durable structures and precise monitoring will enable to realize minimum maintenance in the use stage and to minimize CO2 emissions. Furthermore, it is also possible to contribute to the reduction of CO2 emissions in the further stage after the first cycle by responding to the circular economy, that is, deconstruction (C), reuse, and recycle (D). However, the technology in this field is still in its infancy, and further research and development is expected in the future. As described above, structural concrete can be carbon neutral in all aspects of its conception, and it can make a significant contribution when it is realized. The fib will have to address these issues in the future. Of course, it will not be easy, and it will take time. However, if we do not continue our efforts as the only international academic society on structural concrete in the world to achieve carbon neutrality, the significance of our very existence may be questioned. Long before Portland cement was invented, Roman concrete, made of volcanic ash and other materials, was the ultimate low-carbon material, and is still in use 2’000 years later because of its non-reinforced structure and lack of deterioration factors. Reinforced concrete, which made it possible to apply concrete to structures other than arches and domes, is only 150 years old. Prestressed concrete is even younger, with only 80 years of history. Now that we think about it, we realize that Roman concrete, which is non-reinforced low carbon concrete, is one of the examples of problem solving that we are trying to achieve. We have new materials, such as coated reinforcement, FRP, and fiber reinforced concrete, which can be used in any structural form. To overcome this challenge with all our wisdom would be to live up to the feat the Romans accomplished 2’000 years ago. Realizing highly durable and elegant structures with low-carbon concrete is the key to meet the demands of the world in the future. I hope you will enjoy reading this AOS brochure showing the Outstanding Concrete Structures Awards at the fib 2022 Congress in Oslo. And I also hope you will find some clues for the challenges we are facing.
2006 Fib Awards for Outstanding Concrete Structures by fib Fédération internationale du béton Pdf
ib Bulletin 36 presents the structures that were selected as winners, special mentions and nominees in the 2006 edition of the fib Awards for Outstanding Concrete Structures competition. The awards are attributed in two categories, "Buildings" and "Civil Engineering Structures", and give international recognition to structures that demonstrate the versatility of concrete as a structural medium.
Guide for Strengthening of Concrete Structures by FIB – International Federation for Structural Concrete Pdf
The idea of preparing a technical document for the repairs and interventions upon concrete structures goes back to the former fib COM 5: Structural Service Life Aspects, being the goal of the then TG 5.9. After a long period of reduced activity, and taking into account the reorganization of fib commissions that meanwhile took place, on June 2017 a different approach was proposed to push forward the task of TG 8.1 (formerly TG 5.9). The (new) goal of TG 8.1 was to deliver a ‘how-to-do’ guide, gathering together protection, repair, and strengthening techniques for concrete structures. Chapters are intended to provide both guidelines and case-studies, serving as support to the application of fib MC 2020 pre-normative specifications. Each chapter was written by an editorial team comprising desirably at least a researcher, a designer and a contractor. Templates have been prepared in order to harmonize the contents and the presentation of the different methods. Following the writing process, chapters were reviewed by experts and, after amendments by the authors, they underwent a second review process by COM 8 and TG 3.4 members, as well as by different practitioners. For each protection, repair and strengthening method addressed in this guide, readers have a description of when to adopt it, which materials and systems are required, which techniques are available, and what kind of equipment is needed. It then presents a summary of stakeholders’ roles and qualifications, design guidelines referring to most relevant codes and references, the intervention procedure, quality control measures and monitoring and maintenance activities. Due to the extent of the guide, it was decided to publish it as bulletin 102, addressing protection and repair methods, and bulletin 103, addressing strengthening methods. We would like to thank the authors, reviewers and members of COM 8 and TG 3.4 for their work in developing this fib Bulletin, which we hope will be useful for professionals working in the field of existing concrete structures, especially those concerned with life-cycle management and conservation activities. As noted above, this Bulletin is also intended to act as a background and supporting document to the next edition of the fib Model Code for Concrete Structures, which is currently under development under the auspices of TG10.1 with the working title of ‘fib Model Code 2020’.
Serviceability Limit State of Concrete Structures by FIB – International Federation for Structural Concrete Pdf
Serviceability limit states are essential for appropriate function and durability of concrete structures. The attention is paid especially to the stress limitation, crack width analysis and deflection analysis. The document provides supplementary information to the fib Model Code 2010 (MC2010), where a limited space did not allow for a detailed description of individual procedures. The principles used in MC2010 in chapter 7.6 are explained in detail within this document. The stress analysis is focused on stresses in concrete and steel including the stress redistribution due to the long-term load and cracking of reinforced concrete and prestressed concrete elements. Crack width analysis explains the mechanism of cracking under mechanical loading and due to deformation restraint. Cracks in prestressed concrete elements are also discussed. Deflection analyses with different levels of accuracy are described including the shear effects. Examples illustrate the practical application of rules defined in the MC2010 of individual serviceability limit states. Simplified and more general methods are used. An important part of the bulletin shows the development and extension of the serviceability limit states after publishing of the MC2010 and alternative approaches. Special attention is paid to deflections of prestressed concrete beams, shear effects on deflection, slenderness limits and influence of the concrete cover. The final part deals with an application of numerical simulations.
Precast Concrete in Tall Buildings by FIB – International Federation for Structural Concrete Pdf
There has been continued global growth in tall building construction over recent years. The variation in the use of such buildings is remarkable, from lavish hotels and apartments to socially affordable units. As the world struggles to cope with growing numbers of people, dwindling resources and movements from rural to urban habitats it is unavoidable that population densities will increase, and more efficient use of scarce land will be needed. Taller buildings are the inevitable consequence. Tall buildings can use several different types of material to form their framework and envelope. Those materials are mixed to provide an optimum building solution to suit client requirements such as structure, occupancy, vision, affordability, timing, sustainability and quality. Precast concrete is one of those materials, and has been used from whole frameworks to facades, and elements mixed with structural steelwork and cast in place concrete. This state of the art report shows how precast concrete can be effectively integrated into tall buildings using modern materials and techniques, drawing on the experience and expertise that is currently available in the global precast concrete industry. The report is aimed at not only building professionals and students, but also at contractors, investors, owners, public bodies and any other parties interested in the possibilities for use of precast concrete in tall building construction. Extensive case studies at the end of the Bulletin illustrate the benefits and applications discussed in the earlier chapters.
Advances on bond in concrete by FIB – International Federation for Structural Concrete Pdf
Structural behavior of reinforced concrete elements strongly depends on the interaction between the reinforcing bars and the surrounding concrete, which is generally referred as “bond in concrete”. In service conditions, the reinforcement-to-concrete bond governs deformability through the tension stiffening of concrete surrounding the bar as well the crack development and crack width. At Ultimate Limit State, bond governs anchorage and lap splices behavior as well as structural ductility. When plain (smooth) bars were used, the steel-to-concrete bond was mainly associated with “chemical adhesion/friction” that is related to the surface roughness of the rebar. As steel strengths increased the need to enhance interaction between steel and the surrounding concrete was recognized, and square twisted rebars, indented rebars or, later on, ribbed rebars came into the market, the latter being the type of deformed bar most commonly adopted since the 1960/70s. When ribbed rebars became widely used, several research studies started worldwide for better understanding the interaction between ribs and the surrounding concrete. Researchers evidenced the development of micro-cracks (due to the wedge action of the ribs) towards the external face of the structural element. If confinement is provided by the concrete cover, by transverse reinforcement or by an external transverse pressure, the full-anchorage capacity is guaranteed and a pull-out failure occurs, with crushing of concrete between the ribs. On the contrary, with lesser confining action, a splitting failure of bond occurs; the latter may provoke a brittle failure of the lap splice or, in some cases, of anchorages. However, after many years of research studies on bond-related topics, there are still several open issues. In fact, new materials entered into the market, as concrete with recycled aggregates or fibre reinforced concrete; the latter, having a kind of distributed reinforcement into the matrix (the fibres), provides a better confinement to the wedge action of the ribs. In addition, concrete and steel strength continuously increased over the years, causing changes in the bond behavior due to differences in mechanical properties of materials but also to the different concrete composition at the interface with the steel rebar causing a different bond behavior. Moreover, the lower water/cement ratio of these high-strength concrete makes the bleeding phenomena less evident, changing the concrete porosity in the upper layers of the structural element and thus making the current casting position parameters no-longer reliable. Finally, concrete with recycled aggregates are becoming more important in a market that is looking forward to a circular economy. As such, all the experimental results and database that allowed the calibration of bond rules now present in building codes for conventional concrete, may be not be representative of these new types of materials nowadays adopted in practice. Furthermore, after more than 50 years of service life, structural elements may not satisfy the current safety requirements for several reasons, including material degradation (with particular reference to steel corrosion) or increased loads, by also considering the seismic actions that were non considered by building codes at the time of the original design. The structural assessment of existing structures requires proper conceptual models and new approaches for evaluating the reliability of existing structures by also considering the remaining expected service life. In addition, specific rules for older materials, as plain smooth bars, should be revised for a better assessment of old structures. Last, but not least, interventions in existing structures may require new technologies now available such as post-installed rebars. While many advances have been achieved, there remain areas where a better understanding of bond and its mechanisms are required, and where further work is required to incorporate this understanding into safe and economic rules to guide construction and maintenance of existing infrastructures. These aspects were widely discussed within the technical community, particularly in the fib Task Group 2.5 and in the ACI 408 Committee dealing with bond and anchorage issues. Furthermore, special opportunities for discussing bond developments were represented by the International Conferences on ‘Bond in Concrete’ held each decade since 1982 as well as by joint workshops organized by fib TG2.5 and ACI 408. Within this technical collaboration, this Bulletin was conceived, and, thus, it collects selected papers presented at the joint fib-ACI Convention Session on Bond in Concrete held in Detroit (USA) in 2017. The bulletin is based on four main Sections concerning: - General aspects of bond - Anchorages and laps of bars and prestressing tendons - Bond under severe conditions - Degradation of bond for corrosion - Bond in new types of concrete The main aim of the Bulletin is to shed some new lights on the advances in understanding and application of bond related issues achieved over the last few years, and identify the challenges and priorities to be addressed in the next years. Another important aspect of the bulletin is to provide practical information from research findings.
Fibre Reinforced Concrete by FIB – International Federation for Structural Concrete Pdf
Fibre Reinforced Concrete (FRC) is a composite material characterized by an enhanced post-cracking tensile residual strength, due to the capacity of fibres to bridge the crack faces by means of pull-out mechanism. Due to a better knowledge of FRC and the recent developments worldwide of guidelines for structural design, the fib Special Activity Group 5, who prepared the new fib Model Code, decided to introduce some sections on new materials and in particular on FRC structural design. At that time, working Groups TG 8.3 (“Fibre reinforced concrete”) and TG 8.6 (“Ultra high performance fibre reinforced concrete”) of fib prepared these sections of the new fib Model Code concerning FRC design rules for providing a guidance to engineers to properly and safely design FRC structural elements, both at serviceability and at ultimate limit states, based on the state-of-the-art knowledge. This bulletin was written with the aim to share the main framework used by the two groups to introduce these two sections and to describe the many aspects already known, but not yet introduced in the Model Code. Even though the basic principles introduced in the two sections are mainly obtained from research on steel fibre reinforced concrete, the Model Code is open to every type of fibres, following a performance-based design approach. The bulletin represents a wide effort made by the people of the Task Group 4.1 and 4.2 to trace the knowledge on FRC and aims to be helpful for structural designers when using this new material in the practice.
Precast concrete bridge continuity over piers by FIB – International Federation for Structural Concrete Pdf
Concrete bridges are an important part of today's road infrastructure. An important part of those concrete bridges is to a large extent prefabricated. Precast concrete enables all the advantages of an industrialized process to be fully utilized. Contemporary concrete mixtures are used to realize high-strength bridge girders and piers that exactly meet the requirements set, both structurally and aesthetically, with a small ecological footprint. Sustainable and durable! On the construction site, there is no need for complex formwork, the execution time is drastically reduced and where road, water and rail traffic on or under the bridge has to be temporarily interrupted, it is only minimally inconvenienced during the execution of the project. There is a wide variety of prefabricated bridges. In 2004, the fib commission on prefabrication already published the Bulletin 29 Precast concrete bridges which, in addition to the history of prefabricated bridges, also gave an overview of the different bridge types and structural systems. This document elaborates on one specific structural system: the continuous bridge. Task Group 6.5 "Precast concrete bridges" discusses in detail how to achieve continuity over the piers with precast elements. This bulletin bundles the experiences of experts in the field of bridge design so that less experienced designers would be able to identify the points of attention and make a correct design. In addition to the theoretical considerations, the principles are tested against three realizations in the USA and Europe. Commission 6 thanks the Co-Conveners Maher Tadros and Hugo Corres and all active members of the Task Group for sharing their knowledge and experience and for the successful realization of this bulletin.
Guide for Protection and Repair of Concrete Structures by FIB – International Federation for Structural Concrete Pdf
The idea of preparing a technical document for the repairs and interventions upon concrete structures goes back to the former fib COM5: Structural Service Life Aspects, being the goal of the then TG5.9. After a long period of reduced activity, and taking into account the reorganization of fib commissions that meanwhile took place, on June 2017 a different approach was proposed to push forward the task of TG8.1 (formerly TG5.9). The (new) goal of TG 8.1 was to deliver a ‘how-to-do’ guide, gathering together protection, repair, and strengthening techniques for concrete structures. Chapters are intended to provide both guidelines and case-studies, serving as support to the application of fib MC2020 pre-normative specifications. Each chapter was written by an editorial team comprising desirably at least a researcher, a designer and a contractor. Templates have been prepared in order to harmonize the contents and the presentation of the different methods. Following the writing process, chapters were reviewed by experts and, after amendments by the authors, they underwent a second review process by COM8 and TG3.4 members, as well as by different practitioners. For each protection, repair and strengthening method addressed in this guide, readers have a description of when to adopt it, which materials and systems are required, which techniques are available, and what kind of equipment is needed. It then presents a summary of stakeholders’ roles and qualifications, design guidelines referring to most relevant codes and references, the intervention procedure, quality control measures and monitoring and maintenance activities. Due to the extent of the guide, it was decided to publish it as bulletin 102, addressing protection and repair methods, and bulletin 103, addressing strengthening methods. We would like to thank the authors, reviewers and members of COM8 and TG3.4 for their work in developing this fib Bulletin, which we hope will be useful for professionals working in the field of existing concrete structures, especially those concerned with life-cycle management and conservation activities. As noted above, this Bulletin is also intended to act as a background and supporting document to the next edition of the fib Model Code for Concrete Structures, which is currently under development under the auspices of TG10.1 with the working title of "fib Model Code 2020".
External Tendons for Bridges by FIB – International Federation for Structural Concrete Pdf
The concept of post-tensioning has been recognized for over a century. Interestingly, early developments started with external tendons, but failed to be recognized as a major construction technique for two main reasons: - Low tensile performance of early steels in combination with a poor knowledge of concrete creep and shrinkage properties, - Lack of a durable corrosion protection. With the technological progress, external tendons became increasingly popular in the 1980’s, as a post-tensioning method enabling inspection and, if necessary, replacement of tendons without demolition of structural members. Towards the end of the last century, more than 50 bridges have been built with external tendons, first in France and soon gaining traction in other countries. FIP published a state-of the-art report in May 1996 to provide a review of the application of external tendons, describing specific material problems and methods for dealing with them. 25 years have passed and, while the engineering principles covered by the FIP report remain unchanged, the context has evolved: - External tendons and construction methods have kept evolving with better materials, ever longer spans, and tighter schedules. - Normalization frame in Europe changed, Severe durability issues have occurred in some countries from which the industry can extract good knowledge of the causes and how to avoid similar problems in the future. This new fib bulletin has been prepared with the aim to reflect the current state of the art and encompass the knowledge amassed in the last quarter of century with chapters covering from the design and approval of systems and materials to installation, quality control and monitoring. The last chapter is a compilation of structures worldwide covering all sorts of materials, typologies and construction methods, which might be a source of inspiration for owners and designers alike.
Guidelines for Submerged Floating Tube Bridges by FIB – International Federation for Structural Concrete Pdf
This bulletin is a guidelines document for “Submerged Floating Tube Bridges”, that represents an innovation in Marine Concrete Structures. This theme is considered important for Commission 1 since in the future several applications are forecast in marine environments. Submerged Floating Tube Bridges are a solution that can be proposed to solve different problems in passing water constrains as lakes and fiords, reducing the impact and allowing several economic advantages. The guidelines certainly will boost the application of Submerged Floating Tube Bridges since the document is useful not only for designers but also for construction companies, owners and public administrations. As guidelines, the bulletin gives wide information on the design, construction and management of these structures, allowing all the users to be confident in promoting the use of Submerged Floating Tube Bridges.
Fibre Reinforced Concrete: From Design to Structural Applications by FIB – International Federation for Structural Concrete Pdf
The first international FRC workshop supported by RILEM and ACI was held in Bergamo (Italy) in 2004. At that time, a lack of specific building codes and standards was identified as the main inhibitor to the application of this technology in engineering practice. The workshop aim was placed on the identification of applications, guidelines, and research needs in order for this advanced technology to be transferred to professional practice. The second international FRC workshop, held in Montreal (Canada) in 2014, was the first ACI-fib joint technical event. Many of the objectives identified in 2004 had been achieved by various groups of researchers who shared a common interest in extending the application of FRC materials into the realm of structural engineering and design. The aim of the workshop was to provide the State-of-the-Art on the recent progress that had been made in term of specifications and actual applications for buildings, underground structures, and bridge projects worldwide. The rapid development of codes, the introduction of new materials and the growing interest of the construction industry suggested presenting this forum at closer intervals. In this context, the third international FRC workshop was held in Desenzano (Italy), four years after Montreal. In this first ACI-fib-RILEM joint technical event, the maturity gained through the recent technological developments and large-scale applications were used to show the acceptability of the concrete design using various fibre compositions. The growing interests of civil infrastructure owners in ultra-high-performance fibre-reinforced concrete (UHPFRC) and synthetic fibres in structural applications bring new challenges in terms of concrete technology and design recommendations. In such a short period of time, we have witnessed the proliferation of the use of fibres as structural reinforcement in various applications such as industrial floors, elevated slabs, precast tunnel lining sections, foundations, as well as bridge decks. We are now moving towards addressing many durability-based design requirements by the use of fibres, as well as the general serviceability-based design. However, the possibility of having a residual tensile strength after cracking of the concrete matrix requires a new conceptual approach for a proper design of FRC structural elements. With such a perspective in mind, the aim of FRC2018 workshop was to provide the State-of-the-Art on the recent progress in terms of specifications development, actual applications, and to expose users and researchers to the challenges in the design and construction of a wide variety of structural applications. Considering that at the time of the first workshop, in 2004, no structural codes were available on FRC, we have to recognize the enormous work done by researchers all over the world, who have presented at many FRC events, and convinced code bodies to include FRC among the reliable alternatives for structural applications. This will allow engineers to increasingly utilize FRC with confidence for designing safe and durable structures. Many presentations also clearly showed that FRC is a promising material for efficient rehabilitation of existing infrastructure in a broad spectrum of repair applications. These cases range from sustained gravity loads to harsh environmental conditions and seismic applications, which are some of the broadest ranges of applications in Civil Engineering. The workshop was attended by researchers, designers, owner and government representatives as well as participants from the construction and fibre industries. The presence of people with different expertise provided a unique opportunity to share knowledge and promote collaborative efforts. These interactions are essential for the common goal of making better and sustainable constructions in the near future. The workshop was attended by about 150 participants coming from 30 countries. Researchers from all the continents participated in the workshop, including 24 Ph.D. students, who brought their enthusiasm in FRC structural applications. For this reason, the workshop Co-chairs sincerely thank all the enterprises that sponsored this event. They also extend their appreciation for the support provided by the industry over the last 30 years which allowed research centers to study FRC materials and their properties, and develop applications to making its use more routine and accepted throughout the world. Their important contribution has been essential for moving the knowledge base forward. Finally, we appreciate the enormous support received from all three sponsoring organizations of ACI, fib and Rilem and look forward to paving the path for future collaborations in various areas of common interest so that the developmental work and implementation of new specifications and design procedures can be expedited internationally.
Conceptual Design of Precast Concrete Bridge Superstructures by FIB – International Federation for Structural Concrete Pdf
Concrete bridges are an important part of today's road infrastructure. An important part of those concrete bridges is to a large extent prefabricated. Precast concrete enables all the advantages of an industrialized process to be fully utilized. Contemporary concrete mixtures are used to realize high-strength bridge girders and piers that exactly meet the requirements set, both structurally and aesthetically, with a small ecological footprint. Sustainable and durable! On the construction site, there is no need for complex formwork, the execution time is drastically reduced and where road, water and rail traffic on or under the bridge has to be temporarily interrupted, it is only minimally inconvenienced during the execution of the project. Bridges capture the imagination. In addition to their pure functionality, overcoming a height difference, they offer designers unprecedented opportunities to shape their creativity, including when using precast concrete. This bulletin, prepared by the experts of Task Group 6.5 'Precast concrete bridges', takes a closer look at the conceptual (preliminary) design of prefabricated concrete bridges. The bulletin does not have the ambition to define the umbrella term 'conceptual design' but shows in a pragmatic way, using 24 examples spread all over the world, how leading designers use this methodology to select from the many possibilities to arrive at an ideal solution taking into account all design conditions. One often reads that experience is a necessary condition for good conceptual design. The pooled knowledge and experience in this bulletin already provide the reader with a good head start. Commission 6 thanks the former convener of the Task Group Hugo Corres, editor of this document, and the current co-conveners Marcello Waimberg and Ken-ichi Kata as well as all active members of the Task Group for sharing their knowledge and experience and for the successful realization of this bulletin.
Birth Certificate and Through-Life Management Documentation by FIB – International Federation for Structural Concrete Pdf
While it is generally accepted by owners and users that vehicles such as airplanes or cars must be subjected to a pre-defined maintenance plan during their lifetime, this is less obvious in public opinion for engineering structures and buildings. This may be related to the general feeling that “moving objects” should be more sensitive to aging and deterioration than “structures anchored in ground”! This may also relate to the fact that detailed maintenance manuals, which are considered obligatory by insurance companies, are generally for aircraft, boats and cars, but not systematically for civil engineering structures, except for iconic or major projects. The performance-based approach to the durability design and assessment of concrete structures is also becoming increasingly popular in the construction sector. In recent years, numerous studies have been carried out worldwide in order to better assess the expected properties related to the durability of concrete. This has led to the standardization of test protocols, but also to a better understanding of the main parameters impacting the overall durability of concrete. Documentation related to durability indicators will then become increasingly necessary for the accurate implementation of a performance-based approach that enables the promotion of sustainable materials. Durability models have a strong need for relevant in-field data feedback in order to define accurate inputs for modelling both during the design process (gathered from previous projects) and during the follow-up process to allow for re-calibration of inputs and re-assessment of durability expectations by the models if judged necessary. A framework for data collection was therefore considered extremely importance by the fib Commission 8: Durability, and is the objective of this fib Technical report “Birth-certificate and Through-Life Management Documentation”. It is indeed very important to collect relevant data within a comprehensive and standardized format, as now proposed by this fib Bulletin. Thanks to its pre-defined format, compatible with the general fib framework, “Birth-certificate and Through-Life Management Documentation” will definitively be useful to owners for the maintenance plan and intervention strategies of their assets. This operational technical report will also be very useful for designers, as it should encourage the collection of relevant information in databases to be used for future projects where a realistic assessment of expected properties is considered through largely similar concrete mix designs under given exposure conditions. The Commission, which deals with durability aspects, hopes that this Bulletin will provide users a valuable tool and perspective on service life management issues.