A Trade Off Optimization Model Of Environment Impact And Manufacturing Cost For Machining Parts

Author : Lei Zhang,Kaibo Tao,Yu Zheng,Kuankuan Zhu,Junwei Fang,Jin Su
Publisher : OAE Publishing Inc.
Page : 26 pages
File Size : 46,9 Mb
Release : 2024-03-21
Category : Technology & Engineering
ISBN : 8210379456XXX

Get Book

A trade-off optimization model of environment impact and manufacturing cost for machining parts by Lei Zhang,Kaibo Tao,Yu Zheng,Kuankuan Zhu,Junwei Fang,Jin Su Pdf

Motivation: Throughout the life cycle, the environmental impact and manufacturing costs of a part are largely determined at the design stage. Therefore, a part design optimization method considering these two factors is proposed in this paper. At the same time, the comprehensive benefit is taken as the trade-off of these two factors. The reduction of the comprehensive benefit indicates that the optimized part has achieved better environmental and economic performance results. Methods: Firstly, the model is reconstructed using the dimension-driven method, and the feature information of the new part is extracted. Then, machining process planning is carried out based on the feature information. Secondly, a design optimization model for the comprehensive benefit is established based on the genetic algorithm. The model takes the dimension parameters of the part as the optimization variables and the reduction of the comprehensive benefit as the optimization objective. With the help of the Simulation plug-in for SolidWorks, the static analysis of the optimized model is conducted to determine whether it meets the performance requirements. Finally, the design optimization prototype system oriented to comprehensive benefit is established. The feasibility and effectiveness of the proposed method are verified by taking the intermediate shaft of the belt conveyor reducer-sixth order step shaft as an example. Results: The case study shows that the optimization result of comprehensive benefit is 1.63%, which verifies the feasibility and effectiveness of the part design optimization method proposed in this paper.

Author : Mahendra Hundal
Publisher : CRC Press
Page : 601 pages
File Size : 43,9 Mb
Release : 2001-09-11
Category : Technology & Engineering
ISBN : 9780824745028

Get Book

Mechanical Life Cycle Handbook by Mahendra Hundal Pdf

"Explains how Design for the Environment (SFE) and Life Cycle Engineering (LCE) processes may be integrated into business an dmanufacturing practices. Examines major environmental laws and regulations in the U.S. and Europe, qualitative and quantitative analyses of ""green design"" decision variables, and heuristic search programs for a proactive future in ecological improvement."

Author : J. Paulo Davim
Publisher : Springer
Page : 82 pages
File Size : 53,6 Mb
Release : 2017-03-19
Category : Technology & Engineering
ISBN : 9783319519616

Get Book

Sustainable Machining by J. Paulo Davim Pdf

This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

Author : Ashok Kumar Sahoo,Ramanuj Kumar,Amlana Panda
Publisher : CRC Press
Page : 234 pages
File Size : 46,9 Mb
Release : 2024-07-18
Category : Technology & Engineering
ISBN : 9781040086773

Get Book

Sustainable Hard Machining by Ashok Kumar Sahoo,Ramanuj Kumar,Amlana Panda Pdf

Sustainable Hard Machining: Implementation and Assessment analyzes the various methodologies of cooling and lubrication employed during hard machining operations, along with their potential contributions towards achieving sustainable machining. It includes the needs, challenges and trends towards sustainable hard machining of difficult-to-cut materials through the application of dry, minimum quantity lubrication (MQL), cryogenic and nanofluid assisted MQL for environmental, economic, ecological and societal benefits, leading to environmentally cleaner sustainable machining. Features: Provides an introduction to hard machining, sustainability and environmentally conscious machining Discusses dry and minimum quantity lubrication (MQL) based hard machining Includes computational methods and optimization in hard machining Reviews nano-cutting fluids in hard machining Explores cryogenic cooling in hard machining This book is aimed at graduate students and researchers in mechanical engineering, manufacturing and materials science.

Author : Jürgen Hesselbach,Christoph Herrmann
Publisher : Springer Science & Business Media
Page : 699 pages
File Size : 50,6 Mb
Release : 2011-03-19
Category : Technology & Engineering
ISBN : 9783642196928

Get Book

Glocalized Solutions for Sustainability in Manufacturing by Jürgen Hesselbach,Christoph Herrmann Pdf

The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.

Author : Dimitris Kiritsis (Kyritsis),Gökan May
Publisher : MDPI
Page : 158 pages
File Size : 44,7 Mb
Release : 2019-08-14
Category : Technology & Engineering
ISBN : 9783039212019

Get Book

Smart Sustainable Manufacturing Systems by Dimitris Kiritsis (Kyritsis),Gökan May Pdf

With the advent of disruptive digital technologies, companies are facing unprecedented challenges and opportunities. Advanced manufacturing systems are of paramount importance in making key enabling technologies and new products more competitive, affordable, and accessible, as well as for fostering their economic and social impact. The manufacturing industry also serves as an innovator for sustainability since automation coupled with advanced manufacturing technologies have helped manufacturing practices transition into the circular economy. To that end, this Special Issue of the journal Applied Sciences, devoted to the broad field of Smart Sustainable Manufacturing Systems, explores recent research into the concepts, methods, tools, and applications for smart sustainable manufacturing, in order to advance and promote the development of modern and intelligent manufacturing systems. In light of the above, this Special Issue is a collection of the latest research on relevant topics and addresses the current challenging issues associated with the introduction of smart sustainable manufacturing systems. Various topics have been addressed in this Special Issue, which focuses on the design of sustainable production systems and factories; industrial big data analytics and cyberphysical systems; intelligent maintenance approaches and technologies for increased operating life of production systems; zero-defect manufacturing strategies, tools and methods towards online production management; and connected smart factories.

Author : Anonim
Publisher : DIANE Publishing
Page : 108 pages
File Size : 48,6 Mb
Release : 2024-07-01
Category : Electronic
ISBN : 9781428982307

Get Book

PM: Program Manager (Online) November December 2000 Issue by Anonim Pdf

Author : Anonim
Publisher : Unknown
Page : 1346 pages
File Size : 43,9 Mb
Release : 1985
Category : Aeronautics
ISBN : UIUC:30112075701224

Get Book

Scientific and Technical Aerospace Reports by Anonim Pdf

Author : Joseph Berk
Publisher : John Wiley & Sons
Page : 272 pages
File Size : 49,9 Mb
Release : 2010-02-22
Category : Science
ISBN : 9780470643808

Get Book

Cost Reduction and Optimization for Manufacturing and Industrial Companies by Joseph Berk Pdf

Focuses on rapid implementation of practical, real-world cost reduction solutions In today's economic climate, the need to cut costs can be the difference between success and failure. Cost Reduction and Optimization for Manufacturing and Industrial Companies covers all major cost reduction areas, providing easy to read examples and advice on steps to take. It provides the roadmap for implementing recommended actions with true and tried methods by taking a modern, all-inclusive look at manufacturing processes. Based on the author's cost reduction experience gained during 30 years of senior operations and consulting engagements with hundreds of organizations, this book includes easy-to-understand and easy-to-implement cost reduction concepts organized into five general areas --labor, material, design, process, and overhead. Each chapter: Dives into a cost reduction area and starts with the bottom line first by summarizing key points Provides proven tactics for cutting costs without a lot of extraneous data Follows a qualitative and design-oriented approach Emphasizes quick implementation and measurable cost reduction Identifies who in the organization should do the work Outlines risks and suggested risk mitigation actions Contains numerous tables, graphs, and photos to show the concepts described in the book Praise for Cost Reduction and Optimization for Manufacturing and Industrial Companies "In this introductory book, Berk not only takes a modern, all-inclusive look at manufacturing processes but also provides substantial coverage of engineering materials and production systems. It follows a more qualitative and design-oriented approach than other texts in the market, helping readers gain a better understanding of important concepts. They'll also discover how micro-economic conditions relate to the process variables in a given process as well as how to perform manufacturing science and quantitative engineering analysis of manufacturing processes." —Fred Silverman, Director Engineering of Hi-Shear Technology Corporation "Joe Berk has created a unique, practical and straightforward approach to cost reduction in manufacturing. This work provides valuable insights and concrete techniques, based on real-world experiences, to any manufacturing organization undertaking change to position itself to compete successfully in the global marketplace." —Joe Carleone, President and COO of American Pacific Corporation Check out author Joseph Berk's blog at http://manufacturingtraining.wordpress.com/

Author : Edward J. Haug
Publisher : Unknown
Page : 144 pages
File Size : 42,6 Mb
Release : 1990
Category : Technology & Engineering
ISBN : UOM:39015019577405

Get Book

Concurrent Engineering of Mechanical Systems by Edward J. Haug Pdf

Author : Prof Florinda Matos
Publisher : Academic Conferences and publishing limited
Page : 128 pages
File Size : 51,6 Mb
Release : 2021-11-18
Category : Computers
ISBN : 9781914587238

Get Book

ECIAIR 2021 3rd European Conference on the Impact of Artificial Intelligence and Robotics   by Prof Florinda Matos Pdf

Author : Bandar AlMangour
Publisher : Springer
Page : 355 pages
File Size : 42,7 Mb
Release : 2018-08-01
Category : Technology & Engineering
ISBN : 9783319917139

Get Book

Additive Manufacturing of Emerging Materials by Bandar AlMangour Pdf

This book provides a solid background for understanding the immediate past, the ongoing present, and the emerging trends of additive manufacturing, with an emphasis on innovations and advances in its use for a wide spectrum of manufacturing applications. It contains contributions from leading authors in the field, who view the research and development progress of additive manufacturing techniques from the unique angle of developing high-performance composites and other complex material parts. It is a valuable reference book for scientists, engineers, and entrepreneurs who are seeking technologically novel and economically viable innovations for high-performance materials and critical applications. It can also benefit graduate students and post-graduate fellows majoring in mechanical, manufacturing, and material sciences, as well as biomedical engineering.

Author : Andrew Y. C. Nee,Bin Song,Soh-Khim Ong
Publisher : Springer Science & Business Media
Page : 719 pages
File Size : 47,9 Mb
Release : 2013-04-08
Category : Technology & Engineering
ISBN : 9789814451482

Get Book

Re-engineering Manufacturing for Sustainability by Andrew Y. C. Nee,Bin Song,Soh-Khim Ong Pdf

This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing, etc.

Author : Anonim
Publisher : Unknown
Page : 390 pages
File Size : 54,6 Mb
Release : 1994
Category : Mechanics, Applied
ISBN : OSU:32435051265205

Get Book

Applied Mechanics Reviews by Anonim Pdf

Author : Society of Automotive Engineers
Publisher : Unknown
Page : 300 pages
File Size : 48,9 Mb
Release : 1969
Category : Aeronautics
ISBN : UOM:39015036237843

Get Book

SAE Transactions by Society of Automotive Engineers Pdf

Beginning in 1985, one section is devoted to a special topic