Advancement Of Selective Laser Melting By Laser Beam Shaping

Author : Tim Marten Wischeropp
Publisher : Unknown
Page : 0 pages
File Size : 40,6 Mb
Release : 2021
Category : Electronic
ISBN : 3662645866

Get Book

Advancement of Selective Laser Melting by Laser Beam Shaping by Tim Marten Wischeropp Pdf

Selective Laser Melting (SLM), also referred to as Laser Powder Bed Fusion (L-PBF), offers significant advantages for the manufacturing of complex, high-quality parts. However, its market share is still small compared to conventional manufacturing technologies. Major drawbacks hindering an industrial ramp-up are low productivity, high part costs and issues with quality and reproducibility. Comprehensive research has been done to overcome these challenges, but little attention has been paid to addressing them by optimizing the laser beam profile. Therefore, the author examines the effect of the laser beam profile on the productivity and process stability through both numerical and experimental investigations. The results show clear advantages an optimized laser beam profile offers. The content First comprehensive research on the effect of the laser beam profile on SLM process Understand the effect of the laser beam profile on the process stability and feasible productivity of the SLM process Discover the benefits in terms of manufacturing costs and time that are offered by an optimized laser beam profile The author Tim Marten Wischeropp studied mechanical engineering at the Technical University of Hamburg (TUHH), Germany. After graduating with a focus on product development, he worked as a research fellow at the Institute of Laser and System Technologies (TUHH) as well as group leader for 3D printing at the LZN Laser Zentrum Nord GmbH. Since 2018 he leads the design department at the Fraunhofer Institution for Additive Manufacturing Technologies IAPT.

Author : Tim Marten Wischeropp
Publisher : Springer Nature
Page : 200 pages
File Size : 42,6 Mb
Release : 2021-11-30
Category : Technology & Engineering
ISBN : 9783662645857

Get Book

Advancement of Selective Laser Melting by Laser Beam Shaping by Tim Marten Wischeropp Pdf

Selective Laser Melting (SLM), also referred to as Laser Powder Bed Fusion (L-PBF), offers significant advantages for the manufacturing of complex, high-quality parts. However, its market share is still small compared to conventional manufacturing technologies. Major drawbacks hindering an industrial ramp-up are low productivity, high part costs and issues with quality and reproducibility. Comprehensive research has been done to overcome these challenges, but little attention has been paid to addressing them by optimizing the laser beam profile. Therefore, the author examines the effect of the laser beam profile on the productivity and process stability through both numerical and experimental investigations. The results show clear advantages an optimized laser beam profile offers.

Author : Fred M. Dickey
Publisher : CRC Press
Page : 589 pages
File Size : 49,5 Mb
Release : 2018-09-03
Category : Technology & Engineering
ISBN : 9781466561014

Get Book

Laser Beam Shaping by Fred M. Dickey Pdf

Laser Beam Shaping: Theory and Techniques addresses the theory and practice of every important technique for lossless beam shaping. Complete with experimental results as well as guidance on when beam shaping is practical and when each technique is appropriate, the Second Edition is updated to reflect significant developments in the field. This authoritative text: Features new chapters on axicon light ring generation systems, laser-beam-splitting (fan-out) gratings, vortex beams, and microlens diffusers Describes the latest advances in beam profile measurement technology and laser beam shaping using diffractive diffusers Contains new material on wavelength dependence, channel integrators, geometrical optics, and optical software Laser Beam Shaping: Theory and Techniques, Second Edition not only provides a working understanding of the fundamentals, but also offers insight into the potential application of laser-beam-profile shaping in laser system design.

Author : Fred M. Dickey,Todd E. Lizotte,Scott C. Holswade,David L. Shealy
Publisher : CRC Press
Page : 341 pages
File Size : 41,8 Mb
Release : 2018-10-03
Category : Science
ISBN : 9781351836807

Get Book

Laser Beam Shaping Applications by Fred M. Dickey,Todd E. Lizotte,Scott C. Holswade,David L. Shealy Pdf

The practice of shaping the irradiance profile of laser beams goes back more than three decades, and the applications of beam shaping are as diverse as they are numerous. However, until Dickey and Holswade's groundbreaking and highly popular Laser Beam Shaping: Theory and Techniques was published, there was no single, detailed treatment available on the underlying theory and basic techniques of beam shaping. Building on the foundations of this previous work, these esteemed editors have teamed with recognized expert David L. Shealy to produce the first in-depth account of beam shaping applications and design. Laser Beam Shaping Applications details the important features of beam shaping and exposes the subtleties of the theory and techniques that are best demonstrated through proven applications. In chapters contributed by prominent, active leaders in their respective specialties, the book discusses applications in lithography, laser printing, optical data storage, stable isotope separation, adaptive mirrors, and spatially dispersive lasers. The contributors share major insights, knowledge, and experience, reveal the advantages of the technologies, and include extensive references to the literature. The book concludes with a summary of beam shaping theory and techniques as well as the history of the field. Providing practical expertise, Laser Beam Shaping Applications is an extremely helpful guide to improving current laser processes, optimizing application-specific technologies, and advancing future development in the field.

Author : Prashanth Konda Gokuldoss
Publisher : MDPI
Page : 98 pages
File Size : 55,5 Mb
Release : 2020-04-03
Category : Technology & Engineering
ISBN : 9783039285785

Get Book

Selective Laser Melting by Prashanth Konda Gokuldoss Pdf

Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers, and scientists. AM has the ability to fabricate materials to produce parts with complex shapes without any theoretical restrictions combined with added functionalities. Selective laser melting (SLM), also known as laser-based powder bed processing (LPBF), is one of the main AM process that can be used to fabricate wide variety of materials that are Al-, Ti-, Fe-, Ni-, Co-, W-, Ag-, and Au-based, etc. However, several challenges need to be addressed systematically, such as development of new materials that suit the SLM process conditions so the process capabilities can be fully used to produce new properties in these materials. Other issues in the field are the lack of microstructure–property correlations, premature failure, etc. Accordingly, this Special Issue (book) focuses mainly on the microstructure-correlation in three different alloys: AlSi10Mg, Ti6Al4V, and 304L stainless steel, where six articles are presented. Hence, this Special Issue outlines microstructure–property correlations in the SLM processed materials and provides a value addition to the field of AM.

Author : Tomasz Tański,Przemysław Snopiński
Publisher : Trans Tech Publications Ltd
Page : 192 pages
File Size : 48,6 Mb
Release : 2020-07-24
Category : Technology & Engineering
ISBN : 9783035736526

Get Book

Advances in Laser and Surface Material Processing by Tomasz Tański,Przemysław Snopiński Pdf

Special topic volume with invited peer-reviewed papers only

Author : Francisco J. G. Silva,António B. Pereira,Raul D. S. G. Campilho
Publisher : Springer Nature
Page : 954 pages
File Size : 42,5 Mb
Release : 2023-08-23
Category : Technology & Engineering
ISBN : 9783031382413

Get Book

Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems by Francisco J. G. Silva,António B. Pereira,Raul D. S. G. Campilho Pdf

This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 – 22, 2023, in Porto, Portugal, this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas.

Author : Igor Yadroitsev,Ina Yadroitsava,Anton Du Plessis,Eric MacDonald
Publisher : Elsevier
Page : 678 pages
File Size : 40,5 Mb
Release : 2021-05-23
Category : Technology & Engineering
ISBN : 9780128240915

Get Book

Fundamentals of Laser Powder Bed Fusion of Metals by Igor Yadroitsev,Ina Yadroitsava,Anton Du Plessis,Eric MacDonald Pdf

Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. Presents laser powder bed fusion fundamentals, as well as their inherent challenges Provides an up-to-date summary of this advancing technology and its potential Provides a comprehensive textbook for universities, as well as a reference for industry Acts as quick-reference guide

Author : Dmitriy Mikhaylov
Publisher : Cuvillier Verlag
Page : 176 pages
File Size : 45,7 Mb
Release : 2021-06-24
Category : Technology & Engineering
ISBN : 9783736964464

Get Book

Ultrashort Pulse Laser Ablation of Bulk Materials Using Shaped Laser Beams by Dmitriy Mikhaylov Pdf

High precision, high quality, and high throughput of ultrashort pulse laser ablation of bulk material are the most demanded properties that are required to let this process technology compete with other micro-machining techniques. Previous attempts to increase volumetric ablation rates of ultrashort pulse laser processes were based on the increase of fluence or pulse repetition rates. They run into limitations mainly set by the occurrence of bumpy surfaces due to overheating of bulk material. In this work, the potential of laser beam shaping for the enhancement of ablation rates is studied systematically for the first time. The question regarding the physically shortest possible process time for ablation of 2.5D-structures by means of an ultrashort pulse laser is answered using a heat conduction model, which is extended by the ability to consider spatially shaped beams. The strategy of laser beam stamping is implemented in a novel optical setup and proven both theoretically and experimentally to have a great potential for increasing ablation rates.

Author : Fred M. Dickey,Scott C. Holswade
Publisher : Unknown
Page : 428 pages
File Size : 50,5 Mb
Release : 2000
Category : Beam optics
ISBN : OCLC:301083509

Get Book

Laser Beam Shaping by Fred M. Dickey,Scott C. Holswade Pdf

Author : Dongdong Gu
Publisher : Springer
Page : 311 pages
File Size : 44,8 Mb
Release : 2015-04-21
Category : Technology & Engineering
ISBN : 9783662460894

Get Book

Laser Additive Manufacturing of High-Performance Materials by Dongdong Gu Pdf

This book entitled “Laser Additive Manufacturing of High-Performance Materials” covers the specific aspects of laser additive manufacturing of high-performance new materials components based on an unconventional materials incremental manufacturing philosophy, in terms of materials design and preparation, process control and optimization and theories of physical and chemical metallurgy. This book describes the capabilities and characteristics of the development of new metallic materials components by laser additive manufacturing process, including nanostructured materials, in situ composite materials, particle reinforced metal matrix composites, etc. The topics presented in this book, similar as laser additive manufacturing technology itself, show a significant interdisciplinary feature, integrating laser technology, materials science, metallurgical engineering and mechanical engineering. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), PR China.

Author : Pankaj Kumar,Manowar Hussain,Amit Kumar Jain,Sunil Pathak
Publisher : CRC Press
Page : 258 pages
File Size : 40,5 Mb
Release : 2023-12-22
Category : Technology & Engineering
ISBN : 9781003826910

Get Book

Laser Applications in Manufacturing by Pankaj Kumar,Manowar Hussain,Amit Kumar Jain,Sunil Pathak Pdf

This book introduces the emerging areas of laser-based manufacturing such as additive manufacturing (AM) of metal matrix composites (MMCs), joining of hard-to-weld superalloys, damage-free machining of fiber-reinforced composites, surface properties enhancement using cladding techniques, and modeling and simulation of laser beam manufacturing techniques. Laser Applications in Manufacturing provides a quick guide for researchers and academicians to recent advancements in the development of powder-based MMCs manufactured using AM technology. This book: shows recent developments in functionally graded sheets or laminates and fabrication of fiber-reinforced composite using sheet lamination printing lists recent developments in the joining of dissimilar materials in diverse applications such as hybrid structures and lightweight components for increased performance and functionality includes many recent developments in machining carbon fiber, glass fiber, and natural fiber composite laminates for investigations of delamination and surface quality characteristics showcases different aspects of surface alloying of miniature components, hard and soft composite coating for various applications. Laser Applications in Manufacturing is recommended for researchers working on fabrication of numerous new and novel materials. The book serves as a resource for scientists and engineers working in laser-based manufacturing techniques who want to learn about the most up-to-date research.

Author : Anonim
Publisher : Unknown
Page : 128 pages
File Size : 41,5 Mb
Release : 2006
Category : Beam optics
ISBN : OCLC:1011946945

Get Book

Laser Beam Shaping VII by Anonim Pdf

Author : Di Wang,Yongqiang Yang,Yang Liu,Yuchao Bai,Chaolin Tan
Publisher : Springer Nature
Page : 302 pages
File Size : 45,9 Mb
Release : 2023-10-06
Category : Technology & Engineering
ISBN : 9789819955138

Get Book

Laser Powder Bed Fusion of Additive Manufacturing Technology by Di Wang,Yongqiang Yang,Yang Liu,Yuchao Bai,Chaolin Tan Pdf

This book systematically introduces the powder bed laser melting technology and its application and summarizes the author's team's experience in scientific research, engineering development, and data accumulation in recent 15 years. It includes in-depth theoretical analysis and a lot of engineering experience in equipment debugging, process development, and material testing. The book takes the powder bed laser melting technology as the object and divides the content into 15 chapters. It is used as technical learning materials for researchers and engineering development personnel engaged in metal 3D printing.

Author : Anonim
Publisher : Unknown
Page : 210 pages
File Size : 45,7 Mb
Release : 2001
Category : Beam optics
ISBN : UOM:39015047822641

Get Book

Laser Beam Shaping by Anonim Pdf