Centrifuge Modelling For Civil Engineers

Author : Gopal Madabhushi
Publisher : CRC Press
Page : 328 pages
File Size : 55,5 Mb
Release : 2017-09-06
Category : Technology & Engineering
ISBN : 9781351988841

Get Book

Centrifuge Modelling for Civil Engineers by Gopal Madabhushi Pdf

Solve Complex Ground and Foundation Problems Presenting more than 25 years of teaching and working experience in a wide variety of centrifuge testing, the author of Centrifuge Modelling for Civil Engineers fills a need for information about this field. This text covers all aspects of centrifuge modelling. Expertly explaining the basic principles, the book makes this technique accessible to practicing engineers and researchers. Appeals to Non-Specialists and Specialists Alike Civil engineers that are new to the industry can refer to this material to solve complex geotechnical problems. The book outlines a generalized design process employed for civil engineering projects. It begins with the basics, and then moves on to increasingly complex methods and applications including shallow foundations, retaining walls, pile foundations, tunnelling beneath existing pile foundations, and assessing the stability of buildings and their foundations following earthquake-induced soil liquefaction. It addresses the use of modern imaging technique, data acquisition, and modelling techniques. It explains the necessary signal processing tools that are used to decipher centrifuge test data, and introduces the reader to the specialist aspects of dynamic centrifuge modelling used to study dynamic problems such as blast, wind, or wave loading with emphasis on earthquake engineering including soil liquefaction problems. Introduces the equipment and instrumentation used in centrifuge testing Presents in detail signal processing techniques such as smoothing and filtering Provides example centrifuge data that can be used for sample analysis and interpretation Centrifuge Modelling for Civil Engineers effectively describes the equipment, instrumentation, and signal processing techniques required to make the best use of the centrifuge modelling and test data. This text benefits graduate students, researchers, and practicing civil engineers involved with geotechnical issues.

Author : Devendra Damale
Publisher : Unknown
Page : 0 pages
File Size : 48,8 Mb
Release : 2015-03
Category : Centrifuges
ISBN : 1681170140

Get Book

Centrifuge Modelling for Civil Engineers by Devendra Damale Pdf

Centrifuge modelling involves testing of small scale models in the enhanced gravity field of a geotechnical Method centrifuge. This technique is particularly useful in testing materials such as soils which exhibit non-linear stress-strain behaviour and can suffer significant plastic strains. Centrifuge modelling is proven to be particularly effective in determining the failure mechanisms for a wide variety of geotechnical problems. The scale model is typically constructed in the laboratory and then loaded onto the end of the centrifuge, which is typically between 0.2 and 10 metres (0.7 and 32.8 ft) in radius. The purpose of spinning the models on the centrifuge is to increase the g-forces on the model so that stresses in the model are equal to stresses in the prototype.

Author : Bill Addis,Karl-Eugen Kurrer,Werner Lorenz
Publisher : John Wiley & Sons
Page : 70 pages
File Size : 43,8 Mb
Release : 2020-11-02
Category : Technology & Engineering
ISBN : 9783433032572

Get Book

Physical Models by Bill Addis,Karl-Eugen Kurrer,Werner Lorenz Pdf

Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.

Author : David Muir Wood
Publisher : CRC Press
Page : 504 pages
File Size : 42,6 Mb
Release : 2017-12-21
Category : Science
ISBN : 9781351990042

Get Book

Geotechnical Modelling by David Muir Wood Pdf

Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.

Author : S. Springman
Publisher : CRC Press
Page : 408 pages
File Size : 42,7 Mb
Release : 2002-01-01
Category : Technology & Engineering
ISBN : 9058093611

Get Book

Constitutive and Centrifuge Modelling: Two Extremes by S. Springman Pdf

The extremes of constitutive and centrifuge modelling are explored here, with a range of lectures addressing specific areas of these two types of modelling as well as on specific design problems and the themes of failure, deformations and interfaces.

Author : W.H. Craig,R.G. James,A.N. Schofield
Publisher : CRC Press
Page : 275 pages
File Size : 40,5 Mb
Release : 2020-08-26
Category : Technology & Engineering
ISBN : 9781000108422

Get Book

Centrifuges in Soil Mechanics by W.H. Craig,R.G. James,A.N. Schofield Pdf

This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.

Author : P. Guo,R. Phillips,R. Popescu
Publisher : Taylor & Francis
Page : 1046 pages
File Size : 43,7 Mb
Release : 2022-11-22
Category : Technology & Engineering
ISBN : 9781351424615

Get Book

Physical Modelling in Geotechnics by P. Guo,R. Phillips,R. Popescu Pdf

Papers cover topics including: physical modelling facilities; experimental advances; seismic experimental advances; education; soil behaviour; offshore systems; cold regions; geo-environment; dynamics; earthquake effects; and strategies for disaster reduction.

Author : R.N. Taylor
Publisher : CRC Press
Page : 326 pages
File Size : 43,7 Mb
Release : 2003-09-02
Category : Architecture
ISBN : 9780203210536

Get Book

Geotechnical Centrifuge Technology by R.N. Taylor Pdf

This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.

Author : Christophe Gaudin,David White
Publisher : CRC Press
Page : 1366 pages
File Size : 48,9 Mb
Release : 2019-01-08
Category : Technology & Engineering
ISBN : 9781315776873

Get Book

ICPMG2014 - Physical Modelling in Geotechnics by Christophe Gaudin,David White Pdf

The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.

Author : Mosaid M. Al-Hussaini
Publisher : Unknown
Page : 54 pages
File Size : 40,5 Mb
Release : 1976
Category : Centrifuges
ISBN : UOM:39015086528281

Get Book

Centrifuge Model Testing of Soils by Mosaid M. Al-Hussaini Pdf

Author : Andrew McNamara,Sam Divall,Richard Goodey,Neil Taylor,Sarah Stallebrass,Jignasha Panchal
Publisher : CRC Press
Page : 708 pages
File Size : 51,6 Mb
Release : 2018-07-11
Category : Technology & Engineering
ISBN : 9780429797620

Get Book

Physical Modelling in Geotechnics, Volume 2 by Andrew McNamara,Sam Divall,Richard Goodey,Neil Taylor,Sarah Stallebrass,Jignasha Panchal Pdf

Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.

Author : Bill Addis,Karl-Eugen Kurrer,Werner Lorenz
Publisher : John Wiley & Sons
Page : 1114 pages
File Size : 55,9 Mb
Release : 2020-09-25
Category : Technology & Engineering
ISBN : 9783433609620

Get Book

Physical Models by Bill Addis,Karl-Eugen Kurrer,Werner Lorenz Pdf

Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.

Author : American Society of Civil Engineers. Geotechnical Engineering Division
Publisher : Unknown
Page : 934 pages
File Size : 51,7 Mb
Release : 1981
Category : Engineering geology
ISBN : UOM:39015012683291

Get Book

Journal of the Geotechnical Engineering Division by American Society of Civil Engineers. Geotechnical Engineering Division Pdf

Author : Taro Arikawa
Publisher : CRC Press
Page : 251 pages
File Size : 53,5 Mb
Release : 2024-04-17
Category : Technology & Engineering
ISBN : 9781003814719

Get Book

Theory and Application of Hydraulic Modeling by Taro Arikawa Pdf

This edited volume from Japan’s Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments presents readers with a state-of-the-art overview of experimental and computational methods used to address similarity scaling incompatibilities present in fluid–sediment flows. Readers will gain an understanding of complex phenomena in the boundary fields of hydraulics and geotechnical engineering. Chapter contributors focus on the phenomena that are affected by the interactions between fluid wave and ground in a complex field, which for many years have been challenging to process and model. In addition to describing the implementation of model tests and the concept of the law of similarity, this book contrasts these phenomena with the laws of similarity, describes models and numeral analysis methods, and explains important considerations using experimental case studies. Each chapter is written by leading researchers in Japan who are members of the Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments. The chapters are closely linked but are written so that each can be read individually. Readers will be able to apply this knowledge to their work and to create models that more accurately simulate the interactions between wave and ground, allowing them to better understand these phenomena and devise more appropriate strategies for defense and so on when necessary. This collection provides information that can be used by young researchers and post-graduate students in the boundary fields of hydraulics and geotechnical engineering who aim at becoming civil engineers, and it will be of particular value to practicing engineers of all experience levels who must regularly analyze complex interactions between fluids and ground.

Author : Kyriazis Pitilakis
Publisher : Springer
Page : 691 pages
File Size : 48,8 Mb
Release : 2018-04-24
Category : Science
ISBN : 9783319757414

Get Book

Recent Advances in Earthquake Engineering in Europe by Kyriazis Pitilakis Pdf

This book is a collection of invited lectures including the 5th Nicholas Ambraseys distinguished lecture, four keynote lectures and twenty-two thematic lectures presented at the 16th European Conference on Earthquake Engineering, held in Thessaloniki, Greece, in June 2018. The lectures are put into chapters written by the most prominent internationally recognized academics, scientists, engineers and researchers in Europe. They address a comprehensive collection of state-of-the-art and cutting-edge topics in earthquake engineering, engineering seismology and seismic risk assessment and management. The book is of interest to civil engineers, engineering seismologists, seismic risk managers, policymakers and consulting companies covering a wide spectrum of fields from geotechnical and structural earthquake engineering, to engineering seismology and seismic risk assessment and management. Scientists, professional engineers, researchers, civil protection policymakers and students interested in the seismic design of civil engineering structures and infrastructures, hazard and risk assessment, seismic mitigation policies and strategies, will find in this book not only the most recent advances in the state-of-the-art, but also new ideas on future earthquake engineering and resilient design of structures. Chapter 1 of this book is available open access under a CC BY 4.0 license.