Charge Based Cmos Digital Rf Transmitters

Author : Pedro Emiliano Paro Filho,Jan Craninckx,Piet Wambacq,Mark Ingels
Publisher : Springer
Page : 152 pages
File Size : 46,8 Mb
Release : 2016-09-27
Category : Technology & Engineering
ISBN : 9783319457871

Get Book

Charge-based CMOS Digital RF Transmitters by Pedro Emiliano Paro Filho,Jan Craninckx,Piet Wambacq,Mark Ingels Pdf

This book introduces a completely novel architecture that can relax the trade-off existing today between noise, power and area consumption in a very suitable solution for advanced wireless communication systems. Through the combination of charge-domain operation with incremental signaling, this architecture gives the best of both worlds, providing the reduced area and high portability of digital-intensive architectures with an improved out-of-band noise performance given by intrinsic noise filtering capabilities. Readers will be enabled to design higher performance radio front-ends that consume less power and area, especially with respect to the transmitter and power amplifier designs, considered by many the “battery killers” on most mobile devices.

Author : Pedro Emiliano Paro Filho,Jan Craninckx,Piet Wambacq,Mark Ingels
Publisher : Unknown
Page : 152 pages
File Size : 45,7 Mb
Release : 2017
Category : Electronics
ISBN : 3319457888

Get Book

Charge-based CMOS Digital RF Transmitters by Pedro Emiliano Paro Filho,Jan Craninckx,Piet Wambacq,Mark Ingels Pdf

Author : C.J. de Ranter,Michiel Steyaert
Publisher : Springer Science & Business Media
Page : 227 pages
File Size : 48,7 Mb
Release : 2006-04-18
Category : Technology & Engineering
ISBN : 9780306487132

Get Book

High Data Rate Transmitter Circuits by C.J. de Ranter,Michiel Steyaert Pdf

This practical guide and introduction to the design of key RF building blocks used in high data rate transmitters emphasizes CMOS circuit techniques applicable to oscillators and upconvertors. The book is written in an easily accessible manner, without losing detail on the technical side.

Author : Gernot Hueber,Robert Bogdan Staszewski
Publisher : John Wiley & Sons
Page : 608 pages
File Size : 50,5 Mb
Release : 2011-02-22
Category : Technology & Engineering
ISBN : 9780470277119

Get Book

Multi-Mode / Multi-Band RF Transceivers for Wireless Communications by Gernot Hueber,Robert Bogdan Staszewski Pdf

Summarizes cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Includes original contributions from distinguished researchers and professionals. Covers cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Contributors are all leading researchers and professionals in this field.

Author : Rui Paulo da Silva Martins,Pui-In Mak
Publisher : Springer Nature
Page : 316 pages
File Size : 53,7 Mb
Release : 2023-01-05
Category : Technology & Engineering
ISBN : 9783031222313

Get Book

Analog and Mixed-Signal Circuits in Nanoscale CMOS by Rui Paulo da Silva Martins,Pui-In Mak Pdf

This book provides readers with a single-source reference to the state-of-the-art in analog and mixed-signal circuit design in nanoscale CMOS. Renowned authors from academia describe creative circuit solutions and techniques, in state-of-the-art designs, enabling readers to deal with today’s technology demands for high integration levels with a strong miniaturization capability.

Author : Morteza S Alavi,Jaimin Mehta,Robert Bogdan Staszewski
Publisher : Academic Press
Page : 302 pages
File Size : 53,7 Mb
Release : 2016-11-18
Category : Technology & Engineering
ISBN : 9780128025031

Get Book

Radio-Frequency Digital-to-Analog Converters by Morteza S Alavi,Jaimin Mehta,Robert Bogdan Staszewski Pdf

With the proliferation of wireless networks, there is a need for more compact, low-cost, power efficient transmitters that are capable of supporting the various communication standards, including Bluetooth, WLAN, GSM/EDGE, WCDMA and 4G of 3GPP cellular. This book describes a novel idea of RF digital-to-analog converters (RFDAC) and demonstrates how they can realize all-digital, fully-integrated RF transmitters that support all the current multi-mode and multi-band communication standards. With this book the reader will: Understand the challenges of realizing a universal CMOS RF transmitter Recognize the design issues and the advantages and disadvantages related to analog and digital transmitter architectures Master designing an RF transmitter from system level modeling techniques down to circuit designs and their related layout know-hows Grasp digital polar and I/Q calibration techniques as well as the digital predistortion approaches Learn how to generate appropriate digital I/Q baseband signals in order to apply them to the test chip and measure the RF-DAC performance. Highlights the benefits and implementation challenges of software-defined transmitters using CMOS technology Includes various types of analog and digital RF transmitter architectures for wireless applications Presents an all-digital polar RFDAC transmitter architecture and describes in detail its implementation Presents a new all-digital I/Q RFDAC transmitter architecture and its implementation Provides comprehensive design techniques from system level to circuit level Introduces several digital predistortion techniques which can be used in RF transmitters Describes the entire flow of system modeling, circuit simulation, layout techniques and the measurement process

Author : Robert Bogdan Staszewski,Poras T. Balsara
Publisher : John Wiley & Sons
Page : 281 pages
File Size : 48,9 Mb
Release : 2006-09-22
Category : Technology & Engineering
ISBN : 9780470041949

Get Book

All-Digital Frequency Synthesizer in Deep-Submicron CMOS by Robert Bogdan Staszewski,Poras T. Balsara Pdf

A new and innovative paradigm for RF frequency synthesis and wireless transmitter design Learn the techniques for designing and implementing an all-digital RF frequency synthesizer. In contrast to traditional RF techniques, this innovative book sets forth digitally intensive design techniques that lead the way to the development of low-cost, low-power, and highly integrated circuits for RF functions in deep submicron CMOS processes. Furthermore, the authors demonstrate how the architecture enables readers to integrate an RF front-end with the digital back-end onto a single silicon die using standard ASIC design flow. Taking a bottom-up approach that progressively builds skills and knowledge, the book begins with an introduction to basic concepts of frequency synthesis and then guides the reader through an all-digital RF frequency synthesizer design: Chapter 2 presents a digitally controlled oscillator (DCO), which is the foundation of a novel architecture, and introduces a time-domain model used for analysis and VHDL simulation Chapter 3 adds a hierarchical layer of arithmetic abstraction to the DCO that makes it easier to operate algorithmically Chapter 4 builds a phase correction mechanism around the DCO such that the system's frequency drift or wander performance matches that of the stable external frequency reference Chapter 5 presents an application of the all-digital RF synthesizer Chapter 6 describes the behavioral modeling and simulation methodology used in design The final chapter presents the implementation of a full transmitter and experimental results. The novel ideas presented here have been implemented and proven in two high-volume, commercial single-chip radios developed at Texas Instruments: Bluetooth and GSM. While the focus of the book is on RF frequency synthesizer design, the techniques can be applied to the design of other digitally assisted analog circuits as well. This book is a must-read for students and engineers who want to learn a new paradigm for RF frequency synthesis and wireless transmitter design using digitally intensive design techniques.

Author : Andrei Grebennikov
Publisher : John Wiley & Sons
Page : 848 pages
File Size : 40,5 Mb
Release : 2011-07-12
Category : Technology & Engineering
ISBN : 9780470520994

Get Book

RF and Microwave Transmitter Design by Andrei Grebennikov Pdf

RF and Microwave Transmitter Design is unique in its coverage of both historical transmitter design and cutting edge technologies. This text explores the results of well-known and new theoretical analyses, while informing readers of modern radio transmitters' pracitcal designs and their components. Jam-packed with information, this book broadcasts and streamlines the author's considerable experience in RF and microwave design and development.

Author : Kenichi Okada,Shouhei Kousai
Publisher : Springer Science & Business Media
Page : 224 pages
File Size : 41,5 Mb
Release : 2011-08-26
Category : Technology & Engineering
ISBN : 9781441985149

Get Book

Digitally-Assisted Analog and RF CMOS Circuit Design for Software-Defined Radio by Kenichi Okada,Shouhei Kousai Pdf

This book describes the state-of-the-art in RF, analog, and mixed-signal circuit design for Software Defined Radio (SDR). It synthesizes for analog/RF circuit designers the most important general design approaches to take advantage of the most recent CMOS technology, which can integrate millions of transistors, as well as several real examples from the most recent research results.

Author : Sangeeta Singh,Rajeev Arya,M. P. Singh,Brijesh Iyer
Publisher : Springer Nature
Page : 163 pages
File Size : 55,7 Mb
Release : 2021-02-07
Category : Technology & Engineering
ISBN : 9789811598654

Get Book

CMOS Analog IC Design for 5G and Beyond by Sangeeta Singh,Rajeev Arya,M. P. Singh,Brijesh Iyer Pdf

This book is focused on addressing the designs of FinFET-based analog ICs for 5G and E-band communication networks. In addition, it also incorporates some of the contemporary developments over different fields. It highlights the latest advances, problems and challenges and presents the latest research results in the field of mm-wave integrated circuits designing based on scientific literature and its practical realization. The traditional approaches are excluded in this book. The authors cover various design guidelines to be taken care for while designing these circuits and detrimental scaling effects on the same. Moreover, Gallium Nitrides (GaN) are also reported to show huge potentials for the power amplifier designing required in 5G communication network. Subsequently, to enhance the readability of this book, the authors also include real-time problems in RFIC designing, case studies from experimental results, and clearly demarking design guidelines for the 5G communication ICs designing. This book incorporates the most recent FinFET architecture for the analog IC designing and the scaling effects along with the GaN technology as well.

Author : Yikun Yu,Peter G.M. Baltus,Arthur H.M. van Roermund
Publisher : Springer Science & Business Media
Page : 123 pages
File Size : 41,7 Mb
Release : 2011-01-06
Category : Technology & Engineering
ISBN : 9789400706620

Get Book

Integrated 60GHz RF Beamforming in CMOS by Yikun Yu,Peter G.M. Baltus,Arthur H.M. van Roermund Pdf

Integrated 60GHz RF Beamforming in CMOS describes new concepts and design techniques that can be used for 60GHz phased array systems. First, general trends and challenges in low-cost high data-rate 60GHz wireless system are studied, and the phased array technique is introduced to improve the system performance. Second, the system requirements of phase shifters are analyzed, and different phased array architectures are compared. Third, the design and implementation of 60GHz passive and active phase shifters in a CMOS technology are presented. Fourth, the integration of 60GHz phase shifters with other key building blocks such as low noise amplifiers and power amplifiers are described in detail. Finally, this book describes the integration of a 60GHz CMOS amplifier and an antenna in a printed circuit-board (PCB) package.

Author : Krzysztof Iniewski
Publisher : CRC Press
Page : 762 pages
File Size : 53,6 Mb
Release : 2017-12-19
Category : Medical
ISBN : 9781351833561

Get Book

Integrated Microsystems by Krzysztof Iniewski Pdf

As rapid technological developments occur in electronics, photonics, mechanics, chemistry, and biology, the demand for portable, lightweight integrated microsystems is relentless. These devices are getting exponentially smaller, increasingly used in everything from video games, hearing aids, and pacemakers to more intricate biomedical engineering and military applications. Edited by Kris Iniewski, a revolutionary in the field of advanced semiconductor materials, Integrated Microsystems: Electronics, Photonics, and Biotechnology focuses on techniques for optimized design and fabrication of these intelligent miniaturized devices and systems. Composed of contributions from experts in academia and industry around the world, this reference covers processes compatible with CMOS integrated circuits, which combine computation, communications, sensing, and actuation capabilities. Light on math and physics, with a greater emphasis on microsystem design and configuration and electrical engineering, this book is organized in three sections—Microelectronics and Biosystems, Photonics and Imaging, and Biotechnology and MEMs. It addresses key topics, including physical and chemical sensing, imaging, smart actuation, and data fusion and management. Using tables, figures, and equations to help illustrate concepts, contributors examine and explain the potential of emerging applications for areas including biology, nanotechnology, micro-electromechanical systems (MEMS), microfluidics, and photonics.

Author : M Jamal Deen,Tor A Fjeldly
Publisher : World Scientific
Page : 424 pages
File Size : 46,5 Mb
Release : 2002-04-10
Category : Technology & Engineering
ISBN : 9789814488921

Get Book

Cmos Rf Modeling, Characterization And Applications by M Jamal Deen,Tor A Fjeldly Pdf

CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 µm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.

Author : Cam Nguyen,Meng Miao
Publisher : Springer
Page : 113 pages
File Size : 49,7 Mb
Release : 2017-03-21
Category : Technology & Engineering
ISBN : 9783319531076

Get Book

Design of CMOS RFIC Ultra-Wideband Impulse Transmitters and Receivers by Cam Nguyen,Meng Miao Pdf

This book presents the design of ultra-wideband (UWB) impulse-based transmitter and receiver frontends, operating within the 3.1-10.6 GHz frequency band, using CMOS radio-frequency integrated-circuits (RFICs). CMOS RFICs are small, cheap, low power devices, better suited for direct integration with digital ICs as compared to those using III-V compound semiconductor devices. CMOS RFICs are thus very attractive for RF systems and, in fact, the principal choice for commercial wireless markets. The book comprises seven chapters. The first chapter gives an introduction to UWB technology and outlines its suitability for high resolution sensing and high-rate, short-range ad-hoc networking and communications. The second chapter provides the basics of CMOS RFICs needed for the design of the UWB RFIC transmitter and receiver presented in this book. It includes the design fundamentals, lumped and distributed elements for RFIC, layout, post-layout simulation, and measurement. The third chapter discusses the basics of UWB systems including UWB advantages and applications, signals, basic modulations, transmitter and receiver frontends, and antennas. The fourth chapter addresses the design of UWB transmitters including an overview of basic components, design of pulse generator, BPSK modulator design, and design of a UWB tunable transmitter. Chapter 5 presents the design of UWB receivers including the design of UWB low-noise amplifiers, correlators, and a UWB 1 receiver. Chapter 6 covers the design of a UWB uniplanar antenna. Finally, a summary and conclusion is given in Chapter 7.

Author : Saad Asif
Publisher : CRC Press
Page : 336 pages
File Size : 52,8 Mb
Release : 2018-07-20
Category : Computers
ISBN : 9780429881350

Get Book

5G Mobile Communications by Saad Asif Pdf

This book will help readers comprehend technical and policy elements of telecommunication particularly in the context of 5G. It first presents an overview of the current research and standardization practices and lays down the global frequency spectrum allocation process. It further lists solutions to accommodate 5G spectrum requirements. The readers will find a considerable amount of information on 4G (LTE-Advanced), LTE-Advance Pro, 5G NR (New Radio); transport network technologies, 5G NGC (Next Generation Core), OSS (Operations Support Systems), network deployment and end-to-end 5G network architecture. Some details on multiple network elements (end products) such as 5G base station/small cells and the role of semiconductors in telecommunication are also provided. Keeping trends in mind, service delivery mechanisms along with state-of-the-art services such as MFS (mobile financial services), mHealth (mobile health) and IoT (Internet-of-Things) are covered at length. At the end, telecom sector’s burning challenges and best practices are explained which may be looked into for today’s and tomorrow’s networks. The book concludes with certain high level suggestions for the growth of telecommunication, particularly on the importance of basic research, departure from ten-year evolution cycle and having a 20–30 year plan. Explains the conceivable six phases of mobile telecommunication’s ecosystem that includes R&D, standardization, product/network/device & application development, and burning challenges and best practices Provides an overview of research and standardization on 5G Discusses solutions to address 5G spectrum requirements while describing the global frequency spectrum allocation process Presents various case studies and policies Provides details on multiple network elements and the role of semiconductors in telecommunication Presents service delivery mechanisms with special focus on IoT