Engineering Solutions For Manufacturing Processes

Author : Zheng Yi Jiang,Xiang Hua Liu,Si Hai Jiao,Jing Tao Han
Publisher : Trans Tech Publications Ltd
Page : 2558 pages
File Size : 46,7 Mb
Release : 2013-01-25
Category : Technology & Engineering
ISBN : 9783038260295

Get Book

Engineering Solutions for Manufacturing Processes by Zheng Yi Jiang,Xiang Hua Liu,Si Hai Jiao,Jing Tao Han Pdf

Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers of this 3 volumes set on “Engineering Solutions for Manufacturing Processes” are grouped as follows: Chapter 1: Parts of Machines and Mechanisms. Design, Analysis and Simulation; Chapter 2: Sensors, Measurement and Detection; Chapter 3: Data Acquisition and Data Processing, Computational Techniques; Chapter 4: Mechatronics and Robotics; Chapter 5: Advanced NC Techniques and Equipment; Chapter 6: Control and Automation; Chapter 7: Electronics/Microelectronics Technology; Chapter 8: Advanced Decisions for Automatic Manufacturing; Chapter 9: Information Processing Technologies; Chapter 10: Technologies in Architecture and Construction; Chapter 11: Technologies and Equipment in Medicine; Chapter 12: Technologies in Food Industry and Agriculture; Chapter 13: Products Design; Chapter 14: Engineering Education; Chapter 15: Economics, Marketing and Engineering Management.

Author : Zheng Yi Jiang,Xiang Hua Liu
Publisher : Trans Tech Publications Ltd
Page : 936 pages
File Size : 54,6 Mb
Release : 2015-03-16
Category : Technology & Engineering
ISBN : 9783038268079

Get Book

Engineering Solutions for Manufacturing Processes V by Zheng Yi Jiang,Xiang Hua Liu Pdf

Collection of selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing, (ICAMMP 2014), December 20-21, 2014, Fuzhou, China. The 168 papers are grouped as follows: Chapter 1: Designing and Dynamic Analysis of Machines and Mechanical Structures; Chapter 2: Mechanical Strength and Reliability; Chapter 3: Practice of Computer-Aided Designing and Modeling; Chapter 4: Measurements, Testing and Diagnosis, Processing of Image and Data; Chapter 5: Vibration and Noise in Engineering; Chapter 6: Thermal Conductivity and Thermal Analysis; Chapter 7: Engineering Machinery and Equipment; Chapter 8: Mechatronics, Industrial Robotics, Automation and Control Technology; Chapter 9: Advanced Numerical Control (NC) Technologies and Equipments; Chapter 10: Organization of the Production, Product Design, Production Planning and Scheduling

Author : Zheng Yi Jiang,Xiang Hua Liu,Jing Tao Han
Publisher : Trans Tech Publications Ltd
Page : 1818 pages
File Size : 54,6 Mb
Release : 2014-02-06
Category : Technology & Engineering
ISBN : 9783038263968

Get Book

Engineering Solutions for Manufacturing Processes IV by Zheng Yi Jiang,Xiang Hua Liu,Jing Tao Han Pdf

Collection of selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China. The 342 papers are grouped as follows: Chapter 1: Computer-Aided Design and Research in Mechanical Engineering, Chapter 2: Research and Design Solutions in Machinery Industry, Chapter 3: Mathematical Modeling and Optimization in Engineering Sciences, Chapter 4: Technology of Measurement and Signal Processing, Chapter 5: Sensor Technology, Chapter 6: Microelectronics, Circuit Technology and Embedded Systems, Chapter 7: Mechatronics and Control, Chapter 8: Technologies of Machine Vision and Identification, Chapter 9: Industrial Robotics and Automated Manufacturing, Chapter 10: Applied Information Technologies, Chapter 11: Construction Technologies, Structural Strength and Reliability, Chapter 12: Product Design, Chapter 13: Operations and Production Management, Chapter 14: Environmental Engineering, Chapter 15: Multidisciplinary Engineering Education

Author : John Garside
Publisher : Elsevier
Page : 273 pages
File Size : 40,6 Mb
Release : 1999-08-17
Category : Technology & Engineering
ISBN : 9780080510675

Get Book

Make It! The Engineering Manufacturing Solution by John Garside Pdf

Manufacturing operations are the real wealth creators within a business, accounting for the majority of management and financial assets needed to sustain the company. Make it! encapsulates the author's many years of experience gained designing manufacturing systems and supply-chains in factories across the world. It provides a proven, logical sequence of events needed to design effective modular factories capable of competing with the world's best. In their 1999 'Best-Managed' Companies Awards, 'Aviation Week and Space Technology' (Vol. 150, No. 22) quoted the author's former company, Lucas Aerospace, as achieving 'Most improved major aerospace company 1994 - 1998' status, ranking it second in Competitiveness, assessed by an amalgamation of asset utilisation, productivity and financial stability. This book has been written for managers charged with the responsibility for improving business profitability and for engineers facing the challenge of introducing more cost effective manufacturing processes. Many manufacturing businesses have failed to invest adequate resources in designing factory operations, mainly due to the lack of expertise and detailed knowledge needed to undertake this demanding task. John Garside is a Principal Fellow at Warwick International Manufacturing Group, The University of Warwick. This follows an extensive industrial career in highly competitive first tier system and component manufacturing businesses, who supplied many of the world's leading aerospace, automotive and industrial equipment makers. Written in a concise style giving ready access to information Provides detailed checklists allowing managers to make informed judgements concerning the critical resources needed to meet and exceed customer expectations Informs you how to 'Make it!' imparting practical knowledge on how to create world class factories

Author : Serope Kalpakjian
Publisher : Pearson Education India
Page : 1036 pages
File Size : 47,7 Mb
Release : 1984
Category : Manufacturing processes
ISBN : 8131705668

Get Book

Manufacturing Processes for Engineering Materials by Serope Kalpakjian Pdf

Author : Da Yun Xu
Publisher : Trans Tech Publications Ltd
Page : 490 pages
File Size : 46,7 Mb
Release : 2014-02-27
Category : Technology & Engineering
ISBN : 9783038264163

Get Book

Engineering Solutions for Intensification of Production by Da Yun Xu Pdf

Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2014), April 27-28, 2014, Hong Kong, China. The 78 papers are grouped as follows: Chapter 1: Materials Science, Technology of Materials Processing and Chemical Engineering, Chapter 2: Researches and Design of Machinery and Equipment for Industry, Chapter 3: Mechatronics, Robotics and Technology of Control in Manufacture, Chapter 4: Information Technologies and Data Processing in Engineering Practice, Chapter 5: Engineering Management and Organization of Production

Author : Philip D. Rufe
Publisher : Society of Manufacturing Engineers (SME)
Page : 114 pages
File Size : 41,9 Mb
Release : 2014-11-02
Category : Science
ISBN : 9780872638778

Get Book

Fundamentals of Manufacturing Workbook, Second Edition by Philip D. Rufe Pdf

Used in combination with the book, Fundamentals of Manufacturing, Third Edition, this workbook provides structured practice questions for individuals preparing to take the Certified Manufacturing Technologist (CMfgT) and Certified Manufacturing Engineer (CMfgE) certification exams. The curricula is consistent with the latest manufacturing Body of Knowledge for these certifications. Authored and reviewed by subject matter experts, the Fundamentals of Manufacturing Workbook is an essential tool for studying for the exams and determining where further work is needed. It contains 325 questions and solutions weighted according to the Body of Knowledge. Areas covered include: Mathematic FundamentalsApplied Engineering ScienceMaterialsProduct DesignManufacturing ProcessesProduction SystemsAutomated Systems and ControlQualityManufacturing ManagementPersonal Effectiveness

Author : Robert Creese
Publisher : CRC Press
Page : 416 pages
File Size : 50,7 Mb
Release : 2017-12-19
Category : Technology & Engineering
ISBN : 9781351990707

Get Book

Introduction to Manufacturing Processes and Materials by Robert Creese Pdf

The first manufacturing book to examine time-based break-even analysis, this landmark reference/text applies cost analysis to a variety of industrial processes, employing a new, problem-based approach to manufacturing procedures, materials, and management. An Introduction to Manufacturing Processes and Materials integrates analysis of material costs and process costs, yielding a realistic, effective approach to planning and executing efficient manufacturing schemes. It discusses tool engineering, particularly in terms of cost for press work, forming dies, and casting patterns, process parameters such as gating and riser design for casting, feeds, and more.

Author : John A. Schey
Publisher : McGraw-Hill Science, Engineering & Mathematics
Page : 992 pages
File Size : 44,7 Mb
Release : 2000
Category : History
ISBN : UOM:39015050774267

Get Book

Introduction to Manufacturing Processes by John A. Schey Pdf

This revision aims to address changes that have taken effect since the publication of the second edition. The most significant change has been in the attitude of industry to concurrent engineering. In 1987, mostly lip service was paid to it; today, it has become general practice in most competitive corporations. In the second edition , the author discussed this as the manufacturing system. In the third edition it becomes the focal point. Concurrent engineering involves the whole product realization process, including product concept, performance criteria, mechanical design and analysis, materials selection, process planning and modeling, production control, automation, assembly, management, and others. An introductory text cannot possibly cover all of these topics, hence the emphasis of the third edition remains on the physical principles and the application of these principles to processes. The major difference relative to the second edition will be the emphasis on interactions between process and design. Capabilities and limitations of processes will be highlighted to show what they mean in terms of design possibilities, and design modifications will be suggested for ease of manufacture. Impact on the environment and possibilities for recycling will be woven into the entire text.

Author : Stefan Trzcielinski,Beata Mrugalska,Waldemar Karwowski,Emilio Rossi,Massimo Di Nicolantonio
Publisher : Springer Nature
Page : 490 pages
File Size : 43,6 Mb
Release : 2021-07-03
Category : Technology & Engineering
ISBN : 9783030804626

Get Book

Advances in Manufacturing, Production Management and Process Control by Stefan Trzcielinski,Beata Mrugalska,Waldemar Karwowski,Emilio Rossi,Massimo Di Nicolantonio Pdf

This book provides readers with a timely snapshot of human factors research and methods fostering a better integration of technologies and humans during the whole manufacturing cycle, giving a special emphasis to the quality and safety of the industrial environment for workers, the efficiency of the manufacturing processes itself, the quality of the final product, and its distribution to and use by the customers. It discusses timely issues relating to the automation of the manufacturing processes, and the challenges imposed by the implementation of industry 4.0, additive manufacturing and 3D printing technologies. Contributions cover a range of industrial sectors, such as the automotive, health and constructions ones, highlighting both organizational and engineering solutions fostering sustainability, globalization, customization, workers’ well-being and consumers’ satisfaction, among other issues. Based on the AHFE 2021 Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, held virtually on 25–29 July, 2021, from USA, this book, which merges ergonomic research and technical know-how in the field of manufacturing and product design, addresses a wide range of engineers, designers and professionals, dealing with the integration of technologies and humans in the factories of the future.

Author : Serope Kalpakjian,Steven R. Schmid
Publisher : Unknown
Page : 980 pages
File Size : 40,7 Mb
Release : 2003
Category : Science
ISBN : STANFORD:36105111981119

Get Book

Manufacturing Processes for Engineering Materials by Serope Kalpakjian,Steven R. Schmid Pdf

"This new edition of Manufacturing Processes for Engineering Materials continues its tradition of balanced and comprehensive coverage of relevant engineering fundamentals, mathematical analysis, and traditional as well as advanced applications of manufacturing processes and operations. Updated and thoroughly edited for improved readability and clarity, this book is written mainly for students in mechanical, industrial, and metallurgical and materials engineering programs. The text continually emphasizes the important interactions among a wide variety of technical disciplines and the economics of manufacturing operations in an increasingly competitive global marketplace."--BOOK JACKET.

Author : J. P. KAUSHISH
Publisher : PHI Learning Pvt. Ltd.
Page : 1034 pages
File Size : 46,6 Mb
Release : 2010-06-12
Category : Technology & Engineering
ISBN : 9788120340824

Get Book

MANUFACTURING PROCESSES by J. P. KAUSHISH Pdf

The revised and updated second edition of this book gives an in-depth presentation of the basic principles and operational procedures of general manufacturing processes. It aims at assisting the students in developing an understanding of the important and often complex interrelationship among various technical and economical factors involved in manufacturing. The book begins with a discussion on material properties while laying emphasis on the influence of materials and processing parameters in understanding manufacturing processes and operations. This is followed by a detailed description of various manufacturing processes commonly used in the industry. With several revisions and the addition of four new chapters, the new edition also includes a detailed discussion on mechanics of metal cutting, features and working of machine tools, design of molds and gating systems for proper filling and cooling of castings. Besides, the new edition provides the basics of solid-state welding processes, weldability, heat in welding, residual stresses and testing of weldments and also of non-conventional machining methods, automation and transfer machining, machining centres, robotics, manufacturing of gears, threads and jigs and fixtures. The book is intended for undergraduate students of mechanical engineering, production engineering and industrial engineering. The diploma students and those preparing for AMIE, Indian Engineering Services and other competitive examinations will also find the book highly useful. New to This Edition : Includes four new chapters Non-conventional Machining Methods; Automation: Transfer Machining, Machining Centres and Robotics; Manufacturing Gears and Threads; and Jigs and Fixtures to meet the course requirements. Offers a good number of worked-out examples to help the students in mastering the concepts of the various manufacturing processes. Provides objective-type questions drawn from various competitive examinations such as Indian Engineering Services and GATE.

Author : Jiri Tlusty
Publisher : Pearson
Page : 0 pages
File Size : 42,6 Mb
Release : 2000
Category : Machine-tools
ISBN : 0201498650

Get Book

Manufacturing Processes and Equipment by Jiri Tlusty Pdf

Manufacturing Processes and Equipment by George Tlusty describes and explains existing production processes and machinery. More importantly, it uses the powerful analytical tools of machine science (heat transfer, vibrations, control theory) and applies them to the solution of manufacturing problems. There is more emphasis on the analytical development and application of engineering theory to manufacturing problems and students are encouraged to generate their own computer solutions to gain understanding. Unique features Integrates analytical tools from other machine science subjects (e.g., heat transfer, vibrations, control theory) and applies them to manufacturing processes Includes chapters on machine tools and other production equipment, discussing the aspects of performance and design drives, structures, and controls Emphasizes understanding of production machinery, its improvement and automation, so students are able to specify, select, install, and use new equipment Presents analytical development and necessary derivations in some detail and encourages students to develop their own computer programs to solve problems

Author : J.A. Schey
Publisher : Unknown
Page : 128 pages
File Size : 44,6 Mb
Release : 1977
Category : Electronic
ISBN : OCLC:841028921

Get Book

Solutions Manual to Accompany Introduction to Manufacturing Processes by J.A. Schey Pdf

Author : John Barry DuVall,David R. Hillis
Publisher : Goodheart-Wilcox Publisher
Page : 0 pages
File Size : 55,5 Mb
Release : 2011-09-15
Category : Education
ISBN : 1605255696

Get Book

Manufacturing Processes by John Barry DuVall,David R. Hillis Pdf

Donated by Machine Technology / Diesel Mechanics instructor John Clark as supplementary material. 08/27/2019.