Inelastic Behavior Of Materials And Structures Under Monotonic And Cyclic Loading

Author : Holm Altenbach,Michael Brünig
Publisher : Springer
Page : 261 pages
File Size : 55,6 Mb
Release : 2015-02-03
Category : Science
ISBN : 9783319146607

Get Book

Inelastic Behavior of Materials and Structures Under Monotonic and Cyclic Loading by Holm Altenbach,Michael Brünig Pdf

This book presents studies on the inelastic behavior of materials and structures under monotonic and cyclic loads. It focuses on the description of new effects like purely thermal cycles or cases of non-trivial damages. The various models are based on different approaches and methods and scaling aspects are taken into account. In addition to purely phenomenological models, the book also presents mechanisms-based approaches. It includes contributions written by leading authors from a host of different countries.

Author : Konstantin Naumenko,Marcus Aßmus
Publisher : Springer
Page : 558 pages
File Size : 49,6 Mb
Release : 2016-05-12
Category : Science
ISBN : 9789811009594

Get Book

Advanced Methods of Continuum Mechanics for Materials and Structures by Konstantin Naumenko,Marcus Aßmus Pdf

This volume presents a collection of contributions on advanced approaches of continuum mechanics, which were written to celebrate the 60th birthday of Prof. Holm Altenbach. The contributions are on topics related to the theoretical foundations for the analysis of rods, shells and three-dimensional solids, formulation of constitutive models for advanced materials, as well as development of new approaches to the modeling of damage and fractures.

Author : Yuhshi Fukumoto,George C. Lee
Publisher : CRC Press
Page : 386 pages
File Size : 41,9 Mb
Release : 1991-12-07
Category : Technology & Engineering
ISBN : 0849301440

Get Book

Stability and Ductility of Steel Structures under Cyclic Loading by Yuhshi Fukumoto,George C. Lee Pdf

The U.S.-Japan Joint Seminar on Stability and Ductility of Steel Structures under Cyclic Loading was held in Osaka, Japan on July 1-3, 1991. This three-day seminar was devoted to five main topics: 1) materials properties and plasticity models, which featured experimental investigations of the material properties of structural steels and plasticity models of the material characteristics under dynamic and cyclic loading conditions; 2) experimental observations, which featured experimental studies of cyclic buckling behavior of steel structural members and frames subjected to dynamic and cyclic loading conditions; 3) analytical modeling, which discussed analytical modeling of the cyclic buckling behavior of steel structural members and frames; 4) design implementation, which emphasized earthquake engineering design of steel structures against cyclic buckling; and 5) future research needs, in which future analytical and experimental research needs on the behavior and design of steel structures subjected to dynamic and cyclic loading conditions were identified. This book contains 30 contributed papers presented at the seminar.

Author : Holm Altenbach,Michael Beitelschmidt,Markus Kästner,Konstantin Naumenko,Thomas Wallmersperger
Publisher : Springer Nature
Page : 336 pages
File Size : 41,6 Mb
Release : 2022-05-03
Category : Science
ISBN : 9783030976750

Get Book

Material Modeling and Structural Mechanics by Holm Altenbach,Michael Beitelschmidt,Markus Kästner,Konstantin Naumenko,Thomas Wallmersperger Pdf

This book presents various questions of continuum mechanical modeling in the context of experimental and numerical methods, in particular, multi-field problems that go beyond the standard models of continuum mechanics. In addition, it discusses dynamic problems and practical solutions in the field of numerical methods. It focuses on continuum mechanics, which is often overlooked in the traditional division of mechanics into statics, strength of materials and kinetics. The book is dedicated to Prof. Volker Ulbricht, who passed away on April 9, 2021.

Author : Konstantin Naumenko,Holm Altenbach
Publisher : Springer
Page : 371 pages
File Size : 40,9 Mb
Release : 2016-05-11
Category : Science
ISBN : 9783319316291

Get Book

Modeling High Temperature Materials Behavior for Structural Analysis by Konstantin Naumenko,Holm Altenbach Pdf

This monograph presents approaches to characterize inelastic behavior of materials and structures at high temperature. Starting from experimental observations, it discusses basic features of inelastic phenomena including creep, plasticity, relaxation, low cycle and thermal fatigue. The authors formulate constitutive equations to describe the inelastic response for the given states of stress and microstructure. They introduce evolution equations to capture hardening, recovery, softening, ageing and damage processes. Principles of continuum mechanics and thermodynamics are presented to provide a framework for the modeling materials behavior with the aim of structural analysis of high-temperature engineering components.

Author : Holm Altenbach,Konstantin Naumenko
Publisher : Springer Nature
Page : 355 pages
File Size : 50,7 Mb
Release : 2023-08-04
Category : Science
ISBN : 9783031390708

Get Book

Creep in Structures VI by Holm Altenbach,Konstantin Naumenko Pdf

This book offers a current state of the art in analysis and modeling of creep phenomena with applications to the structural mechanics. It presents the some presentations from the IUTAM-Symposium series "Creep in Structures", which held in Magdeburg (Germany) in September 2023, and it discusses many advances and new results in the field. These are for example: interlinks of mechanics with materials science in multi-scale analysis of deformation and damage mechanisms over a wide range of stresses and temperature; development and analysis of new alloys for (ultra)high-temperature applications; formulation and calibration of advanced constitutive models of inelastic behavior under transient loading and temperature conditions; development of efficient procedures and machine learning techniques for identification of material parameters in advanced constitutive laws; introduction of gradient-enhanced and non-local theories to account for damage and fracture processes; and application of new experimental methods, such as digital image correlation, for the analysis of inelastic deformation under multi-axial stress state.

Author : Zenon Mróz,Dieter Weichert,Stanislaw Dorosz
Publisher : Springer Science & Business Media
Page : 501 pages
File Size : 53,8 Mb
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 9789401102711

Get Book

Inelastic Behaviour of Structures under Variable Loads by Zenon Mróz,Dieter Weichert,Stanislaw Dorosz Pdf

This collection of papers is a state of the art presentation of theories and methods related to the problem of the behaviour of mechanical structures under variable loads beyond their elastic limit In particular, the problems of shakedown, ratchetting, transient and asymptotic cyclic states are addressed. The volume is composed of four chapters devoted to material modelling for cyclic loading conditions; general theory of accommodated states of structures; effects of changes of the geometry on the inelastic structural response; and numerical techniques with applications to particular engineering problems. It was aimed to provide a unified approach in order to understand both inelastic material and structural response under variable loading conditions. The attempt to extend the classical shakedown theory of Melan and Koiter to geometrically non-linear problems is presented in several papers. The industrial application of cyclic plasticity to the analysis and the design of pressure bellows, compensators, turbine disks, or flange connections under thermal and pressure cycles illustrates the great potential of the numerical techniques developed for this purpose using mostly min-max approaches. The treatment of railway problems and the analysis and optimisation of pavements are further examples of important areas of applications. Emphasis was laid on approaches that take into account the fact that loading histories are often not precisely known Therefore, the center of interest lies in other than step by step calculation methods.

Author : D. A. Indeitsev,A. M. Krivtsov
Publisher : Springer Nature
Page : 443 pages
File Size : 49,9 Mb
Release : 2023-08-02
Category : Technology & Engineering
ISBN : 9783031372469

Get Book

Advanced Problem in Mechanics III by D. A. Indeitsev,A. M. Krivtsov Pdf

This book focuses on original theories and approaches in the field of mechanics. It reports on both theoretical and applied researches, with a special emphasis on problems and solutions at the interfaces of mechanics and other research areas. The respective chapters highlight cutting-edge works fostering development in fields such as micro- and nanomechanics, material science, physics of solid states, molecular physics, astrophysics, and many others. Special attention has been given to outstanding research conducted by young scientists from all over the world. This book is based on the 49th edition of the international conference “Advanced Problems in Mechanics”, which was held on June 21-25, 2021, in St. Petersburg, Russia, and co-organized by The Peter the Great St. Petersburg Polytechnic University and the Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, under the patronage of the Russian Academy of Sciences. It provides researchers and graduate students with an extensive overview of the latest research and a source of inspiration for future developments and collaborations in mechanics and related fields.

Author : Holm Altenbach,Julius Kaplunov,Hongbing Lu,Masayuki Nakada
Publisher : Springer Nature
Page : 254 pages
File Size : 52,5 Mb
Release : 2023-03-09
Category : Technology & Engineering
ISBN : 9783031224010

Get Book

Advances in Mechanics of Time-Dependent Materials by Holm Altenbach,Julius Kaplunov,Hongbing Lu,Masayuki Nakada Pdf

This book presents current trends in Mechanics of Time Dependent Materials. It covers a number of cutting-edge themes, such as characterization of linear and nonlinear mechanical behavior of viscoelastic materials and their composites, taking into consideration large deformations, low, moderate and large strain rates, as well as failure and fracture phenomena. The contributions are inspired by advanced applications in modern technologies, such as injection molding and extrusion.

Author : Holm Altenbach,Artur Ganczarski
Publisher : Springer Nature
Page : 289 pages
File Size : 55,7 Mb
Release : 2022-08-31
Category : Technology & Engineering
ISBN : 9783031043543

Get Book

Advanced Theories for Deformation, Damage and Failure in Materials by Holm Altenbach,Artur Ganczarski Pdf

The book introduces advanced theories for deformation, damage, and failure in materials. The overall continuum mechanical framework was marked out and added by creep and damage mechanics of materials at elevated temperatures. The time-dependent and time-independent models of cyclic plasticity for low cycle and thermomechanical fatigue life assessment were specified in a very special manner: instead of three-dimensional statements, only one-dimensional rheological models were discussed. Anisotropic plasticity during non-proportional loading and anisotropy of yield/failure criteria is more and more important in modern applications. It is showing how the limit states of materials can be estimated. In addition, the damage and failure of composite materials demonstrate the possibility to extend continuum mechanics to continuum damage mechanics of composite materials.

Author : P. Benson Shing,Tada-aki Tanabe
Publisher : ASCE Publications
Page : 636 pages
File Size : 43,9 Mb
Release : 2001-01-01
Category : Technology & Engineering
ISBN : 0784474966

Get Book

Modeling of Inelastic Behavior of RC Structures Under Seismic Loads by P. Benson Shing,Tada-aki Tanabe Pdf

Proceedings of the U.S.?Japan Seminar on Post-Peak Behavior of Reinforced Concrete Structures Subjected to Seismic Loads: Recent Advances and Challenges on Analysis and Design, held in Tokyo and Lake Yamanaka, Japan, October 25-29, 1999. Sponsored by the National Science Foundation, U.S.A.; Japan Society for the Promotion of Science; Japan Concrete Institute. This collection presents the latest ideas and findings on the inelastic behavior of reinforced concrete (RC) structures from the analysis and design standpoints. These papers discuss state-of-the-art concrete material models and analysis methods that can be used to simulate and understand the inelastic behavior of RC structures, as well as design issues that can improve the seismic performance of these structures. Topics include modeling of concrete behavior; modeling of RC structures (finite element approach and macro-element approach); and experimental studies, analysis, and design issues.

Author : Alfred M. Freudenthal
Publisher : Unknown
Page : 587 pages
File Size : 41,5 Mb
Release : 1964
Category : Electronic
ISBN : OCLC:249412010

Get Book

The Inelastic Behavior of Engineering Materials and Structures by Alfred M. Freudenthal Pdf

Author : Holm Altenbach,Tetsuya Matsuda,Dai Okumura
Publisher : Springer
Page : 601 pages
File Size : 50,5 Mb
Release : 2015-06-03
Category : Science
ISBN : 9783319194400

Get Book

From Creep Damage Mechanics to Homogenization Methods by Holm Altenbach,Tetsuya Matsuda,Dai Okumura Pdf

This volume presents a collection of contributions on materials modeling, which were written to celebrate the 65th birthday of Prof. Nobutada Ohno. The book follows Prof. Ohno’s scientific topics, starting with creep damage problems and ending with homogenization methods.

Author : Dieter Weichert,Giulio Maier
Publisher : Springer
Page : 393 pages
File Size : 54,5 Mb
Release : 2014-05-04
Category : Technology & Engineering
ISBN : 9783709125588

Get Book

Inelastic Behaviour of Structures under Variable Repeated Loads by Dieter Weichert,Giulio Maier Pdf

This book deals with the safety assessment of structures and structural components, possibly operating beyond the elastic limits under variable repeated thermo-mechanical loads. Examples of such situations can be found both in mechanical and civil engineering (e.g. transportation technologies, pressure vessels, pipelines, offshore platforms, dams, pavements and buildings in seismic zones). So-called "direct” methods are focused, based on the shakedown theorems and their specialisation to limit theorems. These methods are receiving increased attention for the prediction of structural failure because they provide the information that is essential in practice (e.g. safety factor and collapse mechanisms) by more economical procedures than step-by-step inelastic analysis; also, they only need a minimum of information on the evolution of loads as functions of time. The addressed audience are primarily engineers and scientists active in Structural Engineering and Safety and Reliability Analysis.

Author : Holm Altenbach,Michael Brünig,Zbigniew L. Kowalewski
Publisher : Springer
Page : 213 pages
File Size : 52,7 Mb
Release : 2020-12-06
Category : Technology & Engineering
ISBN : 3030348539

Get Book

Plasticity, Damage and Fracture in Advanced Materials by Holm Altenbach,Michael Brünig,Zbigniew L. Kowalewski Pdf

This book presents studies on the plasticity, failure, and damage behavior of materials and structures under monotonic and cyclic loads. Featuring contributions by leading authors from around the globe, it focuses on the description of new effects observed in experiments, such as damage under cyclic loading. It also proposes various simulation models based on different approaches and compares them with tests, taking scaling aspects into account.