Liga And Its Applications

Author : Volker Saile,Ulrike Wallrabe,Osamu Tabata,Jan G. Korvink
Publisher : John Wiley & Sons
Page : 491 pages
File Size : 47,6 Mb
Release : 2009-01-07
Category : Technology & Engineering
ISBN : 9783527316984

Get Book

LIGA and its Applications by Volker Saile,Ulrike Wallrabe,Osamu Tabata,Jan G. Korvink Pdf

Covering technological aspects as well as the suitability and applicability of various kinds of uses, this handbook shows optimization strategies, techniques and assembly pathways to achieve the combination of complex, even three-dimensional structures with simple manufacturing steps. The authors provide information on markets, commercialization opportunities and aspects of mass or large-scale production as well as design tools, experimental techniques, novel materials, and ideas for future improvements. Not only do they weigh up cost versus quantity, they also consider CMOS and LIGA strategies. Of interest to physicists, electronics engineers, materials scientists, institutional and industrial libraries as well as graduate students of the relevant disciplines.

Author : Bharat Bhushan
Publisher : Springer Science & Business Media
Page : 666 pages
File Size : 44,9 Mb
Release : 2012-12-06
Category : Science
ISBN : 9789401156462

Get Book

Micro/Nanotribology and Its Applications by Bharat Bhushan Pdf

Micro/nanotribology as a field is concerned with experimental and theoretical investigations of processes ranging from atomic and molecular scales to the microscale, occurring during adhesion, friction, wear, and thin-film lubrication at sliding surfaces. As a field it is truly interdisciplinary, but this confronts the would-be entrant with the difficulty of becoming familiar with the basic theories and applications: the area is not covered in any undergraduate or graduate scientific curriculum. The present work commences with a history of tribology and micro/nanotribology, followed by discussions of instrumentation, basic theories of friction, wear and lubrication on nano- to microscales, and their industrial applications. A variety of research instruments are covered, including a variety of scanning probe microscopes and surface force apparatus. Experimental research and modelling are expertly dealt with, the emphasis throughout being applied aspects.

Author : Kaushik Kumar,Divya Zindani,Nisha Kumari,J. Paulo Davim
Publisher : Springer
Page : 150 pages
File Size : 41,7 Mb
Release : 2018-09-26
Category : Technology & Engineering
ISBN : 9783319999005

Get Book

Micro and Nano Machining of Engineering Materials by Kaushik Kumar,Divya Zindani,Nisha Kumari,J. Paulo Davim Pdf

This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.

Author : Patrik Schmuki,Sannakaisa Virtanen
Publisher : Springer Science & Business Media
Page : 477 pages
File Size : 51,9 Mb
Release : 2009-07-21
Category : Science
ISBN : 9780387735825

Get Book

Electrochemistry at the Nanoscale by Patrik Schmuki,Sannakaisa Virtanen Pdf

For centuries, electrochemistry has played a key role in technologically important areas such as electroplating or corrosion. In recent decades, electrochemical methods are receiving increasing attention in important strongly growing fields of science and technology such as nanosciences (nanoelectrochemistry) and life-sciences (organic and biological electrochemistry). Characterization, modification and understanding of various electrochemical interfaces or electrochemical processes at the nanoscale, has led to a huge increase of the scientific interest in electrochemical mechanisms as well as of application of electrochemical methods in novel technologies. This book presents exciting emerging scientific and technological aspects of the introduction of the nanodimension in electrochemical approaches are presented in 12 chapters/subchapters.

Author : Hans H. Gatzen,Volker Saile,Jürg Leuthold
Publisher : Springer
Page : 537 pages
File Size : 54,5 Mb
Release : 2015-01-02
Category : Technology & Engineering
ISBN : 9783662443958

Get Book

Micro and Nano Fabrication by Hans H. Gatzen,Volker Saile,Jürg Leuthold Pdf

For Microelectromechanical Systems (MEMS) and Nanoelectromechanical Systems (NEMS) production, each product requires a unique process technology. This book provides a comprehensive insight into the tools necessary for fabricating MEMS/NEMS and the process technologies applied. Besides, it describes enabling technologies which are necessary for a successful production, i.e., wafer planarization and bonding, as well as contamination control.

Author : Eugenio Iannone
Publisher : CRC Press
Page : 1351 pages
File Size : 47,6 Mb
Release : 2018-09-03
Category : Medical
ISBN : 9781351832069

Get Book

Labs on Chip by Eugenio Iannone Pdf

Labs on Chip: Principles, Design and Technology provides a complete reference for the complex field of labs on chip in biotechnology. Merging three main areas— fluid dynamics, monolithic micro- and nanotechnology, and out-of-equilibrium biochemistry—this text integrates coverage of technology issues with strong theoretical explanations of design techniques. Analyzing each subject from basic principles to relevant applications, this book: Describes the biochemical elements required to work on labs on chip Discusses fabrication, microfluidic, and electronic and optical detection techniques Addresses planar technologies, polymer microfabrication, and process scalability to huge volumes Presents a global view of current lab-on-chip research and development Devotes an entire chapter to labs on chip for genetics Summarizing in one source the different technical competencies required, Labs on Chip: Principles, Design and Technology offers valuable guidance for the lab-on-chip design decision-making process, while exploring essential elements of labs on chip useful both to the professional who wants to approach a new field and to the specialist who wants to gain a broader perspective.

Author : Ernst Obermeier
Publisher : Springer
Page : 1763 pages
File Size : 42,6 Mb
Release : 2016-05-12
Category : Technology & Engineering
ISBN : 9783642594977

Get Book

Transducers ’01 Eurosensors XV by Ernst Obermeier Pdf

The Conference is the premier international meeting for the presentation of original work addressing all aspects of the theory, design, fabrication, assembly, packaging, testing and application of solid-state sensors, actuators, MEMS, and microsystems.

Author : Ghenadii Korotcenkov
Publisher : CRC Press
Page : 503 pages
File Size : 48,6 Mb
Release : 2020-01-24
Category : Science
ISBN : 9781351056496

Get Book

Handbook of Humidity Measurement, Volume 3 by Ghenadii Korotcenkov Pdf

Because of unique water properties, humidity affects materials and many living organisms, including humans. Humidity control is important in various fields, from production management to creating a comfortable living environment. The range of materials that can be used in the development of humidity sensors is very broad, and the third volume of the Handbook of Humidity Measurement offers an analysis on various humidity-sensitive materials and sensor technologies used in the fabrication of humidity sensors and methods acceptable for their testing. Additional features include: numerous strategies for the fabrication and characterization of humidity-sensitive materials and sensing structures used in sensor applications, methods and properties to develop smaller, cheaper, more robust, and accurate devices with better sensitivity and stability, a guide to sensor selection and an overview of the humidity sensor market, and new technology solutions for integration, miniaturization, and specificity of the humidity sensor calibration. Handbook of Humidity Measurement, Volume 3: Sensing Materials and Technologies provides valuable information for practicing engineers, measurement experts, laboratory technicians, project managers in industries and national laboratories, and university students and professors interested in solutions to humidity measurement tasks. Despite the fact that this book is devoted to the humidity sensors, it can be used as a basis for understanding fundamentals of any gas sensor operation and development.

Author : Reza Ghodssi,Pinyen Lin
Publisher : Springer Science & Business Media
Page : 1211 pages
File Size : 50,5 Mb
Release : 2011-03-18
Category : Technology & Engineering
ISBN : 9780387473185

Get Book

MEMS Materials and Processes Handbook by Reza Ghodssi,Pinyen Lin Pdf

MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.

Author : Bo Cui
Publisher : BoD – Books on Demand
Page : 630 pages
File Size : 55,8 Mb
Release : 2011-12-02
Category : Science
ISBN : 9789533076027

Get Book

Recent Advances in Nanofabrication Techniques and Applications by Bo Cui Pdf

Nanotechnology has experienced a rapid growth in the past decade, largely owing to the rapid advances in nanofabrication techniques employed to fabricate nano-devices. Nanofabrication can be divided into two categories: "bottom up" approach using chemical synthesis or self assembly, and "top down" approach using nanolithography, thin film deposition and etching techniques. Both topics are covered, though with a focus on the second category. This book contains twenty nine chapters and aims to provide the fundamentals and recent advances of nanofabrication techniques, as well as its device applications. Most chapters focus on in-depth studies of a particular research field, and are thus targeted for researchers, though some chapters focus on the basics of lithographic techniques accessible for upper year undergraduate students. Divided into five parts, this book covers electron beam, focused ion beam, nanoimprint, deep and extreme UV, X-ray, scanning probe, interference, two-photon, and nanosphere lithography.

Author : John Burns
Publisher : Unknown
Page : 556 pages
File Size : 46,5 Mb
Release : 1838
Category : Surgery
ISBN : UIUC:30112106699082

Get Book

The surgical anatomy of the human body, and its application to injuries, and operations by John Burns Pdf

Author : Robert Wray Hamm,Marianne Elizabeth Hamm
Publisher : World Scientific
Page : 436 pages
File Size : 42,9 Mb
Release : 2012
Category : Science
ISBN : 9789814307048

Get Book

Industrial Accelerators and Their Applications by Robert Wray Hamm,Marianne Elizabeth Hamm Pdf

This unique new book is a comprehensive review of the many current industrial applications of particle accelerators, written by experts in each of these fields. Readers will gain a broad understanding of the principles of these applications, the extent to which they are employed, and the accelerator technology utilized. The book also serves as a thorough introduction to these fields for non-experts and laymen. Due to the increased interest in industrial applications, there is a growing interest among accelerator physicists and many other scientists worldwide in understanding how accelerators are used in various applications. The government agencies that fund scientific research with accelerators are also seeking more information on the many commercial applications that have been or can be developed with the technology developments they are funding. Many industries are also doing more research on how they can improve their products or processes using particle beams

Author : M.S.J. Hashmi
Publisher : Elsevier
Page : 1467 pages
File Size : 55,5 Mb
Release : 2016-08-29
Category : Technology & Engineering
ISBN : 9780128032503

Get Book

Comprehensive Materials Finishing by M.S.J. Hashmi Pdf

Finish Manufacturing Processes are those final stage processing techniques which are deployed to bring a product to readiness for marketing and putting in service. Over recent decades a number of finish manufacturing processes have been newly developed by researchers and technologists. Many of these developments have been reported and illustrated in existing literature in a piecemeal manner or in relation only to specific applications. For the first time, Comprehensive Materials Finishing, Three Volume Set integrates a wide body of this knowledge and understanding into a single, comprehensive work. Containing a mixture of review articles, case studies and research findings resulting from R & D activities in industrial and academic domains, this reference work focuses on how some finish manufacturing processes are advantageous for a broad range of technologies. These include applicability, energy and technological costs as well as practicability of implementation. The work covers a wide range of materials such as ferrous, non-ferrous and polymeric materials. There are three main distinct types of finishing processes: Surface Treatment by which the properties of the material are modified without generally changing the physical dimensions of the surface; Finish Machining Processes by which a small layer of material is removed from the surface by various machining processes to render improved surface characteristics; and Surface Coating Processes by which the surface properties are improved by adding fine layer(s) of materials with superior surface characteristics. Each of these primary finishing processes is presented in its own volume for ease of use, making Comprehensive Materials Finishing an essential reference source for researchers and professionals at all career stages in academia and industry. Provides an interdisciplinary focus, allowing readers to become familiar with the broad range of uses for materials finishing Brings together all known research in materials finishing in a single reference for the first time Includes case studies that illustrate theory and show how it is applied in practice

Author : George Q. Huang,K.L. Mak,Paul G. Maropoulos
Publisher : Springer Science & Business Media
Page : 1754 pages
File Size : 44,9 Mb
Release : 2009-12-12
Category : Technology & Engineering
ISBN : 9783642104305

Get Book

Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology by George Q. Huang,K.L. Mak,Paul G. Maropoulos Pdf

This Proceedings volume contains articles presented at the CIRP-Sponsored Inter- tional Conference on Digital Enterprise Technology (DET2009) that takes place December 14–16, 2009 in Hong Kong. This is the 6th DET conference in the series and the first to be held in Asia. Professor Paul Maropoulos initiated, hosted and chaired the 1st International DET Conference held in 2002 at the University of D- ham. Since this inaugural first DET conference, DET conference series has been s- cessfully held in 2004 at Seattle, Washington USA, in 2006 at Setubal Portugal, in 2007 at Bath England, and in 2008 at Nantes France. The DET2009 conference continues to bring together International expertise from the academic and industrial fields, pushing forward the boundaries of research kno- edge and best practice in digital enterprise technology for design and manufacturing, and logistics and supply chain management. Over 120 papers from over 10 countries have been accepted for presentation at DET2009 and inclusion in this Proceedings volume after stringent refereeing process. On behalf of the organizing and program committees, the Editors are grateful to the many people who have made DET2009 possible: to the authors and presenters, es- cially the keynote speakers, to those who have diligently reviewed submissions, to members of International Scientific Committee, Organizing Committee and Advisory Committes, and to colleagues for their hard work in sorting out all the arrangements. We would also like to extend our gratitude to DET2009 sponsors, co-organizers, and supporting organizations.

Author : Marc J. Madou
Publisher : CRC Press
Page : 764 pages
File Size : 42,7 Mb
Release : 2018-10-08
Category : Technology & Engineering
ISBN : 9781482274004

Get Book

Fundamentals of Microfabrication by Marc J. Madou Pdf

MEMS technology and applications have grown at a tremendous pace, while structural dimensions have grown smaller and smaller, reaching down even to the molecular level. With this movement have come new types of applications and rapid advances in the technologies and techniques needed to fabricate the increasingly miniature devices that are literally changing our world. A bestseller in its first edition, Fundamentals of Microfabrication, Second Edition reflects the many developments in methods, materials, and applications that have emerged recently. Renowned author Marc Madou has added exercise sets to each chapter, thus answering the need for a textbook in this field. Fundamentals of Microfabrication, Second Edition offers unique, in-depth coverage of the science of miniaturization, its methods, and materials. From the fundamentals of lithography through bonding and packaging to quantum structures and molecular engineering, it provides the background, tools, and directions you need to confidently choose fabrication methods and materials for a particular miniaturization problem. New in the Second Edition Revised chapters that reflect the many recent advances in the field Updated and enhanced discussions of topics including DNA arrays, microfluidics, micromolding techniques, and nanotechnology In-depth coverage of bio-MEMs, RF-MEMs, high-temperature, and optical MEMs. Many more links to the Web Problem sets in each chapter