Microstructural Characterization Of Materials

Author : David Brandon,Wayne D. Kaplan
Publisher : John Wiley & Sons
Page : 517 pages
File Size : 46,6 Mb
Release : 2013-03-21
Category : Technology & Engineering
ISBN : 9781118681480

Get Book

Microstructural Characterization of Materials by David Brandon,Wayne D. Kaplan Pdf

Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.

Author : David Brandon,Wayne D. Kaplan
Publisher : Wiley
Page : 550 pages
File Size : 41,6 Mb
Release : 2008-05-23
Category : Technology & Engineering
ISBN : 9780470727126

Get Book

Microstructural Characterization of Materials by David Brandon,Wayne D. Kaplan Pdf

Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who?will find the book a useful and comprehensive general reference source.

Author : David Brandon,Wayne D. Kaplan
Publisher : Wiley
Page : 0 pages
File Size : 43,7 Mb
Release : 2008-06-03
Category : Technology & Engineering
ISBN : 0470027851

Get Book

Microstructural Characterization of Materials by David Brandon,Wayne D. Kaplan Pdf

Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.

Author : Karen Scrivener,Ruben Snellings,Barbara Lothenbach
Publisher : CRC Press
Page : 540 pages
File Size : 43,6 Mb
Release : 2018-10-09
Category : Technology & Engineering
ISBN : 9781498738675

Get Book

A Practical Guide to Microstructural Analysis of Cementitious Materials by Karen Scrivener,Ruben Snellings,Barbara Lothenbach Pdf

A Practical Guide from Top-Level Industry Scientists As advanced teaching and training in the development of cementitious materials increase, the need has emerged for an up-to-date practical guide to the field suitable for graduate students and junior and general practitioners. Get the Best Use of Different Techniques and Interpretations of the Results This edited volume provides the cement science community with a state-of-the-art overview of analytical techniques used in cement chemistry to study the hydration and microstructure of cements. Each chapter focuses on a specific technique, not only describing the basic principles behind the technique, but also providing essential, practical details on its application to the study of cement hydration. Each chapter sets out present best practice, and draws attention to the limitations and potential experimental pitfalls of the technique. Databases that supply examples and that support the analysis and interpretation of the experimental results strengthen a very valuable ready reference. Utilizing the day-to-day experience of practical experts in the field, this book: Covers sample preparation issues Discusses commonly used techniques for identifying and quantifying the phases making up cementitious materials (X-ray diffraction and thermogravimetric analysis) Presents good practice oncalorimetry and chemical shrinkage methods for studying cement hydration kinetics Examines two different applications of nuclear magnetic resonance (solid state NMR and proton relaxometry) Takes a look at electron microscopy, the preeminent microstructural characterization technique for cementitious materials Explains how to use and interpret mercury intrusion porosimetry Details techniques for powder characterization of cementitious materials Outlines the practical application of phase diagrams for hydrated cements Avoid common pitfalls by using A Practical Guide to Microstructural Analysis of Cementitious Materials. A one-of-a-kind reference providing the do’s and don’ts of cement chemistry, the book presents the latest research and development of characterisation techniques for cementitious materials, and serves as an invaluable resource for practicing professionals specializing in cement and concrete materials and other areas of cement and concrete technology.

Author : Gerhard Huebschen,Iris Altpeter,Ralf Tschuncky,Hans-Georg Herrmann
Publisher : Woodhead Publishing
Page : 320 pages
File Size : 43,9 Mb
Release : 2016-03-23
Category : Technology & Engineering
ISBN : 9780081000571

Get Book

Materials Characterization Using Nondestructive Evaluation (NDE) Methods by Gerhard Huebschen,Iris Altpeter,Ralf Tschuncky,Hans-Georg Herrmann Pdf

Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques Reviews the determination of microstructural and mechanical properties Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials

Author : Joachim Ohser,Frank Mücklich
Publisher : John Wiley & Sons
Page : 420 pages
File Size : 45,5 Mb
Release : 2000-12-19
Category : Mathematics
ISBN : 9780471974864

Get Book

Statistical Analysis of Microstructures in Materials Science by Joachim Ohser,Frank Mücklich Pdf

The investigation of the origin and formation of microstructures and the effect that microstructure has on the properties of materials are important issues in materials science and technology. Geometrical analysis is often the key to understanding the formation of microstructures and the resulting material properties. The authors make use of mathematical morphology, spatial statistics, image processing, stereology and stochastic geometry to analyze microstructures arising in materials science. * Quantitative microstructure analysis is one of the most successful experimental techniques in materials science * Uses examples to demonstrate the techniques * Program code included enables the reader to apply the numerous algorithms * Accessible to material scientists with limited statistical knowledge Primarily aimed at applied materials scientists, the book will also appeal to those working and researching in earth sciences, material technology, mineralogy, petrography, image analysis, cytology and biology.

Author : Wayne D. Kaplan
Publisher : Unknown
Page : 115 pages
File Size : 44,8 Mb
Release : 2011
Category : Materials
ISBN : OCLC:1289501029

Get Book

Microstructural Characterization of Materials by Wayne D. Kaplan Pdf

Author : M. A. Meyers,M Sarikaya,R. O. Ritchie
Publisher : Elsevier
Page : 317 pages
File Size : 44,7 Mb
Release : 2003-12-05
Category : Technology & Engineering
ISBN : 9780080537238

Get Book

Nano and Microstructural Design of Advanced Materials by M. A. Meyers,M Sarikaya,R. O. Ritchie Pdf

The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. Teaches effective use of advanced analysis and characterization methods at an atomistic level Contains many supporting examples of materials in which such design concepts have been successfully applied

Author : Eric J. Mittemeijer,Paolo Scardi
Publisher : Springer Science & Business Media
Page : 557 pages
File Size : 47,5 Mb
Release : 2013-11-21
Category : Science
ISBN : 9783662067239

Get Book

Diffraction Analysis of the Microstructure of Materials by Eric J. Mittemeijer,Paolo Scardi Pdf

Overview of diffraction methods applied to the analysis of the microstructure of materials. Since crystallite size and the presence of lattice defects have a decisive influence on the properties of many engineering materials, information about this microstructure is of vital importance in developing and assessing materials for practical applications. The most powerful and usually non-destructive evaluation techniques available are X-ray and neutron diffraction. The book details, among other things, diffraction-line broadening methods for determining crystallite size and atomic-scale strain due, e.g. to dislocations, and methods for the analysis of residual (macroscale) stress. The book assumes only a basic knowledge of solid-state physics and supplies readers sufficient information to apply the methods themselves.

Author : Manfred Rühle,Frank Ernst
Publisher : Springer Science & Business Media
Page : 460 pages
File Size : 51,8 Mb
Release : 2003-01-31
Category : Medical
ISBN : 3540418180

Get Book

High-Resolution Imaging and Spectrometry of Materials by Manfred Rühle,Frank Ernst Pdf

This book gives a survey of and systematic introduction to high-resolution electron microscopy. The method is carefully discussed, the latest developments are reported, and the application to surface and interface analysis and to the study of hidden structures is presented. The book arises from research carried out at one of the world's leading centers of electron microscopy. It will appeal to researchers and advanced students.

Author : J. McCall
Publisher : Springer Science & Business Media
Page : 344 pages
File Size : 49,5 Mb
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 9781461586937

Get Book

Microstructural Analysis by J. McCall Pdf

During recent years, people involved in developing new metals and materials for use in some of the rather extreme conditions of stress, temperature, and environment have relied heavily on the microstructural condition of their materials. In fact, many of the newer materials, such as dispersion-strengthened alloys, have been designed almost entirely by first determining the microstruc ture desired and then finding the right combination of composition, heat treatment, and mechanical working that will result in the de sired microstructure. Furthermore, the extremely high reliability required of materials used today, for example, in aerospace and nuclear energy systems, requires close control on the microstruc tural conditions of materials. This is clearly evident from even a cursory examination of recently written specifications for mate rials where rather precise microstructural parameters are stipu lated. Whereas specifications written several years ago may have included microstructural requirements for details such as ASTM grain size or graphite type, today's specifications are beginning to include such things as volume fraction of phases, mean free path of particles, and grain intercept distances. Rather arbitrary terms such as "medium pearlite" have been replaced by requirements such as "interlamella spacing not to exceed 0. 1 micron. " Finally, materials users have become increasingly aware that when a material does fail, the reason for its failure may be found by examining and "reading" its microstructure. The responsibility for a particular microstructure and a resulting failure is a matter of growing importance in current product liability consider ations.

Author : Sarfraj Ahmed,Vinayak S. Dakre
Publisher : John Wiley & Sons
Page : 300 pages
File Size : 49,8 Mb
Release : 2022-01-07
Category : Technology & Engineering
ISBN : 9781119818854

Get Book

Tribology and Characterization of Surface Coatings by Sarfraj Ahmed,Vinayak S. Dakre Pdf

TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.

Author : Yang Leng
Publisher : John Wiley & Sons
Page : 384 pages
File Size : 47,5 Mb
Release : 2009-03-04
Category : Technology & Engineering
ISBN : 9780470822999

Get Book

Materials Characterization by Yang Leng Pdf

This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.

Author : Dmitri A. Molodov
Publisher : John Wiley & Sons
Page : 524 pages
File Size : 54,7 Mb
Release : 2013-07-17
Category : Technology & Engineering
ISBN : 9783527652839

Get Book

Microstructural Design of Advanced Engineering Materials by Dmitri A. Molodov Pdf

The choice of a material for a certain application is made taking into account its properties. If, for example one would like to produce a table, a hard material is needed to guarantee the stability of the product, but the material should not be too hard so that manufacturing is still as easy as possible - in this simple example wood might be the material of choice. When coming to more advanced applications the required properties are becoming more complex and the manufacturer`s desire is to tailor the properties of the material to fit the needs. To let this dream come true, insights into the microstructure of materials is crucial to finally control the properties of the materials because the microstructure determines its properties. Written by leading scientists in the field of microstructural design of engineering materials, this book focuses on the evolution and behavior of granular microstructures of various advanced materials during plastic deformation and treatment at elevated temperatures. These topics provide essential background and practical information for materials scientists, metallurgists and solid state physicists.

Author : Eric Lifshin
Publisher : John Wiley & Sons
Page : 277 pages
File Size : 53,7 Mb
Release : 2008-07-11
Category : Technology & Engineering
ISBN : 9783527613755

Get Book

X-ray Characterization of Materials by Eric Lifshin Pdf

Linking of materials properties with microstructures is a fundamental theme in materials science, for which a detailed knowledge of the modern characterization techniques is essential. Since modern materials such as high-temperature alloys, engineering thermoplastics and multilayer semiconductor films have many elemental constituents distributed in more than one phase, characterization is essential to the systematic development of such new materials and understanding how they behave in practical applications. X-ray techniques play a major role in providing information on the elemental composition and crystal and grain structures of all types of materials. The challenge to the materials characterization expert is to understand how specific instruments and analytical techniques can provide detailed information about what makes each material unique. The challenge to the materials scientist, chemist, or engineer is to know what information is needed to fully characterize each material and how to use this information to explain its behavior, develop new and improved properties, reduce costs, or ensure compliance with regulatory requirements. This comprehensive handbook presents all the necessary background to understand the applications of X-ray analysis to materials characterization with particular attention to the modern approach to these methods.