Particles On Surfaces Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of Particles On Surfaces book. This book definitely worth reading, it is an incredibly well-written.
This work comprises the proceedings of the Fourth Symposium on Particles on Surfaces. Papers cover: adhesion-induced deformations of particles on surfaces; the use of atomic force microscopy in probing particle-particle adhesion; particle contamination in microelectronics, on spacecraft, and on optical surfaces; the role of air ionization in reducing surface contamination by particles in the cleanroom; abrasive blasting media for contamination-free deburring processes; and more.;The book is intended for physical, chemical, surface and colloid chemists, materials scientists; polymers, plastics, electrical and electronics, computer, chemical and mechanical engineers; and upper-level undergraduate and graduate students in these disciplines.
This volume chronicles the proceedings of the Symposium on Particles on Surfaces: Detection, Adhesion and Removal held under the auspices of the Fine Particle Society in San Francisco, July 28-August 2, 1986. The study of particles on surfaces is extremely important in many areas of human endeavor (ranging from microelectronics to optics to biomedical). A complete catalog of modern precision and sophisticated technologies where particles on surfaces are of cardinal importance will be prohibitively long, but the following eclectic examples should underscore the concern about particles on a variety of surfaces. In the semiconductor world of shrinking dimensions, particles which, a few years ago, were cosmetically undesirable but functionally innocuous can potentially be killer defects now. As the device sizes get smaller, there will be more and more concern about smaller and smaller particles. In the information storage technology, the gap between the head and the disk is very narrow, and if a particle is trapped in the gap that can have very grave consequences. The implications of particulate contamination on sensitive optical surfaces is all too manifest. So the particulate contamination on surfaces is undesirable from functional, yield and reliability points of view. This symposium was organized with the following objectives in mind: to bring together active practitioners in this field; to provide a forum for discussion of the latest research and development activities in this area; to provide opportunity for cross-pollination of ideas; and to highlight topics which needed intensified effort.
This volume chronicles the proceedings of the Symposium on Particles on Surfaces: Detection, Adhesion and Removal held under the auspices of the Fine Particle Society in San Francisco, July 28-August 2, 1986. The study of particles on surfaces is extremely important in many areas of human endeavor (ranging from microelectronics to optics to biomedical). A complete catalog of modern precision and sophisticated technologies where particles on surfaces are of cardinal importance will be prohibitively long, but the following eclectic examples should underscore the concern about particles on a variety of surfaces. In the semiconductor world of shrinking dimensions, particles which, a few years ago, were cosmetically undesirable but functionally innocuous can potentially be killer defects now. As the device sizes get smaller, there will be more and more concern about smaller and smaller particles. In the information storage technology, the gap between the head and the disk is very narrow, and if a particle is trapped in the gap that can have very grave consequences. The implications of particulate contamination on sensitive optical surfaces is all too manifest. So the particulate contamination on surfaces is undesirable from functional, yield and reliability points of view. This symposium was organized with the following objectives in mind: to bring together active practitioners in this field; to provide a forum for discussion of the latest research and development activities in this area; to provide opportunity for cross-pollination of ideas; and to highlight topics which needed intensified effort.
This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.
This volume documents the proceedings of the Second Symposium on Particles on Surfaces: Detection, Adhesion and Removal held as part of the 19th Annual Meeting of the Fine Particle Society in Santa Clara, California, July 20-25, 1988. The premier symposium on this topic was l organized in 1986 and has been properly chronicled . Based on the success of these two events and the high interest evinced by the technical community, we plan to regularly hold symposia on this topic on a biennial basis and the next one is slated for August 20-24, 1990 in San Diego, California. l As pointed out in the Preface to the first volume , the topic of particles on surfaces is of paramount importance in legion of technological areas. Particularly in the semiconductor device fabrication area, all signals indicate that the understanding of the behavior of particles on surfaces and their removal will attain heightened importance in the times to come. As the device dimensions are shrinking at an accelerated pace, so the benign particles of today will become the killer defects in the not too distant future. The tempo of research and development activity in the field of particles on surfaces is very high, and better and novel ways are continuously being devised to remove smaller and smaller particles.
Particles on Surfaces: Detection, Adhesion and Removal, Volume 7 by Kash L. Mittal Pdf
This volume documents the proceedings of the 7th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Newark, NJ, June 19-21, 2000. The study of particles on surfaces is extremely important in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. This volume contains a total of 28 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. This volume is divided into two parts: 1) Particle Analysis and General Cleaning-Related Topics; and 2) Particle Adhesion and Removal. The topics covered include: surface analysis techniques for particle identification; cleaning, rinsing and drying issues in post-CMP cleaning; fundamental forces involved in particle adhesion; factors affecting adhesion of small (nanosize) particles; factors important in particle detachment; particle adhesion measurement by AFM; various (wet and dry) techniques for particle removal, e.g., laser, ultrasonic, megasonic, use of surfactants; toner particles and pharmaceutical particles. This volume offers a wealth of information on the tremendously technologically important field of particles on surfaces and should provide a consolidated source of current R&D activity in this arena. Therefore, it will be of value and use to anyone interested in the topic of particles on surfaces.
Particles on Surfaces: Detection, Adhesion and Removal by Kash L. Mittal Pdf
This volume chronicles the proceedings of the 9th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Philadelphia, PA, June 2004. The study of particles on surfaces is crucially important in a legion of diverse technological areas, ranging from microelectronics to biomedical to space. This volume contains a total of 21 papers covering many ramifications of particles on surfaces, ranging from detection to removal. All manuscripts were rigorously peer-reviewed and revised, and properly edited before inclusion in this book. The topics covered include: imaging and analysis of macro and nanosize particles and surface features; determination of particles on surfaces; laser inactivation on surfaces; laser-assisted nanofabrication on surfaces; post-CMP cleaning process; pre-gate cleaning; solar panel obscuration in the Martian atmosphere; adhesion and friction of microsized particles; microroughness of textile fibers and capture of particles; factors affecting particle adhesion and removal; various techniques for cleaning or removal of particles from different substrates including laser, combination of laser-induced shockwave and explosive vaporization of liquid, attenuated total internal reflection of laser light, CO2 snow, use of dense phase fluids, use of surfactants and impinging air jet; and removal of sub-100-nm particles.
This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.
Particles on Surfaces: Detection, Adhesion and Removal by Kash L. Mittal Pdf
This volume documents the proceedings of the 8th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Providence, Rhode Island, June 24a26, 2002. The study of particles on surfaces is extremely crucial in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. In a world o
Particles on Surfaces Five and Six by Kashmiri Lal Mittal Pdf
This volume documents the Proceedings of the 5th and 6th Symposia on Particles on Surfaces: Detection, Adhesion and Removal, held under the aegis of the Fine Particle Society in Chicago (May 6--9, 1996) and Dallas (April 1--3, 1998), respectively. The technical programs clearly reflected an interest and need to ameliorate the existing methods and to devise new and more efficient ways to detect, analyze and characterize particles on surfaces. The removal of particles from a host of surfaces was especially highlighted; the need to remove smaller and smaller particles was particularly underscored. All manuscripts included in this volume were properly peer reviewed and all were revised before inclusion in this volume. Thus, this book is not a mere collection of unreviewed papers, but represents information that has passed peer scrutiny. Furthermore, the authors of the 5th Symposium were asked to update the information. So, the information presented in this book should be as fresh and up-to-date as possible. This volume is divided into two parts: Part 1. General Papers and Part 2. Particle Adhesion and Removal. The topics covered include: high-sensitivity rapid detection of particles; detection of particles using evanescent wave scattering; particles on the backside of wafers; particle shedding from fluid-handling components; dynamics of particle adhesion; particle dispersion/aggregation; precision cleaning; and particle removal by surfactants, supercritical fluids, hydrodynamic forces, high-speed droplet impinging, megasonic, CO2 blasting, CO2 snow, argon aerosol, lasers, microcluster beams, brush and chemical-mechanical methods. This volume offers bountiful information and represent a current commentary on the R&D activity taking place in the area of particles on surfaces, particularly particle removal from a variety of surfaces.
Self-Cleaning of Surfaces and Water Droplet Mobility by Bekir Sami Yilbas,Abdullah Al-Sharafi,Haider Ali Pdf
Self-Cleaning of Surfaces and Water Droplet Mobility deals with the self-cleaning of hydrophobic surfaces. Chapters cover the basics of wetting states of fluids and surface characteristics in terms of texture topology and free energy. The self-cleaning aspects of surfaces, such as various synthesizing and fabrication processes are then introduced and discussed, along with environmental dust properties, including elemental compositions, particle sizes and shapes, and their chemo-mechanics characteristics. In addition, mud formation in humid air, as well as ambient and dry mud adhesion on optically transparent surfaces is explored, as is water droplet dynamics on hydrophilic and hydrophobic surfaces, amongst other topics. The book fills the gap between the physical fundamentals of surface energy and texture characteristics for practical applications of surface cleaning and provides a basic understanding of the self-cleaning of surfaces that will be idea for academics, researchers and students. Showcases the fundamental aspects of the self-cleaning of surfaces Includes practical applications in energy and other sectors Contains a review of the characterization of environmental dust on hydrophilic and hydrophobic surfaces Discusses the fabrication and optimization of surfaces towards self-cleaning Presents practical applications of the self-cleaning of surfaces via water droplet mobility
Particles on Surfaces: Detection, Adhesion and Removal, Volume 7 by Anonim Pdf
This volume documents the proceedings of the 7th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Newark, NJ, June 19-21, 2000. The study of particles on surfaces is extremely important in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. This volume contains a total of 28 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. This volume is divided into two parts: 1) Particle Analysis and General Cleaning-Related Topics; and 2) Particle Adhesion and Removal. The topics covered include: surface analysis techniques for particle identification; cleaning, rinsing and drying issues in post-CMP cleaning; fundamental forces involved in particle adhesion; factors affecting adhesion of small (nanosize) particles; factors important in particle detachment; particle adhesion measurement by AFM; various (wet and dry) techniques for particle removal, e.g., laser, ultrasonic, megasonic, use of surfactants; toner particles and pharmaceutical particles. This volume offers a wealth of information on the tremendously technologically important field of particles on surfaces and should provide a consolidated source of current R&D activity in this arena. Therefore, it will be of value and use to anyone interested in the topic of particles on surfaces.
Particle-particle Adhesion In Pharmaceutical Powder Handling by Fridrun Podczeck Pdf
This monograph describes the physical principles of adhesion between particles and surfaces. These principles are applied to pharmaceutical processes involved in the manufacture of solid dosage forms such as powders, granules, tablets and dry powder inhalations. To help in the understanding of these systems, physical properties of solid surfaces, and an introduction to the theory of friction is given. Techniques for measuring particle adhesion and fracture mechanical properties of powders are introduced, as far as these are relevant to the processes discussed. The philosophy of the book deviates from that of standard pharmaceutical textbooks, in that it focuses primarily on physical principles involved in the manufacture of dosage forms rather than describing these processes purely by observation.
Pigments, Extenders, and Particles in Surface Coatings and Plastics by Michael Diebold,Steven De Backer,Philipp M. Niedenzu,Brett R. Hester,Frank A. C. Vanhecke Pdf
This book discusses the diverse array of particles that are found in coatings from both a physical and a performance standpoint. It also describes the fundamentals of particle behavior and shows how these affect the performance and properties of their end-use applications. It consists of nineteen chapters, demonstrating the wide range of types of particles found in coatings as well as the diversity of the important attributes they hold. The authors also present a forward looking view of current issues and trends in the coatings industry. In addition, a chapter on the use of particles in paper laminate, a closely aligned field, is included. This book is of interest to formulators of any type of coatings as well as researchers in aligned fields that use high volumes of small particles, such as the plastics and paper industries.
Theory and Application of Morphological Analysis by David W. Luerkens Pdf
This book is one in a series dedicated to fine particle science and technology. Topics covered in the book include the role of definitions, concepts, hypothesis, and laws; morphological analysis of fine particles and surfaces; analytical three-dimensional representations of particle and surface morphologies; the problem of invariance with respect to rotational transformations, as well as transformations characterized by reflection and inversion; matrix mechanics of particle characterization; and general applications of morphological analysis in other areas of science.
