Design And Optimization Of Hybrid Electric Vehicle Drivetrain And Control Strategy Parameters Using Evolutionary Algorithms
Design And Optimization Of Hybrid Electric Vehicle Drivetrain And Control Strategy Parameters Using Evolutionary Algorithms Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of Design And Optimization Of Hybrid Electric Vehicle Drivetrain And Control Strategy Parameters Using Evolutionary Algorithms book. This book definitely worth reading, it is an incredibly well-written.
Design and Optimization of Hybrid Electric Vehicle Drivetrain and Control Strategy Parameters Using Evolutionary Algorithms by Chirag Desai Pdf
Advanced propulsion technologies such as hybrid electric vehicles (HEVs) have demonstrated improved fuel economy with lower emissions compared to conventional vehicles. Superior HEV performance in terms of higher fuel economy and lower emissions, with satisfaction of driving performance, necessitates a careful balance of drivetrain component design as well as control strategy parameter monitoring and tuning. In this thesis, an evolutionary global optimization-based derivative-free, multi-objective genetic algorithm (MOGA) is proposed, to optimize the component sizing of a NOVA® parallel hybrid electric transit bus drivetrain. In addition, the proposed technique has been extended to the design of an optimal supervisory control strategy for effective on-board energy management. The proposed technique helps find practical trade off-solutions for the objectives. Simulation test results depict the tremendous potential of the proposed optimization technique in terms of improved fuel economy and lower emissions (nitrous-oxide, NOx, carbon monoxide, CO, and hydrocarbons, HC). The tests were conducted under varying drive cycles and control strategies.
Hybrid Systems, Optimal Control and Hybrid Vehicles by Thomas J. Böhme,Benjamin Frank Pdf
This book assembles new methods showing the automotive engineer for the first time how hybrid vehicle configurations can be modeled as systems with discrete and continuous controls. These hybrid systems describe naturally and compactly the networks of embedded systems which use elements such as integrators, hysteresis, state-machines and logical rules to describe the evolution of continuous and discrete dynamics and arise inevitably when modeling hybrid electric vehicles. They can throw light on systems which may otherwise be too complex or recondite. Hybrid Systems, Optimal Control and Hybrid Vehicles shows the reader how to formulate and solve control problems which satisfy multiple objectives which may be arbitrary and complex with contradictory influences on fuel consumption, emissions and drivability. The text introduces industrial engineers, postgraduates and researchers to the theory of hybrid optimal control problems. A series of novel algorithmic developments provides tools for solving engineering problems of growing complexity in the field of hybrid vehicles. Important topics of real relevance rarely found in text books and research publications—switching costs, sensitivity of discrete decisions and there impact on fuel savings, etc.—are discussed and supported with practical applications. These demonstrate the contribution of optimal hybrid control in predictive energy management, advanced powertrain calibration, and the optimization of vehicle configuration with respect to fuel economy, lowest emissions and smoothest drivability. Numerical issues such as computing resources, simplifications and stability are treated to enable readers to assess such complex systems. To help industrial engineers and managers with project decision-making, solutions for many important problems in hybrid vehicle control are provided in terms of requirements, benefits and risks.
Vehicle Power Management addresses the challenge of improving vehicle fuel economy and reducing emissions without sacrificing vehicle performance, reliability and durability. It opens with the definition, objectives, and current research issues of vehicle power management, before moving on to a detailed introduction to the modeling of vehicle devices and components involved in the vehicle power management system, which has been proven to be the most cost-effective and efficient method for initial-phase vehicle research and design. Specific vehicle power management algorithms and strategies, including the analytical approach, optimal control, intelligent system approaches and wavelet technology, are derived and analyzed for realistic applications. Vehicle Power Management also gives a detailed description of several key technologies in the design phases of hybrid electric vehicles containing battery management systems, component optimization, hardware-in-the-loop and software-in-the-loop. Vehicle Power Management provides graduate and upper level undergraduate students, engineers, and researchers in both academia and the automotive industry, with a clear understanding of the concepts, methodologies, and prospects of vehicle power management.
Applications of Evolutionary Computation by Giovanni Squillero,Paolo Burelli Pdf
The two volumes LNCS 9597 and 9598 constitute the refereed conference proceedings of the 19th European Conference on the Applications of Evolutionary Computation, EvoApplications 2016, held in Porto, Portugal, in March/April 2016, co-located with the Evo* 2016 events EuroGP, EvoCOP, and EvoMUSART. The 57 revised full papers presented together with 17 poster papers were carefully reviewed and selected from 115 submissions. EvoApplications 2016 consisted of the following 13 tracks: EvoBAFIN (natural computing methods in business analytics and finance), EvoBIO (evolutionary computation, machine learning and data mining in computational biology), EvoCOMNET (nature-inspired techniques for telecommunication networks and other parallel and distributed systems), EvoCOMPLEX (evolutionary algorithms and complex systems), EvoENERGY (evolutionary computation in energy applications), EvoGAMES (bio-inspired algorithms in games), EvoIASP (evolutionary computation in image analysis, signal processing, and pattern recognition), EvoINDUSTRY (nature-inspired techniques in industrial settings), EvoNUM (bio-inspired algorithms for continuous parameter optimization), EvoPAR (parallel implementation of evolutionary algorithms), EvoRISK (computational intelligence for risk management, security and defence applications), EvoROBOT (evolutionary robotics), and EvoSTOC (evolutionary algorithms in stochastic and dynamic environments).
Advances in Asian Mechanism and Machine Science by Nguyen Van Khang,Nguyen Quang Hoang,Marco Ceccarelli Pdf
This book presents the proceedings of the 6th IFToMM Asian Mechanisms and Machine Science Conference (Asian MMS), held in Hanoi, Vietnam on December 15-18, 2021. It includes peer-reviewed papers on the latest advances in mechanism and machine science, discussing topics such as biomechanical engineering, computational kinematics, the history of mechanism and machine science, gearing and transmissions, multi-body dynamics, robotics and mechatronics, the dynamics of machinery, tribology, vibrations, rotor dynamics and vehicle dynamics. A valuable, up-to-date resource, it offers an essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.
Electric and Plug-in Hybrid Vehicle Networks by Emanuele Crisostomi,Robert Shorten,Sonja Stüdli,Fabian Wirth Pdf
This book explores the behavior of networks of electric and hybrid vehicles. The topics that are covered include: energy management issues for aggregates of plug-in vehicles; the design of sharing systems to support electro-mobility; context awareness in the operation of electric and hybrid vehicles, and the role that this plays in a Smart City context; and tools to test and design massively large-scale networks of such vehicles. The book also introduces new and interesting control problems that are becoming prevalent in the EV-PHEV's context, as well as identifying some open questions. A particular focus of the book is on the opportunities afforded by networked actuation possibilities in electric and hybrid vehicles, and the role that such actuation may play in air-quality and emissions management.
Hybrid Electric Vehicles by Simona Onori,Lorenzo Serrao,Giorgio Rizzoni Pdf
This SpringerBrief deals with the control and optimization problem in hybrid electric vehicles. Given that there are two (or more) energy sources (i.e., battery and fuel) in hybrid vehicles, it shows the reader how to implement an energy-management strategy that decides how much of the vehicle’s power is provided by each source instant by instant. Hybrid Electric Vehicles: •introduces methods for modeling energy flow in hybrid electric vehicles; •presents a standard mathematical formulation of the optimal control problem; •discusses different optimization and control strategies for energy management, integrating the most recent research results; and •carries out an overall comparison of the different control strategies presented. Chapter by chapter, a case study is thoroughly developed, providing illustrative numerical examples that show the basic principles applied to real-world situations. The brief is intended as a straightforward tool for learning quickly about state-of-the-art energy-management strategies. It is particularly well-suited to the needs of graduate students and engineers already familiar with the basics of hybrid vehicles but who wish to learn more about their control strategies.
The Application of Ant Colony Optimization by Ali Soofastaei Pdf
The application of advanced analytics in science and technology is rapidly expanding, and developing optimization technics is critical to this expansion. Instead of relying on dated procedures, researchers can reap greater rewards by utilizing cutting-edge optimization techniques like population-based metaheuristic models, which can quickly generate a solution with acceptable quality. Ant Colony Optimization (ACO) is one the most critical and widely used models among heuristics and meta-heuristics. This book discusses ACO applications in Hybrid Electric Vehicles (HEVs), multi-robot systems, wireless multi-hop networks, and preventive, predictive maintenance.
Vehicle Propulsion Systems by Lino Guzzella,Antonio Sciarretta Pdf
In this book the longitudinal behavior of road vehicles is analyzed. The main emphasis is on the analysis and minimization of the fuel and energy consumption. Most approaches to this problem enhance the complexity of the vehicle system by adding components such as electrical motors or storage devices. Such a complex system can only be designed by means of mathematical models. This text gives an introduction to the modeling and optimization problems typically encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of classical and novel vehicle propulsion systems. Its focus lies on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms. This text has evolved from a lecture series at ETH Zurich. Prerequisites are general engineering topics and a first course in optimal control theory.
Simulation and Optimization of a Fuel Cell Hybrid Vehicle by Darren Brown Pdf
The goal of this research is to improve the design of a fuel cell battery hybrid vehicle through the use of an advanced vehicle powertrain simulator. The first part of this project involves the development of the simulation package from an existing MATLAB/Simulink based model. This model is modified and improved to more accurately simulate the real-world vehicle and also to allow for various parametric studies to be performed. The resulting simulation package is called Light, Fast, and Modifiable or LFM. Three different parametric studies are performed using the LFM simulation platform. The first involves vehicle design parameters. This experiment studies the effect of various vehicle parameters such as tire rolling resistance, vehicle mass, drag coefficient on vehicle performance. The second study involves hybrid control strategy parameters. The hybrid control strategy controls the flow of power between each of the power sources and is vital to proper vehicle performance. This experiment studies the effect of various scaling factors in the hybrid control strategy. The third parametric study involves the input drive cycle. A drive cycle is a speed vs. time data set that effectively "drives" the simulation. This experiment studies how different statistical quantities that describe a drive cycle (such as average speed, average acceleration, etc.) affect vehicle performance. Also using the LFM vehicle simulator, a new hybrid control strategy, called Drive Cycle Recognition (DCR), is developed and investigated. DCR involves classification of the current vehicle drive cycle (speed vs. time history) based on certain representative drive cycles. The identification is performed using the key statistical information explored in the drive cycle parametric study. It is shown that DCR can be used in a simulated environment to significantly improve upon the current strategy by addressing faults in the most sensitive parameters. Furthermore, a real world implementation of DCR on the University of Delaware Fuel Cell Bus shows that the current fuel cell configuration is undersized for the effective use of DCR. Finally, the LFM simulator is used to perform a Degree-of-Hybridization (DOH) analysis. This analysis involves experimenting with different balances between the power sources available in a hybrid vehicle. It is shown that an optimum balance exists for each driving style, but a significant compromise is needed to cover all driving styles the vehicle is likely to encounter.
Introduction to Hybrid Vehicle System Modeling and Control by Wei Liu Pdf
This is an engineering reference book on hybrid vehicle system analysis and design, an outgrowth of the author's substantial work in research, development and production at the National Research Council Canada, Azure Dynamics and now General Motors. It is an irreplaceable tool for helping engineers develop algorithms and gain a thorough understanding of hybrid vehicle systems. This book covers all the major aspects of hybrid vehicle modeling, control, simulation, performance analysis and preliminary design. It not only systemically provides the basic knowledge of hybrid vehicle system configuration and main components, but also details their characteristics and mathematic models. Provides valuable technical expertise necessary for building hybrid vehicle system and analyzing performance via drivability, fuel economy and emissions Built from the author's industry experience at major vehicle companies including General Motors and Azure Dynamics Inc. Offers algorithm implementations and figures/examples extracted from actual practice systems Suitable for a training course on hybrid vehicle system development with supplemental materials An essential resource enabling hybrid development and design engineers to understand the hybrid vehicle systems necessary for control algorithm design and developments.
Modern Electric, Hybrid Electric, and Fuel Cell Vehicles by Mehrdad Ehsani,Yimin Gao,Stefano Longo,Kambiz Ebrahimi Pdf
"This book is an introduction to automotive technology, with specic reference to battery electric, hybrid electric, and fuel cell electric vehicles. It could serve electrical engineers who need to know more about automobiles or automotive engineers who need to know about electrical propulsion systems. For example, this reviewer, who is a specialist in electric machinery, could use this book to better understand the automobiles for which the reviewer is designing electric drive motors. An automotive engineer, on the other hand, might use it to better understand the nature of motors and electric storage systems for application in automobiles, trucks or motorcycles. The early chapters of the book are accessible to technically literate people who need to know something about cars. While the rst chapter is historical in nature, the second chapter is a good introduction to automobiles, including dynamics of propulsion and braking. The third chapter discusses, in some detail, spark ignition and compression ignition (Diesel) engines. The fourth chapter discusses the nature of transmission systems.” —James Kirtley, Massachusetts Institute of Technology, USA “The third edition covers extensive topics in modern electric, hybrid electric, and fuel cell vehicles, in which the profound knowledge, mathematical modeling, simulations, and control are clearly presented. Featured with design of various vehicle drivetrains, as well as a multi-objective optimization software, it is an estimable work to meet the needs of automotive industry.” —Haiyan Henry Zhang, Purdue University, USA “The extensive combined experience of the authors have produced an extensive volume covering a broad range but detailed topics on the principles, design and architectures of Modern Electric, Hybrid Electric, and Fuel Cell Vehicles in a well-structured, clear and concise manner. The volume offers a complete overview of technologies, their selection, integration & control, as well as an interesting Technical Overview of the Toyota Prius. The technical chapters are complemented with example problems and user guides to assist the reader in practical calculations through the use of common scientic computing packages. It will be of interest mainly to research postgraduates working in this eld as well as established academic researchers, industrial R&D engineers and allied professionals.” —Christopher Donaghy-Sparg, Durham University, United Kingdom The book deals with the fundamentals, theoretical bases, and design methodologies of conventional internal combustion engine (ICE) vehicles, electric vehicles (EVs), hybrid electric vehicles (HEVs), and fuel cell vehicles (FCVs). The design methodology is described in mathematical terms, step-by-step, and the topics are approached from the overall drive train system, not just individual components. Furthermore, in explaining the design methodology of each drive train, design examples are presented with simulation results. All the chapters have been updated, and two new chapters on Mild Hybrids and Optimal Sizing and Dimensioning and Control are also included • Chapters updated throughout the text. • New homework problems, solutions, and examples. • Includes two new chapters. • Features accompanying MATLABTM software.
Optimal Control of Hybrid Vehicles by Bram de Jager,Thijs van Keulen,John Kessels Pdf
Optimal Control of Hybrid Vehicles provides a description of power train control for hybrid vehicles. The background, environmental motivation and control challenges associated with hybrid vehicles are introduced. The text includes mathematical models for all relevant components in the hybrid power train. The power split problem in hybrid power trains is formally described and several numerical solutions detailed, including dynamic programming and a novel solution for state-constrained optimal control problems based on the maximum principle. Real-time-implementable strategies that can approximate the optimal solution closely are dealt with in depth. Several approaches are discussed and compared, including a state-of-the-art strategy which is adaptive for vehicle conditions like velocity and mass. Three case studies are included in the book: • a control strategy for a micro-hybrid power train; • experimental results obtained with a real-time strategy implemented in a hybrid electric truck; and • an analysis of the optimal component sizes for a hybrid power train. Optimal Control of Hybrid Vehicles will appeal to academic researchers and graduate students interested in hybrid vehicle control or in the applications of optimal control. Practitioners working in the design of control systems for the automotive industry will also find the ideas propounded in this book of interest.
