Engineering Seismology And Earthquake Engineering

Author : J. Solnes
Publisher : Springer
Page : 332 pages
File Size : 50,8 Mb
Release : 1974-08-31
Category : Science
ISBN : UCAL:B4526130

Get Book

Engineering Seismology and Earthquake Engineering by J. Solnes Pdf

by Julius S6lnes An Advanced Study Institute on engineering seismology and earthquake engineering was held in Izrrir, 'rurkey July 2-13, 1973 under the auspices of the Scientific Affairs Division of NATO. The Institute was organized by an organizing committee headed by the two scientific directors and with representation by the Turkish National Science Foundation, Turkish National Committee for Earthquake Engineering, the Middle East Technical University and the Aegean University. 93 scientists and engineers of 18 countries took part in the work of the Institute which comprised 10 working days with lectures, discussions and panel meetings. The main lecture topics of the Institute were covered in five main sections: 1. Generic causes of earthquakes. 2. Ground motion and foundation response. 3. Earthquake response of structures and design consi derations. 4. Codes and regulations; implementation. 5. Earthquake hazards and emergency planning. Upon completion of each section, general discussion and short presentations by several of the participants took place and summary statements were offered by the main lecturers. The atmosphere of the meetings was in- VI formal and cordial thus giving rise to many unorthodox and newly conceived ideas.

Author : Özdoğan Yilmaz
Publisher : Unknown
Page : 954 pages
File Size : 47,9 Mb
Release : 2015
Category : Earthquake engineering
ISBN : 1560803290

Get Book

Engineering Seismology by Özdoğan Yilmaz Pdf

The scope of engineering seismology includes geotechnical site investigations for buildings and engineering infrastructures, such as dams, levees, bridges, and tunnels, landslide and active-fault investigations, seismic microzonation, and geophysical investigations of historic buildings. These projects require multidisciplinary participation by the geologist, geophysicist, and geotechnical and earthquake engineers. A key objective of this book (SEG Investigations in Geophysics Series No. 17) by Öz Yilmaz is to encourage the specialists from these disciplines to apply the seismic method to solve the many challenging engineering problems they face. The broader scope of engineering seismology also includes exploration of earth resources, including groundwater exploration, coal and mineral exploration, and geothermal exploration. While focusing on the application of the seismic method to geotechnical site investigations, this book includes many case studies in all of the applications of engineering seismology.

Author : Sebastiano D'Amico
Publisher : BoD – Books on Demand
Page : 312 pages
File Size : 53,9 Mb
Release : 2013-03-20
Category : Science
ISBN : 9789535110385

Get Book

Engineering Seismology, Geotechnical and Structural Earthquake Engineering by Sebastiano D'Amico Pdf

The mitigation of earthquake-related hazards represents a key role in the modern society. The mitigation of such kind of hazards spans from detailed studies on seismicity, evaluation of site effects, and seismo-induced landslides, tsunamis as well as and the design and analysis of structures to resist such actions. The study of earthquakes ties together science, technology and expertise in infrastructure and engineering in an effort to minimize human and material losses when they inevitably occur. Chapters deal with different topics aiming to mitigate geo-hazards such as: Seismic hazard analysis, Ground investigation for seismic design, Seismic design, assessment and remediation, Earthquake site response analysis and soil-structure interaction analysis.

Author : Abbas Moustafa
Publisher : BoD – Books on Demand
Page : 412 pages
File Size : 55,9 Mb
Release : 2015-05-20
Category : Technology & Engineering
ISBN : 9789535120391

Get Book

Earthquake Engineering by Abbas Moustafa Pdf

The book Earthquake Engineering - From Engineering Seismology to Optimal Seismic Design of Engineering Structures contains fifteen chapters written by researchers and experts in the fields of earthquake and structural engineering. This book provides the state-of-the-art on recent progress in the field of seimology, earthquake engineering and structural engineering. The book should be useful to graduate students, researchers and practicing structural engineers. It deals with seismicity, seismic hazard assessment and system oriented emergency response for abrupt earthquake disaster, the nature and the components of strong ground motions and several other interesting topics, such as dam-induced earthquakes, seismic stability of slopes and landslides. The book also tackles the dynamic response of underground pipes to blast loads, the optimal seismic design of RC multi-storey buildings, the finite-element analysis of cable-stayed bridges under strong ground motions and the acute psychiatric trauma intervention due to earthquakes.

Author : Yousef Bozorgnia,Vitelmo V. Bertero
Publisher : CRC Press
Page : 958 pages
File Size : 49,5 Mb
Release : 2004-05-11
Category : Technology & Engineering
ISBN : 9780203486245

Get Book

Earthquake Engineering by Yousef Bozorgnia,Vitelmo V. Bertero Pdf

This multi-contributor book provides comprehensive coverage of earthquake engineering problems, an overview of traditional methods, and the scientific background on recent developments. It discusses computer methods on structural analysis and provides access to the recent design methodologies and serves as a reference for both professionals and res

Author : J. Solnes
Publisher : Springer
Page : 332 pages
File Size : 52,5 Mb
Release : 1974-08-31
Category : Science
ISBN : UCAL:B4526130

Get Book

Engineering Seismology and Earthquake Engineering by J. Solnes Pdf

by Julius S6lnes An Advanced Study Institute on engineering seismology and earthquake engineering was held in Izrrir, 'rurkey July 2-13, 1973 under the auspices of the Scientific Affairs Division of NATO. The Institute was organized by an organizing committee headed by the two scientific directors and with representation by the Turkish National Science Foundation, Turkish National Committee for Earthquake Engineering, the Middle East Technical University and the Aegean University. 93 scientists and engineers of 18 countries took part in the work of the Institute which comprised 10 working days with lectures, discussions and panel meetings. The main lecture topics of the Institute were covered in five main sections: 1. Generic causes of earthquakes. 2. Ground motion and foundation response. 3. Earthquake response of structures and design consi derations. 4. Codes and regulations; implementation. 5. Earthquake hazards and emergency planning. Upon completion of each section, general discussion and short presentations by several of the participants took place and summary statements were offered by the main lecturers. The atmosphere of the meetings was in- VI formal and cordial thus giving rise to many unorthodox and newly conceived ideas.

Author : Nato Advanced Study Institute, Izmir, 1973
Publisher : Unknown
Page : 0 pages
File Size : 44,7 Mb
Release : 1974
Category : Buildings
ISBN : LCCN:10064697

Get Book

Engineering Seismology and Earthquake Engineering by Nato Advanced Study Institute, Izmir, 1973 Pdf

Author : Sinan Akkar,Polat Gülkan,Torild van Eck
Publisher : Springer Science & Business Media
Page : 281 pages
File Size : 55,5 Mb
Release : 2011-01-03
Category : Nature
ISBN : 9789400701526

Get Book

Earthquake Data in Engineering Seismology by Sinan Akkar,Polat Gülkan,Torild van Eck Pdf

This book addresses current activities in strong-motion networks around the globe, covering issues related to designing, maintaining and disseminating information from these arrays. The book is divided into three principal sections. The first section includes recent developments in regional and global ground-motion predictive models. It presents discussions on the similarities and differences of ground motion estimations from these models and their application to design spectra as well as other novel procedures for predicting engineering parameters in seismic regions with sparse data. The second section introduces topics about the particular methodologies being implemented in the recently established global and regional strong-motion databanks in Europe to maintain and disseminate the archived accelerometric data. The final section describes major strong-motion arrays around the world and their historical developments. The last three chapters of this section introduce projects carried out within the context of arrays deployed for seismic risk studies in metropolitan areas. Audience: This timely book will be of particular interest for researchers who use accelerometric data extensively to conduct studies in earthquake engineering and engineering seismology.

Author : Halûk Sucuoğlu,Sinan Akkar
Publisher : Springer
Page : 288 pages
File Size : 49,6 Mb
Release : 2014-05-09
Category : Science
ISBN : 9783319010267

Get Book

Basic Earthquake Engineering by Halûk Sucuoğlu,Sinan Akkar Pdf

This book provides senior undergraduate students, master students and structural engineers who do not have a background in the field with core knowledge of structural earthquake engineering that will be invaluable in their professional lives. The basics of seismotectonics, including the causes, magnitude, and intensity of earthquakes, are first explained. Then the book introduces basic elements of seismic hazard analysis and presents the concept of a seismic hazard map for use in seismic design. Subsequent chapters cover key aspects of the response analysis of simple systems and building structures to earthquake ground motions, design spectrum, the adoption of seismic analysis procedures in seismic design codes, seismic design principles and seismic design of reinforced concrete structures. Helpful worked examples on seismic analysis of linear, nonlinear and base isolated buildings, earthquake-resistant design of frame and frame-shear wall systems are included, most of which can be solved using a hand calculator.

Author : André Filiatrault
Publisher : Presses inter Polytechnique
Page : 876 pages
File Size : 40,8 Mb
Release : 2013
Category : Buildings
ISBN : 9782553016493

Get Book

Elements of Earthquake Engineering and Structural Dynamics by André Filiatrault Pdf

"In order to reduce the seismic risk facing many densely populated regions worldwide, including Canada and the United States, modern earthquake engineering should be more widely applied. But current literature on earthquake engineering may be difficult to grasp for structural engineers who are untrained in seismic design. In addition no single resource addressed seismic design practices in both Canada and the United States until now. Elements of Earthquake Engineering and Structural Dynamics was written to fill the gap. It presents the key elements of earthquake engineering and structural dynamics at an introductory level and gives readers the basic knowledge they need to apply the seismic provisions contained in Canadian and American building codes."--Résumé de l'éditeur.

Author : Amr S. Elnashai,Luigi Di Sarno
Publisher : John Wiley & Sons
Page : 493 pages
File Size : 41,6 Mb
Release : 2015-09-28
Category : Science
ISBN : 9781118678923

Get Book

Fundamentals of Earthquake Engineering by Amr S. Elnashai,Luigi Di Sarno Pdf

Fundamentals of Earthquake Engineering: From Source to Fragility, Second Edition combines aspects of engineering seismology, structural and geotechnical earthquake engineering to assemble the vital components required for a deep understanding of response of structures to earthquake ground motion, from the seismic source to the evaluation of actions and deformation required for design, and culminating with probabilistic fragility analysis that applies to individual as well as groups of buildings. Basic concepts for accounting for the effects of soil-structure interaction effects in seismic design and assessment are also provided in this second edition. The nature of earthquake risk assessment is inherently multi-disciplinary. Whereas this book addresses only structural safety assessment and design, the problem is cast in its appropriate context by relating structural damage states to societal consequences and expectations, through the fundamental response quantities of stiffness, strength and ductility. This new edition includes material on the nature of earthquake sources and mechanisms, various methods for the characterization of earthquake input motion, effects of soil-structure interaction, damage observed in reconnaissance missions, modeling of structures for the purposes of response simulation, definition of performance limit states, fragility relationships derivation, features and effects of underlying soil, structural and architectural systems for optimal seismic response, and action and deformation quantities suitable for design. Key features: Unified and novel approach: from source to fragility Clear conceptual framework for structural response analysis, earthquake input characterization, modelling of soil-structure interaction and derivation of fragility functions Theory and relevant practical applications are merged within each chapter Contains a new chapter on the derivation of fragility Accompanied by a website containing illustrative slides, problems with solutions and worked-through examples Fundamentals of Earthquake Engineering: From Source to Fragility, Second Edition is designed to support graduate teaching and learning, introduce practising structural and geotechnical engineers to earthquake analysis and design problems, as well as being a reference book for further studies.

Author : Y-X. Hu,S-C. Liu,W. Dong
Publisher : CRC Press
Page : 434 pages
File Size : 41,7 Mb
Release : 1996-07-18
Category : Architecture
ISBN : 041920590X

Get Book

Earthquake Engineering by Y-X. Hu,S-C. Liu,W. Dong Pdf

A unified presentation of engineering seismology and earthquake-resistant design, this book presents a wide ranging coverage of the whole subject of earthquake engineering so that the reader is given a clear appreciation of earthquakes before dealing with their effects on structures. In addition, newer mathematical modelling techniques are introduced which can be powerful tools for assessing and dealing with the risks associated with design and construction in seismic regions.

Author : Michael N. Fardis
Publisher : Springer Science & Business Media
Page : 481 pages
File Size : 52,8 Mb
Release : 2010-07-05
Category : Technology & Engineering
ISBN : 9789048187461

Get Book

Advances in Performance-Based Earthquake Engineering by Michael N. Fardis Pdf

Performance-based Earthquake Engineering has emerged before the turn of the century as the most important development in the field of Earthquake Engineering during the last three decades. It has since then started penetrating codes and standards on seismic assessment and retrofitting and making headway towards seismic design standards for new structures as well. The US have been a leader in Performance-based Earthquake Engineering, but also Europe is a major contributor. Two Workshops on Performance-based Earthquake Engineering, held in Bled (Slovenia) in 1997 and 2004 are considered as milestones. The ACES Workshop in Corfu (Greece) of July 2009 builds on them, attracting as contributors world-leaders in Performance-based Earthquake Engineering from North America, Europe and the Pacific rim (Japan, New Zealand, Taiwan, China). It covers the entire scope of Performance-based Earthquake Engineering: Ground motions for performance-based earthquake engineering; Methodologies for Performance-based seismic design and retrofitting; Implementation of Performance-based seismic design and retrofitting; and Advanced seismic testing for performance-based earthquake engineering. Audience: This volume will be of interest to scientists and advanced practitioners in structural earthquake engineering, geotechnical earthquake engineering, engineering seismology, and experimental dynamics.

Author : Atilla Ansal
Publisher : Springer
Page : 650 pages
File Size : 41,5 Mb
Release : 2014-09-01
Category : Technology & Engineering
ISBN : 9783319071183

Get Book

Perspectives on European Earthquake Engineering and Seismology by Atilla Ansal Pdf

This book collects 5 keynote and 15 topic lectures presented at the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), held in Istanbul, Turkey, from August 24 to 29, 2014. The conference was organized by the Turkish Earthquake Foundation - Earthquake Engineering Committee and Prime Ministry, Disaster and Emergency Management Presidency under the auspices of the European Association for Earthquake Engineering (EAEE) and European Seismological Commission (ESC). The book’s twenty state-of-the-art papers were written by the most prominent researchers in Europe and address a comprehensive collection of topics on earthquake engineering, as well as interdisciplinary subjects such as engineering seismology and seismic risk assessment and management. Further topics include engineering seismology, geotechnical earthquake engineering, seismic performance of buildings, earthquake-resistant engineering structures, new techniques and technologies and managing risk in seismic regions. The book also presents the Third Ambraseys Distinguished Award Lecture given by Prof. Robin Spence in honor of Prof. Nicholas N. Ambraseys. The aim of this work is to present the state-of-the art and latest practices in the fields of earthquake engineering and seismology, with Europe’s most respected researchers addressing recent and ongoing developments while also proposing innovative avenues for future research and development. Given its cutting-edge content and broad spectrum of topics, the book offers a unique reference guide for researchers in these fields. Audience: This book is of interest to civil engineers in the fields of geotechnical and structural earthquake engineering; scientists and researchers in the fields of seismology, geology and geophysics. Not only scientists, engineers and students, but also those interested in earthquake hazard assessment and mitigation will find in this book the most recent advances.

Author : Atilla Ansal
Publisher : Springer
Page : 455 pages
File Size : 52,5 Mb
Release : 2015-08-28
Category : Science
ISBN : 9783319169644

Get Book

Perspectives on European Earthquake Engineering and Seismology by Atilla Ansal Pdf

This book collects 4 keynote and 15 theme lectures presented at the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), held in Istanbul, Turkey, from August 24 to 29, 2014. The conference was organized by the Turkish Earthquake Foundation - Earthquake Engineering Committee and Prime Ministry, Disaster and Emergency Management Presidency under the auspices of the European Association for Earthquake Engineering (EAEE) and European Seismological Commission (ESC). The book’s nineteen state-of-the-art chapters were written by the most prominent researchers in Europe and address a comprehensive collection of topics on earthquake engineering, as well as interdisciplinary subjects such as engineering seismology and seismic risk assessment and management. Further topics include engineering seismology, geotechnical earthquake engineering, seismic performance of buildings, earthquake-resistant engineering structures, new techniques and technologies, and managing risk in seismic regions. The book also presents the First Professor Inge Lehmann Distinguished Award Lecture given by Prof. Shamita Das in honor of Prof. Dr. Inge Lehmann. The aim of this work is to present the state-of-the art and latest practices in the fields of earthquake engineering and seismology, with Europe’s most respected researchers addressing recent and ongoing developments while also proposing innovative avenues for future research and development. Given its cutting-edge conten t and broad spectrum of topics, the book offers a unique reference guide for researchers in these fields. Audience: This book is of interest to civil engineers in the fields of geotechnical and structural earthquake engineering; scientists and researchers in the fields of seismology, geology and geophysics. Not only scientists, engineers and students, but also those interested in earthquake hazard assessment and mitigation will find in this book the most recent advances.