Metal Polymer Multi Material Structures And Manufacturing Techniques In Transportation

Author : Sergio T. Amancio-Filho
Publisher : MDPI
Page : 184 pages
File Size : 47,6 Mb
Release : 2020-12-10
Category : Science
ISBN : 9783039361502

Get Book

Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation by Sergio T. Amancio-Filho Pdf

The reduction of greenhouse gas emissions—particularly from fossil fuel-powered vehicles and airplanes by means of weight savings and leaner fuel consumption, helps to restrain environmental impacts. In general, for a variety of industries, and specifically in the case of transport, where both weight savings and increased energy efficiency are pursued, the use of metal–polymer multi-material structures has been growing at an increasing and particularly fast pace in recent years. Several manufacturing techniques have been, or are being, developed, with the aim of being used for producing dissimilar materials in cost-efficient manners. This book presents recent developments in the state of the art of advanced additive manufacturing and the joining of metal–polymer multi-material structures in transportation. This publication mainly focuses on the correlations between microstructure, manufacturing process (i.e., AddJoining, adhesive bonding, friction riveting, friction-based staking and friction spot joining) properties, and the mechanical performance of metal–polymer multi-material structures.

Author : Sergio T. Amancio-Filho
Publisher : Unknown
Page : 186 pages
File Size : 51,7 Mb
Release : 2020
Category : Electronic
ISBN : 3039361511

Get Book

Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation by Sergio T. Amancio-Filho Pdf

The reduction of greenhouse gas emissions--particularly from fossil fuel-powered vehicles and airplanes by means of weight savings and leaner fuel consumption, helps to restrain environmental impacts. In general, for a variety of industries, and specifically in the case of transport, where both weight savings and increased energy efficiency are pursued, the use of metal-polymer multi-material structures has been growing at an increasing and particularly fast pace in recent years. Several manufacturing techniques have been, or are being, developed, with the aim of being used for producing dissimilar materials in cost-efficient manners. This book presents recent developments in the state of the art of advanced additive manufacturing and the joining of metal-polymer multi-material structures in transportation. This publication mainly focuses on the correlations between microstructure, manufacturing process (i.e., AddJoining, adhesive bonding, friction riveting, friction-based staking and friction spot joining) properties, and the mechanical performance of metal-polymer multi-material structures.

Author : Marco Bittencourt
Publisher : Springer Nature
Page : 230 pages
File Size : 50,9 Mb
Release : 2024-06-07
Category : Electronic
ISBN : 9783031598043

Get Book

Proceedings of the 8th International Symposium on Solid Mechanics by Marco Bittencourt Pdf

Author : Dirk Lehmhus,Matthias Busse,Axel Herrmann,Kambiz Kayvantash
Publisher : John Wiley & Sons
Page : 500 pages
File Size : 53,9 Mb
Release : 2013-08-07
Category : Technology & Engineering
ISBN : 9783527649860

Get Book

Structural Materials and Processes in Transportation by Dirk Lehmhus,Matthias Busse,Axel Herrmann,Kambiz Kayvantash Pdf

Lightness, efficiency, durability and economic as well as ecological viability are key attributes required from materials today. In the transport industry, the performance needs are felt exceptionally strongly. This handbook and ready reference covers the use of structural materials throughout this industry, particularly for the road, air and rail sectors. A strong focus is placed on the latest developments in materials engineering. The authors present new insights and trends, providing firsthand information from the perspective of universities, Fraunhofer and independent research institutes, aerospace and automotive companies and suppliers. Arranged into parts to aid the readers in finding the information relevant to their needs: * Metals * Polymers * Composites * Cellular Materials * Modeling and Simulation * Higher Level Trends

Author : Luigi Carrino,Luigi Maria Galantucci,Luca Settineri
Publisher : Springer Nature
Page : 339 pages
File Size : 53,8 Mb
Release : 2023-08-31
Category : Technology & Engineering
ISBN : 9783031411632

Get Book

Selected Topics in Manufacturing by Luigi Carrino,Luigi Maria Galantucci,Luca Settineri Pdf

This book presents selected contributions covering various scientific and technological areas by AITeM (Italian Manufacturing Association). The first part, "AITeM Young Researcher Award 2023," written by young AITeM associates, reflects the multifaceted nature of manufacturing research. It explores emerging technologies and interdisciplinary connections to go beyond product fabrication, developing a complex value creation ecosystem for high-value-added global competition. Topics include additive manufacturing, materials processing technology, assembly, disassembly, circular economy, manufacturing systems design and management, quality engineering, production metrology, process and system simulation, optimization, and digital manufacturing. The second part, "White Papers," features five contributions on emerging trends in manufacturing. These papers are prepared by Working Groups focusing on strategic research topics in the manufacturing sector, including metallic prosthetic implants, lasers in electric mobility, digital twins, naval and marine applications, and surface functionalization in biomedical implants. These papers provide an overview of challenges in these frontier areas, highlighting the need for a multidisciplinary and innovative approach from the community to successfully address them.

Author : Teruo Kishi
Publisher : Springer Nature
Page : 381 pages
File Size : 54,5 Mb
Release : 2023-07-27
Category : Technology & Engineering
ISBN : 9789819935222

Get Book

Innovative Structural Materials by Teruo Kishi Pdf

This book is devoted to innovative structural materials for multi-materialization. It is based on results of a 10-year national project, The Innovative Structural Materials Research and Development Project, which was carried out in Japan, aimed at reducing the weight of materials (steel, aluminum alloys, magnesium alloys, titanium alloys, thermoplastic CFRP, carbon fiber) and components used in transportation equipment such as automobiles. In this project, collaborative research in a total of nine fields including materials, joining, and structural designing was also carried out in order to realize multi-materials. This book is compiled with the aim of handing down the technical and academic results obtained through these research and development activities to the next generation of researchers and students. This book enables material engineers and researchers in the field of materials related to transportation equipment, graduate students in various technical fields, and engineers and researchers belonging to material users to grasp the full picture of material development and multi-materials technologies. For the understanding of engineers and researchers who will work on multi-materials, this book explains the current state of technology and science in each field and explains the innovative results obtained by research in each field.

Author : James Njuguna
Publisher : Woodhead Publishing
Page : 474 pages
File Size : 53,8 Mb
Release : 2016-01-22
Category : Technology & Engineering
ISBN : 9781782423430

Get Book

Lightweight Composite Structures in Transport by James Njuguna Pdf

Lightweight Composite Structures in Transport: Design, Manufacturing, Analysis and Performance provides a detailed review of lightweight composite materials and structures and discusses their use in the transport industry, specifically surface and air transport. The book covers materials selection, the properties and performance of materials, and structures, design solutions, and manufacturing techniques. A broad range of different material classes is reviewed with emphasis on advanced materials. Chapters in the first two parts of the book consider the lightweight philosophy and current developments in manufacturing techniques for lightweight composite structures in the transport industry, with subsequent chapters in parts three to five discussing structural optimization and analysis, properties, and performance of lightweight composite structures, durability, damage tolerance and structural integrity. Final chapters present case studies on lightweight composite design for transport structures. Comprehensively covers materials selection, design solutions, manufacturing techniques, structural analysis, and performance of lightweight composite structures in the transport industry Includes commentary from leading industrial and academic experts in the field who present cutting-edge research on advanced lightweight materials for the transport industry Includes case studies on lightweight composite design for transport structures

Author : Kiran N. Solanki,Dmytro Orlov,Alok Singh,Neale R. Neelameggham
Publisher : Springer
Page : 689 pages
File Size : 45,5 Mb
Release : 2017-02-14
Category : Technology & Engineering
ISBN : 9783319523927

Get Book

Magnesium Technology 2017 by Kiran N. Solanki,Dmytro Orlov,Alok Singh,Neale R. Neelameggham Pdf

The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.

Author : Colin Tong
Publisher : Springer
Page : 911 pages
File Size : 46,5 Mb
Release : 2018-12-12
Category : Technology & Engineering
ISBN : 9783319980027

Get Book

Introduction to Materials for Advanced Energy Systems by Colin Tong Pdf

This first of its kind text enables today’s students to understand current and future energy challenges, to acquire skills for selecting and using materials and manufacturing processes in the design of energy systems, and to develop a cross-functional approach to materials, mechanics, electronics and processes of energy production. While taking economic and regulatory aspects into account, this textbook provides a comprehensive introduction to the range of materials used for advanced energy systems, including fossil, nuclear, solar, bio, wind, geothermal, ocean and hydropower, hydrogen, and nuclear, as well as thermal energy storage and electrochemical storage in fuel cells. A separate chapter is devoted to emerging energy harvesting systems. Integrated coverage includes the application of scientific and engineering principles to materials that enable different types of energy systems. Properties, performance, modeling, fabrication, characterization and application of structural, functional and hybrid materials are described for each energy system. Readers will appreciate the complex relationships among materials selection, optimizing design, and component operating conditions in each energy system. Research and development trends of novel emerging materials for future hybrid energy systems are also considered. Each chapter is basically a self-contained unit, easily enabling instructors to adapt the book for coursework. This textbook is suitable for students in science and engineering who seek to obtain a comprehensive understanding of different energy processes, and how materials enable energy harvesting, conversion, and storage. In setting forth the latest advances and new frontiers of research, the text also serves as a comprehensive reference on energy materials for experienced materials scientists, engineers, and physicists. Includes pedagogical features such as in-depth side bars, worked-out and end-of- chapter exercises, and many references to further reading Provides comprehensive coverage of materials-based solutions for major and emerging energy systems Brings together diverse subject matter by integrating theory with engaging insights

Author : Damir Godec,Joamin Gonzalez-Gutierrez,Axel Nordin,Eujin Pei,Julia Ureña Alcázar
Publisher : Springer Nature
Page : 347 pages
File Size : 44,5 Mb
Release : 2022-09-12
Category : Technology & Engineering
ISBN : 9783031058639

Get Book

A Guide to Additive Manufacturing by Damir Godec,Joamin Gonzalez-Gutierrez,Axel Nordin,Eujin Pei,Julia Ureña Alcázar Pdf

This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). It is written in an educative style to enable the reader to understand and apply the material. It begins with an introduction to AM technologies and the general workflow, as well as an overview of the current standards within AM. In the following chapter, a more in-depth description is given of design optimization and simulation for AM in polymers and metals, including practical guidelines for topology optimization and the use of lattice structures. Special attention is also given to the economics of AM and when the technology offers a benefit compared to conventional manufacturing processes. This is followed by a chapter with practical insights into how AM materials and processing parameters are developed for both material extrusion and powder bed fusion. The final chapter describes functionally graded AM in various materials and technologies. Throughout the book, a large number of industrial applications are described to exemplify the benefits of AM.

Author : V. Goodship,J. C. Love
Publisher : iSmithers Rapra Publishing
Page : 128 pages
File Size : 50,9 Mb
Release : 2002
Category : Science
ISBN : 9781859573273

Get Book

Multi-material Injection Moulding by V. Goodship,J. C. Love Pdf

Many variations of injection moulding have been developed and one of the rapidly expanding fields is multi-material injection moulding. This review looks at the many techniques being used, from the terminology to case studies. The three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. The basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology are described.

Author : Stefan Dimov,Wolfgang Menz
Publisher : Elsevier
Page : 537 pages
File Size : 53,7 Mb
Release : 2005-12-07
Category : Technology & Engineering
ISBN : 9780080462554

Get Book

4M 2005 - First International Conference on Multi-Material Micro Manufacture by Stefan Dimov,Wolfgang Menz Pdf

4M 2005 - First International Conference on Multi-Material Micro Manufacture

Author : Sergio T. Amancio Filho,Lucian-Attila Blaga
Publisher : John Wiley & Sons
Page : 416 pages
File Size : 42,9 Mb
Release : 2017-12-21
Category : Technology & Engineering
ISBN : 9781119466772

Get Book

Joining of Polymer-Metal Hybrid Structures by Sergio T. Amancio Filho,Lucian-Attila Blaga Pdf

A comprehensive introduction to the concepts of joining technologies for hybrid structures This book introduces the concepts of joining technology for polymer-metal hybrid structures by addressing current and new joining methods. This is achieved by using a balanced approach focusing on the scientific features (structural, physical, chemical, and metallurgical/polymer science phenomena) and engineering properties (mechanical performance, design, applications, etc.) of the currently available and new joining processes. It covers such topics as mechanical fastening, adhesive bonding, advanced joining methods, and statistical analysis in joining technology. Joining of Polymer-Metal Hybrid Structures: Principles and Applications is structured by joining principles, in adhesion-based, mechanical fastened, and direct-assembly methods. The book discusses such recent technologies as friction riveting, friction spot joining and ultrasonic joining. This is used for applications where the original base material characteristics must remain unchanged. Additional sections cover the main principles of statistical analysis in joining technology (illustrated with examples from the field of polymer-metal joining). Joining methods discussed include mechanical fastening (bolting, screwing, riveting, hinges, and fits of polymers and composites), adhesive bonding, and other advanced joining methods (friction staking, laser welding, induction welding, etc.). Provides a combined engineering and scientific approach used to describe principles, properties, and applications of polymer-metal hybrid joints Describes the current developments in design of experiments and statistical analysis in joining technology with emphasis on joining of polymer-metal hybrid structures Covers recent innovations in joining technology of polymer-metal hybrid joints including friction riveting, friction spot joining, friction staking, and ultrasonic joining Principles illustrated by pictures, 3D-schemes, charts, and drawings using examples from the field of polymer-metal joining Joining of Polymer-Metal Hybrid Structures: Principles and Applications will appeal to chemical, polymer, materials, metallurgical, composites, mechanical, process, product, and welding engineers, scientists and students, technicians, and joining process professionals.

Author : Shashanka Rajendrachari
Publisher : Springer Nature
Page : 338 pages
File Size : 42,5 Mb
Release : 2023-09-30
Category : Technology & Engineering
ISBN : 9789819959495

Get Book

Practical Implementations of Additive Manufacturing Technologies by Shashanka Rajendrachari Pdf

This book gives in-depth information about evolution of additive manufacturing from a few decades to the present explaining how the technology has been improved with time and its practical implementation of the technology in various applications and industries. It describes the different types of additive manufacturing methods used to prepare materials and their advantages, followed by the limitations. This includes the fabrication of metal, polymer, biomaterial, hybrid nanomaterial, smart material, and ceramic materials using additive manufacturing methods used in many applications such as 3D printed batteries, supercapacitors, electrochemical sensors, biosensors, aircraft interior components, rocket engines components, automobile components, and medical implants. It also describes advanced applications of additive manufacturing materials in the construction, biomedical, and sports industries. In addition, the book also deep dives into the environmental impact and economic benefits of additive manufacturing industries. A special chapter is included to give an overview on the general type of job opportunities for engineering graduates and research scholars seeking to find employment in additive manufacturing companies. In short, the content of this book targets primarily researchers, engineering students (bachelors and masters), and industrial engineers.

Author : Anna Carla Araujo,Arthur Cantarel,France Chabert,Adrian Korycki,Philippe Olivier,Fabrice Schmidt
Publisher : Materials Research Forum LLC
Page : 2957 pages
File Size : 54,8 Mb
Release : 2024-05-20
Category : Technology & Engineering
ISBN : 9781644903131

Get Book

Material Forming by Anna Carla Araujo,Arthur Cantarel,France Chabert,Adrian Korycki,Philippe Olivier,Fabrice Schmidt Pdf

These ESAFORM 2024 conference proceedings cover a wide range of topics: Additive manufacturing; Composites forming processes; Extrusion and drawing; Forging and rolling; Formability of metallic materials; Friction and wear in metal forming; Incremental and sheet metal forming; Innovative joining by forming technologies; Optimization and inverse analysis in forming; Machining, Cutting and severe plastic deformation processes; Material behavior modelling; New and advanced numerical strategies for material forming; Non-conventional processes; Polymer processing and thermomechanical properties; Sustainability on material forming. Keywords: WAAM Technology, Fused deposition Modeling (FDM), Fiber Composite Printers, Ultrasonic Powder Atomization, Finite Element Modeling (FEM), Laser Powder Bed Fusion (L-PBF), Rapid Prototyping in Additive Manufacturing, Directed Energy Deposition (DED), GTAW Droplet Deposition, Deep Learning, Thermoplastic Pultrusion, Textile Reinforcements, Thermoforming Simulation, New Sustainable Materials, Non-Crimp Fabrics, CFRP Scraps, PEEK Composites, Thermoplastic Sheets, Flax/PP Composites.